lkml.org 
[lkml]   [2019]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 07/15] dt: thermal: tsens: Document interrupt support in tsens driver
On Fri, Jul 26, 2019 at 03:48:42AM +0530, Amit Kucheria wrote:
> Define two new required properties to define interrupts and
> interrupt-names for tsens.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> Documentation/devicetree/bindings/thermal/qcom-tsens.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> index 673cc1831ee9..3d3dd5dc6d36 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> @@ -22,6 +22,8 @@ Required properties:
>
> - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> - #qcom,sensors: Number of sensors in tsens block
> +- interrupts: Interrupts generated from Always-On subsystem (AOSS)
> +- interrupt-names: The name of the interrupt e.g. "tsens0", "tsens1"

How many interrupts? A name with just indices isn't too useful.

> - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
> nvmem cells
>
> @@ -40,6 +42,9 @@ tsens0: thermal-sensor@c263000 {
> reg = <0xc263000 0x1ff>, /* TM */
> <0xc222000 0x1ff>; /* SROT */
> #qcom,sensors = <13>;
> + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "tsens0";
> +
> #thermal-sensor-cells = <1>;
> };
>
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-08-16 23:38    [W:0.196 / U:1.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site