lkml.org 
[lkml]   [2019]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v3 01/19] skc: Add supplemental kernel cmdline support
Hi Rob,

Thank you for your comment!

On Mon, 26 Aug 2019 08:27:48 -0500
Rob Herring <robh+dt@kernel.org> wrote:

> On Sun, Aug 25, 2019 at 10:15 PM Masami Hiramatsu <mhiramat@kernel.org> wrote:
> >
> > Supplemental kernel command line (SKC) allows admin to pass a
> > tree-structured supplemental kernel commandline file (SKC file)
> > when boot up kernel. This expands the kernel command line in
> > efficient way.
> >
> > SKC file will contain some key-value commands, e.g.
> >
> > key.word = value1;
> > another.key.word = value2;
> >
> > It can fold same keys with braces, also you can write array
> > data. For example,
> >
> > key {
> > word1 {
> > setting1 = data;
> > setting2;
> > }
> > word2.array = "val1", "val2";
> > }
>
> Why invent a custom file format? You could use YAML (or JSON):

Yeah, actually my early idea was using JSON, since it is widely used and
many good tools. However, I thought that is not human friendly format :(.
I would like to give an easy to read/write but structured interface.

>
> key:
> word1:
> setting1: data
> setting2: true
> word2:
> - val1
> - val2

(Ah, in above example "array" is just a part of key, and is not
a reserved word.)

> That would allow you to define a schema for defined options and can
> easily be manipulated with python (or any language with dictionaries
> and lists). That does imply adding a YAML parser to the kernel which
> I'm not sure is a great idea. There is a C parser lib, but working
> with YAML in C is not that great compared to python.

Yes, using plain YAML maybe requires user-space coverter to some
other format.

>
> Another option would be using the DTS format, but as a separate file.
> That's not unprecedented as u-boot FIT image is a DTB. Then the kernel
> already has the parser. And you could still have schema now.

Yeah, that is what I consider at first. I discussed it with Frank at
OSSJ, but he suggested to not use DTS, nor touch current parser in kernel.
So I finally convinced not using DTS.

> A new interface will take a lot of bootloader work to make it easy to
> use given the user has to manually load some file in the bootloader
> and know a good address to load it to.

Right, that is what I have to do next if this is accepted. As I shown, I
modified Qemu and Grub. (Since U-Boot is very flexible, it is easy to
load skc file and modify bootargs by manual.)
What I found was, since the bootloaders already supported loading DTB,
it would not be so hard to add loading another file :) (curiously, the
most complicated part was modifying kernel cmdline)

> Between that and rebuilding the
> kernel with the configuration, I'd pick rebuilding the kernel. Perhaps
> this version will highlight that the original proposal was not so bad.

Maybe for embedded, yes. For admins who use vendor kernel, no.

> Another thought, maybe you could process the configuration file that's
> in a readable/editable format into a flat representation that could
> simply be added to the kernel command line:

(BTW, it is easy to make a flat representation data as you can see
in /proc/sup_cmdline, which is added by [2/19])

>
> key.word1.setting1=data key.word1.setting2 key.word2=val1,val2
>
> That would then use an existing interface and probably simplify the
> kernel parsing.

Hmm, if it is just for passing extended arguments, that will be enough
(that was my first version of SKC, here
https://github.com/mhiramat/skc/tree/5f0429c244d1c9f8f84711bc33e1e6f90df62df8 )

But I found that was not enough flexible for my usage. For expressing
complex ftrace settings (e.g. nesting options, some options related to
other options etc.), I need tree-structured data, something like Devicetree.

Thank you,

--
Masami Hiramatsu <mhiramat@kernel.org>

\
 
 \ /
  Last update: 2019-08-27 04:38    [W:0.048 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site