lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [EXT] Re: [v4] rtc: pcf85363/pcf85263: fix error that failed to run hwclock -w
Date
> 
> On 8/27/19 7:37 AM, Biwen Li wrote:
> > - In drivers/rtc/rtc-pcf85363.c, CTRL_STOP_EN is 0x2e, but DT_100THS
> > is 0, max_regiter is 0x2f, then reg will be equal to 0x30,
> > '0x30 < 0x2f' is false,so regmap_writeable will return false.
> >
> > - The pcf85363/pcf85263 has the capability of address wrapping
> > which means if you access a continuous address range across a
> > certain boundary(max_register of struct regmap_config) the
> > hardware actually wraps the access to a lower address. But the
> > address violation check of regmap rejects such access.
>
> nitpick: This 2 paragraphs could be combined to clear up the issue:
>
> `
> The pcf85363/pcf85263 has the capability of address wrapping which means if
> you access an address outside the allowed range
> (0x00-0x2f) the hardware actually wraps the access to a lower address.
> The rtc-pf85363 driver will use this feature to configure the time and execute 2
> actions in the same i2c write operation (stopping the clock and configure the
> time). However the driver has also configured the `regmap maxregister`
> protection mechanism that will block accessing addresses outside valid range
> (0x00-0x2f).
> `
>
> nitpick: I would also use separate buffers for this actions. Up to you :)
>
> Otherwise LGTM +1
Thanks, it's a beautiful explanation.
>
> Nandor
\
 
 \ /
  Last update: 2019-08-27 10:12    [W:0.044 / U:7.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site