lkml.org 
[lkml]   [2019]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH 3/5] bluetooth: hci_bcm: Give more time to come out of reset
Date
From: Ondrej Jirman <megous@megous.com>

Some supported devices need more time to come out of reset (eg.
BCM4345C5 in AP6256).

I don't have/found a datasheet, so the value was arrive at
experimentally with the Oprange Pi 3 board. Without increased delay,
I got intermittent failures during probe. This is a Bluetooth 5.0
device, so maybe that's why it takes longer to initialize than the
others.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
drivers/bluetooth/hci_bcm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 95c312ae94cf..7646636f2d18 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -260,7 +260,7 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
}

/* wait for device to power on and come out of reset */
- usleep_range(10000, 20000);
+ usleep_range(100000, 120000);

dev->res_enabled = powered;

--
2.23.0
\
 
 \ /
  Last update: 2019-08-23 12:32    [W:0.111 / U:3.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site