lkml.org 
[lkml]   [2019]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/6] powerpc/32s: use CONFIG_PPC_BOOK3S_601 instead of reading PVR
Date
Use CONFIG_PPC_BOOK3S_601 instead of reading PVR to know if
it is a 601 or not.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/head_32.S | 49 +++++++++++++++++++------------------------
arch/powerpc/kernel/misc_32.S | 6 ++----
2 files changed, 24 insertions(+), 31 deletions(-)

diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 9e6f01abb31e..4a24f8f026c7 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -34,7 +34,16 @@

#include "head_32.h"

-/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
+/* 601 only have IBAT */
+#ifdef CONFIG_PPC_BOOK3S_601
+#define LOAD_BAT(n, reg, RA, RB) \
+ li RA,0; \
+ mtspr SPRN_IBAT##n##U,RA; \
+ lwz RA,(n*16)+0(reg); \
+ lwz RB,(n*16)+4(reg); \
+ mtspr SPRN_IBAT##n##U,RA; \
+ mtspr SPRN_IBAT##n##L,RB
+#else
#define LOAD_BAT(n, reg, RA, RB) \
/* see the comment for clear_bats() -- Cort */ \
li RA,0; \
@@ -44,12 +53,11 @@
lwz RB,(n*16)+4(reg); \
mtspr SPRN_IBAT##n##U,RA; \
mtspr SPRN_IBAT##n##L,RB; \
- beq 1f; \
lwz RA,(n*16)+8(reg); \
lwz RB,(n*16)+12(reg); \
mtspr SPRN_DBAT##n##U,RA; \
- mtspr SPRN_DBAT##n##L,RB; \
-1:
+ mtspr SPRN_DBAT##n##L,RB
+#endif

__HEAD
.stabs "arch/powerpc/kernel/",N_SO,0,0,0f
@@ -820,9 +828,6 @@ load_up_mmu:

/* Load the BAT registers with the values set up by MMU_init.
MMU_init takes care of whether we're on a 601 or not. */
- mfpvr r3
- srwi r3,r3,16
- cmpwi r3,1
lis r3,BATS@ha
addi r3,r3,BATS@l
tophys(r3,r3)
@@ -998,11 +1003,8 @@ EXPORT_SYMBOL(switch_mmu_context)
*/
clear_bats:
li r10,0
- mfspr r9,SPRN_PVR
- rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
- cmpwi r9, 1
- beq 1f

+#ifndef CONFIG_PPC_BOOK3S_601
mtspr SPRN_DBAT0U,r10
mtspr SPRN_DBAT0L,r10
mtspr SPRN_DBAT1U,r10
@@ -1011,7 +1013,7 @@ clear_bats:
mtspr SPRN_DBAT2L,r10
mtspr SPRN_DBAT3U,r10
mtspr SPRN_DBAT3L,r10
-1:
+#endif
mtspr SPRN_IBAT0U,r10
mtspr SPRN_IBAT0L,r10
mtspr SPRN_IBAT1U,r10
@@ -1106,10 +1108,7 @@ mmu_off:
*/
initial_bats:
lis r11,PAGE_OFFSET@h
- mfspr r9,SPRN_PVR
- rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
- cmpwi 0,r9,1
- bne 4f
+#ifdef CONFIG_PPC_BOOK3S_601
ori r11,r11,4 /* set up BAT registers for 601 */
li r8,0x7f /* valid, block length = 8MB */
mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */
@@ -1122,10 +1121,8 @@ initial_bats:
addis r8,r8,0x800000@h
mtspr SPRN_IBAT2U,r11
mtspr SPRN_IBAT2L,r8
- isync
- blr
-
-4: tophys(r8,r11)
+#else
+ tophys(r8,r11)
#ifdef CONFIG_SMP
ori r8,r8,0x12 /* R/W access, M=1 */
#else
@@ -1137,10 +1134,10 @@ initial_bats:
mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */
mtspr SPRN_IBAT0L,r8
mtspr SPRN_IBAT0U,r11
+#endif
isync
blr

-
#ifdef CONFIG_BOOTX_TEXT
setup_disp_bat:
/*
@@ -1155,15 +1152,13 @@ setup_disp_bat:
beqlr
lwz r11,0(r8)
lwz r8,4(r8)
- mfspr r9,SPRN_PVR
- rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
- cmpwi 0,r9,1
- beq 1f
+#ifndef CONFIG_PPC_BOOK3S_601
mtspr SPRN_DBAT3L,r8
mtspr SPRN_DBAT3U,r11
- blr
-1: mtspr SPRN_IBAT3L,r8
+#else
+ mtspr SPRN_IBAT3L,r8
mtspr SPRN_IBAT3U,r11
+#endif
blr
#endif /* CONFIG_BOOTX_TEXT */

diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 02d90e1ebf65..b917641cdaa6 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -303,11 +303,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE)
mfspr r3,SPRN_L1CSR1
ori r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR
mtspr SPRN_L1CSR1,r3
+#elif defined(CONFIG_PPC_BOOK3S_601)
+ blr /* for 601, do nothing */
#else
- mfspr r3,SPRN_PVR
- rlwinm r3,r3,16,16,31
- cmpwi 0,r3,1
- beqlr /* for 601, do nothing */
/* 603/604 processor - use invalidate-all bit in HID0 */
mfspr r3,SPRN_HID0
ori r3,r3,HID0_ICFI
--
2.13.3
\
 
 \ /
  Last update: 2019-08-26 17:53    [W:0.089 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site