lkml.org 
[lkml]   [2019]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5, 11/32] drm/mediatek: split DISP_REG_CONFIG_DSI_SEL setting into another use case
Date
From: Yongqiang Niu <yongqiang.niu@mediatek.com>

Here is two modifition in this patch:
1.bls->dpi0 and rdma1->dsi are differen usecase,
Split DISP_REG_CONFIG_DSI_SEL setting into anther usecase
2.remove DISP_REG_CONFIG_DPI_SEL setting, DPI_SEL_IN_BLS is 0 and
this is same with hardware defautl setting,

Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 4866a9b..c93e1b7 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -392,10 +392,9 @@ static void mtk_ddp_sout_sel(void __iomem *config_regs,
} else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
writel_relaxed(BLS_TO_DPI_RDMA1_TO_DSI,
config_regs + DISP_REG_CONFIG_OUT_SEL);
+ } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI0) {
writel_relaxed(DSI_SEL_IN_RDMA,
config_regs + DISP_REG_CONFIG_DSI_SEL);
- writel_relaxed(DPI_SEL_IN_BLS,
- config_regs + DISP_REG_CONFIG_DPI_SEL);
}
}

--
1.8.1.1.dirty
\
 
 \ /
  Last update: 2019-08-29 16:53    [W:0.232 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site