lkml.org 
[lkml]   [2019]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] phy: qcom-qmp: Correct READY_STATUS poll break condition
On Fri 19 Jul 08:50 PDT 2019, Marc Gonzalez wrote:

> On 13/06/2019 11:10, Marc Gonzalez wrote:
>
> > Here are my observations for a 8998 board:
> >
> > 1) If I apply only the readl_poll_timeout() fix (not the mask_pcs_ready fixup)
> > qcom_pcie_probe() fails with a timeout in phy_init.
> > => this is in line with your regression analysis.
> >
> > 2) Your patch also fixes a long-standing bug in UFS init whereby sending
> > lots of information to the console during phy init would lead to an
> > incorrectly diagnosed time-out.
> >
> > Good stuff!
> >
> > Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
> > Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
>
> It looks like this patch fixed UFS, but broke PCIe and USB3 ^_^
>
> qcom-qmp-phy 1c06000.phy: Registered Qcom-QMP phy
> qcom-qmp-phy c010000.phy: Registered Qcom-QMP phy
> qcom-qmp-phy 1da7000.phy: Registered Qcom-QMP phy
>
> qcom-qmp-phy 1c06000.phy: BEFORE=000000a6 AFTER=000000a6
> qcom-qmp-phy 1c06000.phy: phy initialization timed-out
> phy phy-1c06000.phy.0: phy init failed --> -110
> qcom-pcie: probe of 1c00000.pci failed with error -110
>
> qcom-qmp-phy 1da7000.phy: BEFORE=00000040 AFTER=0000000d
>
> qcom-qmp-phy c010000.phy: BEFORE=69696969 AFTER=b7b7b7b7
> qcom-qmp-phy c010000.phy: phy initialization timed-out
> phy phy-c010000.phy.1: phy init failed --> -110
> dwc3 a800000.dwc3: failed to initialize core: -110
> dwc3: probe of a800000.dwc3 failed with error -110
>
>
> Downstream code for PCIe is:
>
> static bool pcie_phy_is_ready(struct msm_pcie_dev_t *dev)
> {
> if (dev->phy_ver >= 0x20) {
> if (readl_relaxed(dev->phy + PCIE_N_PCS_STATUS(dev->rc_idx, dev->common_phy)) & BIT(6))
> return false;
> else
> return true;
> }
>
> if (!(readl_relaxed(dev->phy + PCIE_COM_PCS_READY_STATUS) & 0x1))
> return false;
> else
> return true;
> }
>
> AFAICT:
> PCIe and USB3 QMP PHYs are ready when PHYSTATUS=BIT(6) goes to 0.
> But UFS is ready when PCS_READY=BIT(0) goes to 1.
>
>
> Can someone verify that USB3 is broken on 845 with 885bd765963b?
>

Both USB3 and PCIe still works for me on 845, but you are correct;
PHYSTATUS is ready low, while PCS_READY is ready high.

I posted a patch that attempts to clean up the differences, please give
it a spin (and review).

Regards,
Bjorn

\
 
 \ /
  Last update: 2019-08-06 02:44    [W:0.087 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site