lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/3] amlogic: arm: add Amlogic SM1 based Khadas VIM3 variant bindings
On Mon, Aug 26, 2019 at 9:42 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
[...]
> >> diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
> >> index b48ea1e4913a..2751dd778ce0 100644
> >> --- a/Documentation/devicetree/bindings/arm/amlogic.yaml
> >> +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
> >> @@ -150,9 +150,10 @@ properties:
> >> - const: amlogic,s922x
> >> - const: amlogic,g12b
> >>
> >> - - description: Boards with the Amlogic Meson SM1 S905X3 SoC
> >> + - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
> >> items:
> >> - enum:
> >> - seirobotics,sei610
> >> + - khadas,vim3
>
> Khadas asked me to rename the board to "vim3l", which is the commercial name,
> should I only change the DT name or also the compatible "khadas,vim3l" ?
I vote for being consistent:
- rename the .dts to vim3l
- and change the compatible string

> >> - const: amlogic,sm1
> > on the GXL we differentiate between S905X and S905D
> > do we need to differentiate S905X3 from S905D3 (for example)?
>
> From a pure SoC die perspective they are the same, exactly like
> the S905X and S905D, only the package changes.
> So only the board DT will determine which eth PHY is used,
> if a DSI panel is connected, a demodulator is connected.. even
> if the underlying package is S905Y3 without any of these pins
> available.
OK, I see - fine for me then
GXL's S905W and/or S805X are the "special cases" then which (AFAIK)
use a different (smaller) package (so it made sense to differentiate
all GXL SoCs)


Martin

\
 
 \ /
  Last update: 2019-08-27 23:19    [W:0.043 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site