lkml.org 
[lkml]   [2019]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 03/63] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary
On Fri, Aug 16, 2019 at 05:28:52PM +0900, Jiada Wang wrote:
> From: Nick Dyer <nick.dyer@itdev.co.uk>
>
> The workaround of reading all messages until an invalid is received is a
> way of forcing the CHG line high, which means that when using
> edge-triggered interrupts the interrupt can be acquired.
>
> With level-triggered interrupts the workaround is unnecessary.
>
> Also, most recent maXTouch chips have a feature called RETRIGEN which, when
> enabled, reasserts the interrupt line every cycle if there are messages
> waiting. This also makes the workaround unnecessary.
>
> Note: the RETRIGEN feature is only in some firmware versions/chips, it's
> not valid simply to enable the bit.

Instead of trying to work around of misconfiguration for IRQ/firmware,
can we simply error out of probe if we see a level interrupt with
!RETRIGEN firmware?

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2019-08-16 19:17    [W:0.115 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site