lkml.org 
[lkml]   [2019]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH 1/2] dt-bindings: net: macb: Add new property for PS SGMII only
Hi Andrew,

On Sun, Aug 4, 2019 at 8:26 PM Andrew Lunn <andrew@lunn.ch> wrote:
>
> On Wed, Jul 31, 2019 at 03:10:32PM +0530, Harini Katakam wrote:
> > Add a new property to indicate when PS SGMII is used with NO
> > external PHY on board.
>
> Hi Harini
>
> What exactly is you use case? Are you connecting to a Ethernet switch?
> To an SFP cage with a copper module?

Yes, an SFP cage is the common HW target for this patch. Essentially, there
is no external PHY driver that the macb can "connect" to; if there was an
external PHY on board, its link status would also indicate when the GEM(PCS)
to external PHY link was down. But in the absence of an external PHY on
HW, PCS link status needs to be monitored and reported to users.

Regards,
Harini

\
 
 \ /
  Last update: 2019-08-05 08:16    [W:0.057 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site