lkml.org 
[lkml]   [2019]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 00/13] net: phy: adin: add support for Analog Devices PHYs
From
From: Alexandru Ardelean <alexandru.ardelean@analog.com>
Date: Fri, 16 Aug 2019 16:09:58 +0300

> This changeset adds support for Analog Devices Industrial Ethernet PHYs.
> Particularly the PHYs this driver adds support for:
> * ADIN1200 - Robust, Industrial, Low Power 10/100 Ethernet PHY
> * ADIN1300 - Robust, Industrial, Low Latency 10/100/1000 Gigabit
> Ethernet PHY
>
> The 2 chips are register compatible with one another. The main
> difference being that ADIN1200 doesn't operate in gigabit mode.
>
> The chips can be operated by the Generic PHY driver as well via the
> standard IEEE PHY registers (0x0000 - 0x000F) which are supported by the
> kernel as well. This assumes that configuration of the PHY has been done
> completely in HW, according to spec, i.e. no extra SW configuration
> required.
>
> This changeset also implements the ability to configure the chips via SW
> registers.
>
> Datasheets:
> https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1300.pdf
> https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1200.pdf
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

Series applied, thank you.

\
 
 \ /
  Last update: 2019-08-16 20:59    [W:0.076 / U:2.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site