lkml.org 
[lkml]   [2019]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [LKP] [drm/mgag200] 90f479ae51: vm-scalability.median -18.8% regression
Hi Thomas,

On Tue, Aug 13, 2019 at 05:36:16PM +0800, Feng Tang wrote:
> Hi Thomas,
>
> On Mon, Aug 12, 2019 at 03:25:45PM +0800, Feng Tang wrote:
> > Hi Thomas,
> >
> > On Fri, Aug 09, 2019 at 04:12:29PM +0800, Rong Chen wrote:
> > > Hi,
> > >
> > > >>Actually we run the benchmark as a background process, do we need to
> > > >>disable the cursor and test again?
> > > >There's a worker thread that updates the display from the shadow buffer.
> > > >The blinking cursor periodically triggers the worker thread, but the
> > > >actual update is just the size of one character.
> > > >
> > > >The point of the test without output is to see if the regression comes
> > > >from the buffer update (i.e., the memcpy from shadow buffer to VRAM), or
> > > >from the worker thread. If the regression goes away after disabling the
> > > >blinking cursor, then the worker thread is the problem. If it already
> > > >goes away if there's simply no output from the test, the screen update
> > > >is the problem. On my machine I have to disable the blinking cursor, so
> > > >I think the worker causes the performance drop.
> > >
> > > We disabled redirecting stdout/stderr to /dev/kmsg,  and the regression is
> > > gone.
> > >
> > > commit:
> > >   f1f8555dfb9 drm/bochs: Use shadow buffer for bochs framebuffer console
> > >   90f479ae51a drm/mgag200: Replace struct mga_fbdev with generic framebuffer
> > > emulation
> > >
> > > f1f8555dfb9a70a2  90f479ae51afa45efab97afdde testcase/testparams/testbox
> > > ----------------  -------------------------- ---------------------------
> > >          %stddev      change         %stddev
> > >              \          |                \
> > >      43785                       44481
> > > vm-scalability/300s-8T-anon-cow-seq-hugetlb/lkp-knm01
> > >      43785                       44481        GEO-MEAN vm-scalability.median
> >
> > Till now, from Rong's tests:
> > 1. Disabling cursor blinking doesn't cure the regression.
> > 2. Disabling printint test results to console can workaround the
> > regression.
> >
> > Also if we set the perfer_shadown to 0, the regression is also
> > gone.
>
> We also did some further break down for the time consumed by the
> new code.
>
> The drm_fb_helper_dirty_work() calls sequentially
> 1. drm_client_buffer_vmap (290 us)
> 2. drm_fb_helper_dirty_blit_real (19240 us)
> 3. helper->fb->funcs->dirty() ---> NULL for mgag200 driver
> 4. drm_client_buffer_vunmap (215 us)
>
> The average run time is listed after the function names.
>
> From it, we can see drm_fb_helper_dirty_blit_real() takes too long
> time (about 20ms for each run). I guess this is the root cause
> of this regression, as the original code doesn't use this dirty worker.
>
> As said in last email, setting the prefer_shadow to 0 can avoid
> the regrssion. Could it be an option?

Any comments on this? thanks

- Feng

>
> Thanks,
> Feng
>
> >
> > --- a/drivers/gpu/drm/mgag200/mgag200_main.c
> > +++ b/drivers/gpu/drm/mgag200/mgag200_main.c
> > @@ -167,7 +167,7 @@ int mgag200_driver_load(struct drm_device *dev, unsigned long flags)
> > dev->mode_config.preferred_depth = 16;
> > else
> > dev->mode_config.preferred_depth = 32;
> > - dev->mode_config.prefer_shadow = 1;
> > + dev->mode_config.prefer_shadow = 0;
> >
> > And from the perf data, one obvious difference is good case don't
> > call drm_fb_helper_dirty_work(), while bad case calls.
> >
> > Thanks,
> > Feng
> >
> > > Best Regards,
> > > Rong Chen
> _______________________________________________
> LKP mailing list
> LKP@lists.01.org
> https://lists.01.org/mailman/listinfo/lkp

\
 
 \ /
  Last update: 2019-08-16 09:00    [W:0.102 / U:3.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site