lkml.org 
[lkml]   [2019]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [Sound-open-firmware] [PATCH v2 3/5] ASoC: SOF: Add DT DSP device support
On Wed, Jul 24, 2019 at 10:04 AM Daniel Baluta <daniel.baluta@gmail.com> wrote:
>
> On Tue, Jul 23, 2019 at 6:19 PM Pierre-Louis Bossart
> <pierre-louis.bossart@linux.intel.com> wrote:
> >
> >
> > > diff --git a/sound/soc/sof/Kconfig b/sound/soc/sof/Kconfig
> > > index 61b97fc55bb2..2aa3a1cdf60c 100644
> > > --- a/sound/soc/sof/Kconfig
> > > +++ b/sound/soc/sof/Kconfig
> > > @@ -36,6 +36,15 @@ config SND_SOC_SOF_ACPI
> > > Say Y if you need this option
> > > If unsure select "N".
> > >
> > > +config SND_SOC_SOF_DT
> > > + tristate "SOF DT enumeration support"
> > > + select SND_SOC_SOF
> > > + select SND_SOC_SOF_OPTIONS
> > > + help
> > > + This adds support for Device Tree enumeration. This option is
> > > + required to enable i.MX8 devices.
> > > + Say Y if you need this option. If unsure select "N".
> > > +
> >
> > [snip]
> >
> > > diff --git a/sound/soc/sof/imx/Kconfig b/sound/soc/sof/imx/Kconfig
> > > index fff64a9970f0..fa35994a79c4 100644
> > > --- a/sound/soc/sof/imx/Kconfig
> > > +++ b/sound/soc/sof/imx/Kconfig
> > > @@ -12,6 +12,7 @@ if SND_SOC_SOF_IMX_TOPLEVEL
> > >
> > > config SND_SOC_SOF_IMX8
> > > tristate "SOF support for i.MX8"
> > > + select SND_SOC_SOF_DT
> >
> > This looks upside down. You should select SOF_DT first then include the
> > NXP stuff.
> >
> > > help
> > > This adds support for Sound Open Firmware for NXP i.MX8 platforms
> > > Say Y if you have such a device.
> > > diff --git a/sound/soc/sof/sof-dt-dev.c b/sound/soc/sof/sof-dt-dev.c
> > > new file mode 100644
> > > index 000000000000..31429bbb5c7e
> > > --- /dev/null
> > > +++ b/sound/soc/sof/sof-dt-dev.c
> > > @@ -0,0 +1,159 @@
> > > +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
> > > +//
> > > +// Copyright 2019 NXP
> > > +//
> > > +// Author: Daniel Baluta <daniel.baluta@nxp.com>
> > > +//
> > > +
> > > +#include <linux/firmware.h>
> > > +#include <linux/module.h>
> > > +#include <linux/pm_runtime.h>
> > > +#include <sound/sof.h>
> > > +
> > > +#include "ops.h"
> > > +
> > > +extern struct snd_sof_dsp_ops sof_imx8_ops;
> > > +
> > > +static char *fw_path;
> > > +module_param(fw_path, charp, 0444);
> > > +MODULE_PARM_DESC(fw_path, "alternate path for SOF firmware.");
> > > +
> > > +static char *tplg_path;
> > > +module_param(tplg_path, charp, 0444);
> > > +MODULE_PARM_DESC(tplg_path, "alternate path for SOF topology.");
> > > +
> > > +/* platform specific devices */
> > > +#if IS_ENABLED(CONFIG_SND_SOC_SOF_IMX8)
> > > +static struct sof_dev_desc sof_dt_imx8qxp_desc = {
> > > + .default_fw_path = "imx/sof",
> > > + .default_tplg_path = "imx/sof-tplg",
> > > + .nocodec_fw_filename = "sof-imx8.ri",
> > > + .nocodec_tplg_filename = "sof-imx8-nocodec.tplg",
> > > + .ops = &sof_imx8_ops,
> > > +};
> > > +#endif
> > > +
> > > +static const struct dev_pm_ops sof_dt_pm = {
> > > + SET_SYSTEM_SLEEP_PM_OPS(snd_sof_suspend, snd_sof_resume)
> > > + SET_RUNTIME_PM_OPS(snd_sof_runtime_suspend, snd_sof_runtime_resume,
> > > + NULL)
> > > +};
> > > +
> > > +static void sof_dt_probe_complete(struct device *dev)
> > > +{
> > > + /* allow runtime_pm */
> > > + pm_runtime_set_autosuspend_delay(dev, SND_SOF_SUSPEND_DELAY_MS);
> > > + pm_runtime_use_autosuspend(dev);
> > > + pm_runtime_enable(dev);
> > > +}
> > > +
> > > +static int sof_dt_probe(struct platform_device *pdev)
> > > +{
> > > + struct device *dev = &pdev->dev;
> > > + const struct sof_dev_desc *desc;
> > > + /*TODO: create a generic snd_soc_xxx_mach */
> > > + struct snd_soc_acpi_mach *mach;
> >
> > I wonder if you really need to use the same structures. For Intel we get
> > absolutely zero info from the firmware so rely on an ACPI codec ID as a
> > key to find information on which firmware and topology to use, and which
> > machine driver to load. You could have all this information in a DT blob?
>
> Yes. I see your point. I will still need to make a generic structure for
> snd_soc_acpi_mach so that everyone can use sof_nocodec_setup function.
>
> Maybe something like this:
>
> struct snd_soc_mach {
> union {
> struct snd_soc_acpi_mach acpi_mach;
> struct snd_soc_of_mach of_mach;
> }
> };
>
> and then change the prototype of sof_nocodec_setup.

Hi Pierre,

I fixed all the comments except the one above. Replacing snd_soc_acpi_mach
with a generic snd_soc_mach is not trivial task.

I wonder if it is acceptable to get the initial patches as they are
now and later switch to
generic ACPI/OF abstraction.

Asking this because for the moment on the i.MX side I have only
implemented no codec
version and we don't probe any of the machine drivers we have.

So, there is this only one member of snd_soc_acpi_mach that imx
version is making use of:

mach->drv_name = "sof-nocodec";

That's all.

I think the change as it is now is very clean and non-intrusive. Later
we will get options to
read firmware name and stuff from DT.

Anyhow, I don't think we can get rid of snd_dev_desc structure on
i.MX. This will be used
to store the information read from DT:

static struct sof_dev_desc sof_of_imx8qxp_desc = {
» .default_fw_path = "imx/sof",
» .default_tplg_path = "imx/sof-tplg",
» .nocodec_fw_filename = "sof-imx8.ri",
» .nocodec_tplg_filename = "sof-imx8-nocodec.tplg",
» .ops = &sof_imx8_ops,
};

For the moment we will only use the default values.

thanks,
Daniel.

\
 
 \ /
  Last update: 2019-08-07 16:40    [W:0.156 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site