lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC PATCH] iommu/vt-d: Fix IOMMU field not populated on device hot re-plug
Date
Hi Lu,

On Monday, August 26, 2019 10:29:12 AM CEST Lu Baolu wrote:
> Hi Janusz,
>
> On 8/26/19 4:15 PM, Janusz Krzysztofik wrote:
> > Hi Lu,
> >
> > On Friday, August 23, 2019 3:51:11 AM CEST Lu Baolu wrote:
> >> Hi,
> >>
> >> On 8/22/19 10:29 PM, Janusz Krzysztofik wrote:
> >>> When a perfectly working i915 device is hot unplugged (via sysfs) and
> >>> hot re-plugged again, its dev->archdata.iommu field is not populated
> >>> again with an IOMMU pointer. As a result, the device probe fails on
> >>> DMA mapping error during scratch page setup.
> >>>
> >>> It looks like that happens because devices are not detached from their
> >>> MMUIO bus before they are removed on device unplug. Then, when an
> >>> already registered device/IOMMU association is identified by the
> >>> reinstantiated device's bus and function IDs on IOMMU bus re-attach
> >>> attempt, the device's archdata is not populated with IOMMU information
> >>> and the bad happens.
> >>>
> >>> I'm not sure if this is a proper fix but it works for me so at least it
> >>> confirms correctness of my analysis results, I believe. So far I
> >>> haven't been able to identify a good place where the possibly missing
> >>> IOMMU bus detach on device unplug operation could be added.
> >>
> >> Which kernel version are you testing with? Does it contain below commit?
> >>
> >> commit 458b7c8e0dde12d140e3472b80919cbb9ae793f4
> >> Author: Lu Baolu <baolu.lu@linux.intel.com>
> >> Date: Thu Aug 1 11:14:58 2019 +0800
> >
> > I was using an internal branch based on drm-tip which didn't contain this
> > commit yet. Fortunately it has been already merged into drm-tip over last
> > weekend and has effectively fixed the issue.
>
> Thanks for testing this.

My testing appeared not sufficiently exhaustive. The fix indeed resolved my
initially discovered issue of not being able to rebind the i915 driver to a
re-plugged device, however it brought another, probably more serious problem
to light.

When an open i915 device is hot unplugged, IOMMU bus notifier now cleans up
IOMMU info for the device on PCI device remove while the i915 driver is still
not released, kept by open file descriptors. Then, on last device close,
cleanup attempts lead to kernel panic raised from intel_unmap() on unresolved
IOMMU domain.

With commit 458b7c8e0dde reverted and my fix applied, both late device close
and device re-plug work for me. However, I can realize that's probably still
not a complete solution, possibly missing some protection against reuse of a
removed device other than for cleanup. If you think that's the right way to
go, I can work more on that.

I've had a look at other drivers and found AMD is using somehow similar
approach. On the other hand, looking at the IOMMU common code I couldn't
identify any arrangement that would support deferred device cleanup.

If that approach is not acceptable for Intel IOMMU, please suggest a way you'd
like to have it resolved and I can try to implement it.

Thanks,
Janusz

> Best regards,
> Lu Baolu
>




\
 
 \ /
  Last update: 2019-08-27 11:36    [W:0.042 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site