Messages in this thread | | | From | Kevin Hilman <> | Subject | Re: [PATCH v2 0/5] 0/6] arm64: meson-sm1: add support for DVFS | Date | Tue, 27 Aug 2019 15:35:11 -0700 |
| |
Kevin Hilman <khilman@baylibre.com> writes:
> Jerome Brunet <jbrunet@baylibre.com> writes: > >> On Mon 26 Aug 2019 at 09:25, Neil Armstrong <narmstrong@baylibre.com> wrote: >> >>> Following DVFS support for the Amlogic G12A and G12B SoCs, this serie >>> enables DVFS on the SM1 SoC for the SEI610 board. >>> >>> The SM1 Clock structure is slightly different because of the Cortex-A55 >>> core used, having the capability for each core of a same cluster to run >>> at a different frequency thanks to the newly used DynamIQ Shared Unit. >>> >>> This is why SM1 has a CPU clock tree for each core and for DynamIQ Shared Unit, >>> with a bypass mux to use the CPU0 instead of the dedicated trees. >>> >>> The DSU uses a new GP1 PLL as default clock, thus GP1 is added as read-only. >>> >>> The SM1 OPPs has been taken from the Amlogic Vendor tree, and unlike >>> G12A only a single version of the SoC is available. >>> >>> Dependencies: >>> - patch 6 is based on the "arm64: meson: add support for SM1 Power Domains" serie, >>> but is not a strong dependency, it will work without >>> >>> Changes since v1: >>> - exposed GP1, DSU and CPU 1,2,3 clock in patch 1 >>> >>> Neil Armstrong (5): >>> dt-bindings: clk: meson: add sm1 periph clock controller bindings >>> clk: meson: g12a: add support for SM1 GP1 PLL >>> clk: meson: g12a: add support for SM1 DynamIQ Shared Unit clock >>> clk: meson: g12a: add support for SM1 CPU 1, 2 & 3 clocks >>> arm64: dts: meson-sm1-sei610: enable DVFS >>> >>> .../bindings/clock/amlogic,gxbb-clkc.txt | 1 + >>> .../boot/dts/amlogic/meson-sm1-sei610.dts | 59 +- >>> arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 69 +++ >>> drivers/clk/meson/g12a.c | 544 ++++++++++++++++++ >>> drivers/clk/meson/g12a.h | 24 +- >>> include/dt-bindings/clock/g12a-clkc.h | 5 + >>> 6 files changed, 697 insertions(+), 5 deletions(-) >> >> Applied 1 to 4 > > Will there be a stable tag I can use for that so I can apply patch 5?
Ah, I should've finished reading the list before asking. I now see your clock PR. I'll use this tag[1] unless there's a different one I should use.
Kevin
[1] git://github.com/BayLibre/clk-meson.git tags/clk-meson-v5.4-2
| |