lkml.org 
[lkml]   [2019]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
Subject[PATCH] tpm: tpm_crb: Add an AMD fTPM support feature
> From: linux-integrity-owner@vger.kernel.org <linux-integrity-
> owner@vger.kernel.org> On Behalf Of Jarkko Sakkinen
> Sent: Monday, August 26, 2019 1:59 AM
> To: Seunghun Han <kkamagui@gmail.com>
> Cc: Peter Huewe <peterhuewe@gmx.de>; Thomas Gleixner
> <tglx@linutronix.de>; linux-kernel@vger.kernel.org; linux-
> integrity@vger.kernel.org
> Subject: EXT: Re: [PATCH] tpm: tpm_crb: Add an AMD fTPM support feature
>
> On Mon, Aug 26, 2019 at 02:40:19AM +0900, Seunghun Han wrote:
> > I'm Seunghun Han and work at the Affiliated Institute of ETRI. I got
> > an AMD system which had a Ryzen Threadripper 1950X and MSI mainboard,
> > and I had a problem with AMD's fTPM. My machine showed an error
> > message below, and the fTPM didn't work because of it.
> >
> > [ 5.732084] tpm_crb MSFT0101:00: can't request region for resource
> > [mem 0x79b4f000-0x79b4ffff]
> > [ 5.732089] tpm_crb: probe of MSFT0101:00 failed with error -16
> >
> > When I saw the iomem areas and found two TPM CRB regions were in the
> > ACPI NVS area. The iomem regions are below.
> >
> > 79a39000-79b6afff : ACPI Non-volatile Storage
> > 79b4b000-79b4bfff : MSFT0101:00
> > 79b4f000-79b4ffff : MSFT0101:00
> >
> > After analyzing this issue, I found out that a busy bit was set to the
> > ACPI NVS area, and the current Linux kernel allowed nothing to be
> > assigned in it. I also found that the kernel couldn't calculate the
> > sizes of command and response buffers correctly when the TPM regions
> were two or more.
> >
> > To support AMD's fTPM, I removed the busy bit from the ACPI NVS area
> > so that AMD's fTPM regions could be assigned in it. I also fixed the
> > bug that did not calculate the sizes of command and response buffer
> correctly.

The problem is that the acpi tables are _wrong_ in this and other cases.
They not only incorrectly report the area as reserved, but also report
the command and response buffer sizes incorrectly. If you look at
the addresses for the buffers listed in the crb control area, the sizes
are correct (4Kbytes). My patch uses the control area values, and
everything works. The remaining problem is that if acpi reports the
area as NVS, then the linux nvs driver will try to use the space.
I'm looking at how to fix that. I'm not sure, if simply removing
the busy bit is sufficient.
Dave

> >
> > Signed-off-by: Seunghun Han <kkamagui@gmail.com>
>
> You need to split this into multiple patches e.g. if you think you've fixed a
> bug, please write a patch with just the bug fix and nothing else.
>
> For further information, read the section three of
>
> https://www.kernel.org/doc/html/latest/process/submitting-patches.html
>
> I'd also recommend to check out the earlier discussion on ACPI NVS:
>
> https://lore.kernel.org/linux-
> integrity/BCA04D5D9A3B764C9B7405BBA4D4A3C035EF7BC7@ALPMBAPA12.e
> 2k.ad.ge.com/
>
> /Jarkko

\
 
 \ /
  Last update: 2019-08-26 14:44    [W:0.063 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site