lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC 0/3] New idle device-tree format and support for versioned stop state
Abhishek Goel's on August 23, 2019 5:09 pm:
> Background
> ------------------
>
> Previously if a older kernel runs on a newer firmware, it may enable
> all available states irrespective of its capability of handling it.
> Consider a case that some stop state has a bug, we end up disabling all
> the stop states. This patch introduces selective control to solve this
> problem.
>
> Previous version of these patches can be found at:
> https://lkml.org/lkml/2018/10/11/544
> These patch however also had patches for support of opal save-restore
> which now I am decoupling and will take them seperately.
> I have posted the corresponding skiboot patches for this kernel patchset
> here : https://patchwork.ozlabs.org/cover/1144587/
>
> What's new?
> --------------------
>
> Add stop states under ibm,idle-states in addition to the current array
> based device tree properties.
>
> New device tree format adds a compatible flag which has version
> corresponding to every state, so that only kernel which has the capability
> to handle the version of stop state will enable it. Drawback of the array
> based dt node is that versioning of idle states is not possible.
>
> Older kernel will still see stop0 and stop0_lite in older format and we
> will deprecate it after some time.
>
> Consider a case that stop4 has a bug. We take the following steps to
> mitigate the problem.
>
> 1) Change compatible string for stop4 in OPAL to "stop4,v2" from
> "stop4,v1", i.e. basicallly bump up the previous version and ship the
> new firmware.
>
> 2) The kernel will ignore stop4 as it won't be able to recognize this
> new version. Kernel will also ignore all the deeper states because its
> possible that a cpu have requested for a deeper state but was never able
> to enter into it. But we will still have shallower states that are there
> before stop 4. This, thus prevents from completely disabling stop states.
>
> Linux kernel can now look at the version string and decide if it has the
> ability to handle that idle state. Henceforth, if kernel does not know
> about a version, it will skip that state and all the deeper state.
>
> Once when the workaround are implemented into the kernel, we can bump up
> the known version in kernel for that state, so that support can be
> enabled once again in kernel.
>
> New Device-tree :
>
> Final output
> power-mgt {
> ...
> ibm,enabled-stop-levels = <0xec000000>;
> ibm,cpu-idle-state-psscr-mask = <0x0 0x3003ff 0x0 0x3003ff>;
> ibm,cpu-idle-state-latencies-ns = <0x3e8 0x7d0>;
> ibm,cpu-idle-state-psscr = <0x0 0x330 0x0 0x300330>;
> ibm,cpu-idle-state-flags = <0x100000 0x101000>;
> ibm,cpu-idle-state-residency-ns = <0x2710 0x4e20>;
> ibm,idle-states {
> stop4 {
> flags = <0x207000>;
> compatible = "stop4,v1",
> psscr-mask = <0x0 0x3003ff>;
> latency-ns = <0x186a0>;
> residency-ns = <0x989680>;
> psscr = <0x0 0x300374>;
> ...
> };
> ...
> stop11 {
> ...
> compatible = "stop11,v1",
> ...
> };
> };

I'm not sure about this. I think the real problem we have is that the
OPAL stop API is not actually implementation independent. Because we
*can* selectively disable stop states in the firmware if there is a
hardware/firmware problem with them.

So we need a way to rev ISA/Book4/OPAL stuff so the kernel won't try
to use it if it's incapable.

We have that today in dt-cpu-ftrs. POWER9 advertises the "idle-stop"
feature. An incompatible implementation could advertise idle-stop-v4.

That won't allow individual states to remain back compatible, but if
there is a new implementation which changes any behaviour it needs to be
incopmatible, even if Linux happens to not rely on said behaviour yet.
So I don't think we can keep any of them (except stop0 lite) compatible,
so I don't see a real downside (we'll have to discuss this offline).

Thanks,
Nick

\
 
 \ /
  Last update: 2019-08-27 11:32    [W:0.041 / U:2.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site