lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Continuous SD IO causes hung task messages
On Tue, Aug 27, 2019 at 03:55:23PM +0200, Ulf Hansson wrote:
> On Tue, 27 Aug 2019 at 15:43, Russell King - ARM Linux admin
> <linux@armlinux.org.uk> wrote:
> >
> > Hi,
> >
> > While dd'ing the contents of a SD card, I get hung task timeout
> > messages as per below. However, the dd is making progress. Any
> > ideas?
> >
> > Presumably, mmc_rescan doesn't get a look-in while IO is progressing
> > for the card?
>
> Is it a regression?
>
> There not much of recent mmc core and mmc block changes, that I can
> think of at this point.

No idea - I just repaired the SD socket after the D2 line became
disconnected, and decided to run that command as a test.

> > ARM64 host, Macchiatobin, uSD card.
>
> What mmc host driver is it? mmci?

sdhci-xenon.

I'm just trying with one CPU online, then I'll try with two. My
suspicion is that there's a problem in the ARM64 arch code where
unlocking a mutex doesn't get noticed on other CPUs.

Hmm, I thought I'd try bringing another CPU online, but it seems
like the ARM64 CPU hotplug code is broken:

[ 3552.029689] CPU1: shutdown
[ 3552.031099] psci: CPU1 killed.
[ 3949.835212] CPU1: failed to come online
[ 3949.837753] CPU1: failed in unknown state : 0x0

which means I can only take CPUs down, I can't bring them back
online without rebooting.

--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up

\
 
 \ /
  Last update: 2019-08-27 16:37    [W:0.039 / U:3.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site