lkml.org 
[lkml]   [2019]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 3/3] mmc: host: sdhci-pci: add Genesys Logic GL975x support
On Tue, 13 Aug 2019 at 16:41, Michael K. Johnson <johnsonm@danlj.org> wrote:
>
> Add support for the GL9750 and GL9755 chipsets.
>
> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> Co-developed-by: Michael K Johnson <johnsonm@danlj.org>
> Signed-off-by: Michael K Johnson <johnsonm@danlj.org>

I am having a hard time to follow the different versions of the
patches in the series. Would you mind reposting the entire series and
then make sure all patches shares the same version.

Kind regards
Uffe

>
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 73578718f119..661445415090 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -13,7 +13,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
> obj-$(CONFIG_MMC_SDHCI) += sdhci.o
> obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
> sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o \
> - sdhci-pci-dwc-mshc.o
> + sdhci-pci-dwc-mshc.o sdhci-pci-gli.o
> obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
> obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
> obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
> diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> index 4154ee11b47d..e5835fbf73bc 100644
> --- a/drivers/mmc/host/sdhci-pci-core.c
> +++ b/drivers/mmc/host/sdhci-pci-core.c
> @@ -1682,6 +1682,8 @@ static const struct pci_device_id pci_ids[] = {
> SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
> SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
> SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
> + SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
> + SDHCI_PCI_DEVICE(GLI, 9755, gl9755),
> SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
> /* Generic SD host controller */
> {PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> new file mode 100644
> index 000000000000..28bdc2066580
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -0,0 +1,378 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Genesys Logic, Inc.
> + *
> + * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> + *
> + * Version: v0.9.0 (2019-08-08)
> + */
> +
> +#include <linux/pci.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/delay.h>
> +#include "sdhci.h"
> +#include "sdhci-pci.h"
> +
> +/* Genesys Logic extra registers */
> +#define SDHCI_GLI_9750_WT 0x800
> +#define SDHCI_GLI_9750_DRIVING 0x860
> +#define SDHCI_GLI_9750_PLL 0x864
> +#define SDHCI_GLI_9750_SW_CTRL 0x874
> +#define SDHCI_GLI_9750_MISC 0x878
> +
> +#define SDHCI_GLI_9750_TUNING_CONTROL 0x540
> +#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544
> +
> +#define GLI_MAX_TUNING_LOOP 40
> +
> +/* Genesys Logic chipset */
> +static void gli_set_9750(struct sdhci_host *host)
> +{
> + u32 wt_value = 0;
> + u32 driving_value = 0;
> + u32 pll_value = 0;
> + u32 sw_ctrl_value = 0;
> + u32 misc_value = 0;
> + u32 parameter_value = 0;
> + u32 control_value = 0;
> +
> + u16 ctrl2 = 0;
> +
> + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> + if ((wt_value & 0x1) == 0) {
> + wt_value |= 0x1;
> + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> + }
> +
> + driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
> + pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
> + sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
> + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> + parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
> + control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
> +
> + driving_value &= ~(0x0C000FFF);
> + driving_value |= 0x0C000FFF;
> + sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
> +
> + sw_ctrl_value |= 0xc0;
> + sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
> +
> + // reset the tuning flow after reinit and before starting tuning
> + pll_value |= 0x800000; // bit23-1
> + pll_value &= ~(0x00700000); // bit22:20-0
> +
> + misc_value &= ~(0x8); // bit3-0
> + misc_value &= ~(0x4); // bit2-0
> +
> + misc_value &= ~(0x70); // bit6:4-0
> + misc_value |= 0x50; // bit6:4-5
> +
> + parameter_value &= ~(0x7); // bit2:0-0
> + parameter_value |= 0x1; // bit2:0-1
> +
> + control_value &= ~(0x190000); // bit20:19-0, bit16-0
> + control_value |= 0x110000; // bit20:19-b10, bit16-1
> +
> + sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
> + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> +
> + // disable tuned clk
> + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
> + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
> +
> + // 540 enable tuning parameters control
> + control_value |= 0x10;
> + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
> +
> + // write 544 tuning parameters
> + sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
> +
> + // 540 disable tuning parameters control
> + control_value &= ~0x10;
> + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
> +
> + // clear tuned clk
> + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
> + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
> +
> + udelay(1);
> + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> + wt_value &= ~0x1;
> + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> +}
> +
> +static void sdhci_gli_do_reset(struct sdhci_host *host, u8 mask)
> +{
> + host->ops->reset(host, mask);
> +
> + if (mask & SDHCI_RESET_ALL) {
> + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
> + if (host->ops->enable_dma)
> + host->ops->enable_dma(host);
> + }
> +
> + /* Resetting the controller clears many */
> + host->preset_enabled = false;
> + }
> +}
> +
> +static void sdhci_gli_abort_tuning(struct sdhci_host *host, u32 opcode)
> +{
> + sdhci_reset_tuning(host);
> +
> + sdhci_gli_do_reset(host, SDHCI_RESET_CMD);
> + sdhci_gli_do_reset(host, SDHCI_RESET_DATA);
> +
> + sdhci_end_tuning(host);
> +
> + mmc_abort_tuning(host->mmc, opcode);
> +}
> +
> +static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
> +{
> + u32 wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> + u32 misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> +
> + if ((wt_value & 0x1) == 0) {
> + wt_value |= 0x1;
> + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> + }
> +
> + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> + if (b) {
> + misc_value |= 0x8;
> + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> + } else {
> + misc_value &= ~0x8;
> + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> + }
> +
> + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> + wt_value &= ~0x1;
> + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> +}
> +
> +static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
> +{
> + int i;
> + int rx_inv = 0;
> +
> + for (rx_inv = 0; rx_inv < 2; rx_inv++) {
> + if (rx_inv & 0x1)
> + gli_set_9750_rx_inv(host, true);
> + else
> + gli_set_9750_rx_inv(host, false);
> +
> + sdhci_start_tuning(host);
> +
> + for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
> + u16 ctrl;
> +
> + sdhci_send_tuning(host, opcode);
> +
> + if (!host->tuning_done) {
> + if (rx_inv == 1) {
> + pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
> + mmc_hostname(host->mmc));
> + sdhci_gli_abort_tuning(host, opcode);
> + return -ETIMEDOUT;
> + }
> + pr_info("%s: Tuning timeout, try next tuning\n",
> + mmc_hostname(host->mmc));
> + sdhci_gli_abort_tuning(host, opcode);
> + break;
> + }
> +
> + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
> + if (ctrl & SDHCI_CTRL_TUNED_CLK)
> + return 0; /* Success! */
> + break;
> + }
> + }
> + }
> +
> + pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
> + mmc_hostname(host->mmc));
> + sdhci_reset_tuning(host);
> + return -EAGAIN;
> +}
> +
> +static int gl9750_execute_tuning(struct mmc_host *mmc, u32 opcode)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + int err = 0;
> + unsigned int tuning_count = 0;
> + bool hs400_tuning;
> +
> + hs400_tuning = host->flags & SDHCI_HS400_TUNING;
> +
> + if (host->tuning_mode == SDHCI_TUNING_MODE_1)
> + tuning_count = host->tuning_count;
> +
> + /*
> + * The Host Controller needs tuning in case of SDR104 and DDR50
> + * mode, and for SDR50 mode when Use Tuning for SDR50 is set in
> + * the Capabilities register.
> + * If the Host Controller supports the HS200 mode then the
> + * tuning function has to be executed.
> + */
> + switch (host->timing) {
> + /* HS400 tuning is done in HS200 mode */
> + case MMC_TIMING_MMC_HS400:
> + err = -EINVAL;
> + goto out;
> +
> + case MMC_TIMING_MMC_HS200:
> + /*
> + * Periodic re-tuning for HS400 is not expected to be needed, so
> + * disable it here.
> + */
> + if (hs400_tuning)
> + tuning_count = 0;
> + break;
> +
> + case MMC_TIMING_UHS_SDR104:
> + case MMC_TIMING_UHS_DDR50:
> + case MMC_TIMING_UHS_SDR50:
> + break;
> +
> + default:
> + goto out;
> + }
> +
> + if (host->ops->platform_execute_tuning) {
> + err = host->ops->platform_execute_tuning(host, opcode);
> + goto out;
> + }
> +
> + host->mmc->retune_period = tuning_count;
> +
> + if (host->tuning_delay < 0)
> + host->tuning_delay = opcode == MMC_SEND_TUNING_BLOCK;
> +
> + gli_set_9750(host);
> + host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
> +
> + sdhci_end_tuning(host);
> +out:
> + host->flags &= ~SDHCI_HS400_TUNING;
> +
> + return err;
> +}
> +
> +static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
> +{
> + struct sdhci_host *host = slot->host;
> + struct mmc_host_ops *ops = &host->mmc_host_ops;
> +
> + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> + sdhci_enable_v4_mode(host);
> +
> + ops->execute_tuning = gl9750_execute_tuning;
> +
> + return 0;
> +}
> +
> +static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
> +{
> + struct sdhci_host *host = slot->host;
> +
> + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> + sdhci_enable_v4_mode(host);
> +
> + return 0;
> +}
> +
> +static void sdhci_gli_voltage_switch(struct sdhci_host *host)
> +{
> + usleep_range(5000, 5500);
> +}
> +
> +static void sdhci_gli_pci_hw_reset(struct sdhci_host *host)
> +{
> + struct sdhci_pci_slot *slot = sdhci_priv(host);
> +
> + if (slot->hw_reset)
> + slot->hw_reset(host);
> +}
> +
> +static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
> +{
> + ktime_t timeout;
> +
> + sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
> +
> + if (mask & SDHCI_RESET_ALL)
> + host->clock = 0;
> +
> + /* Wait max 100 ms */
> + timeout = ktime_add_ms(ktime_get(), 100);
> +
> + /* hw clears the bit when it's done */
> + while (1) {
> + bool timedout = ktime_after(ktime_get(), timeout);
> +
> + if (!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask))
> + break;
> + if (timedout) {
> + pr_err("%s: Reset 0x%x never completed.\n",
> + mmc_hostname(host->mmc), (int)mask);
> + sdhci_dumpregs(host);
> + return;
> + }
> + udelay(10);
> + }
> + gli_set_9750(host);
> +}
> +
> +static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
> +{
> + u32 value;
> +
> + value = readl(host->ioaddr + reg);
> + if (unlikely(reg == SDHCI_MAX_CURRENT)) {
> + if (!(value & 0xff))
> + value |= 0xc8;
> + }
> + return value;
> +}
> +
> +static const struct sdhci_ops sdhci_gl9755_ops = {
> + .set_clock = sdhci_set_clock,
> + .enable_dma = sdhci_pci_enable_dma,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = sdhci_reset,
> + .set_uhs_signaling = sdhci_set_uhs_signaling,
> + .hw_reset = sdhci_gli_pci_hw_reset,
> + .voltage_switch = sdhci_gli_voltage_switch,
> +};
> +
> +const struct sdhci_pci_fixes sdhci_gl9755 = {
> + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
> + .probe_slot = gli_probe_slot_gl9755,
> + .ops = &sdhci_gl9755_ops,
> +};
> +
> +static const struct sdhci_ops sdhci_gl9750_ops = {
> + .read_l = sdhci_gl9750_readl,
> + .set_clock = sdhci_set_clock,
> + .enable_dma = sdhci_pci_enable_dma,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = sdhci_gl9750_reset,
> + .set_uhs_signaling = sdhci_set_uhs_signaling,
> + .hw_reset = sdhci_gli_pci_hw_reset,
> + .voltage_switch = sdhci_gli_voltage_switch,
> +};
> +
> +const struct sdhci_pci_fixes sdhci_gl9750 = {
> + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
> + .probe_slot = gli_probe_slot_gl9750,
> + .ops = &sdhci_gl9750_ops,
> +};
> +
> diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
> index e5dc6e44c7a4..738ba5afcc20 100644
> --- a/drivers/mmc/host/sdhci-pci.h
> +++ b/drivers/mmc/host/sdhci-pci.h
> @@ -65,6 +65,9 @@
>
> #define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202
>
> +#define PCI_DEVICE_ID_GLI_9755 0x9755
> +#define PCI_DEVICE_ID_GLI_9750 0x9750
> +
> /*
> * PCI device class and mask
> */
> @@ -185,5 +188,7 @@ int sdhci_pci_enable_dma(struct sdhci_host *host);
> extern const struct sdhci_pci_fixes sdhci_arasan;
> extern const struct sdhci_pci_fixes sdhci_snps;
> extern const struct sdhci_pci_fixes sdhci_o2;
> +extern const struct sdhci_pci_fixes sdhci_gl9750;
> +extern const struct sdhci_pci_fixes sdhci_gl9755;
>
> #endif /* __SDHCI_PCI_H */

\
 
 \ /
  Last update: 2019-08-21 12:16    [W:0.056 / U:0.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site