lkml.org 
[lkml]   [2019]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] docs: mtd: Update spi nor reference driver
Date
On 06/08/2019 17:40, Schrempf Frieder wrote:
> Cc: +MTD/SPI-NOR/SPI maintainers
>
> Hi John,
>
> On 06.08.19 18:35, John Garry wrote:
>> On 06/08/2019 17:06, John Garry wrote:
>>> The reference driver no longer exists since commit 50f1242c6742 ("mtd:
>>> fsl-quadspi: Remove the driver as it was replaced by spi-fsl-qspi.c").
>>>
>>> Update reference to spi-fsl-qspi.c driver.
>>>
>>> Signed-off-by: John Garry <john.garry@huawei.com>
>>>
>>> diff --git a/Documentation/driver-api/mtd/spi-nor.rst
>>> b/Documentation/driver-api/mtd/spi-nor.rst
>>> index f5333e3bf486..1f0437676762 100644
>>> --- a/Documentation/driver-api/mtd/spi-nor.rst
>>> +++ b/Documentation/driver-api/mtd/spi-nor.rst
>>
>> In fact this document has many references to Freescale QuadSPI - could
>> someone kindly review this complete document for up-to-date accuracy?
>
> The new driver spi-fsl-qspi.c is not a SPI NOR controller driver
> anymore. It is now a SPI controller driver that uses the SPI MEM API, so
> referencing it here is obsolete.
>
> Actually it seems like the whole file is obsolete and needs to be
> removed or replaced by proper documentation of the SPI MEM API.

Hi,

Could someone kindly advise on the following:

I am looking at ACPI support only for an mtd spi nor driver we're
targeting for mainline support.

So for the host, I could use a proprietary HID in the DSDT for matching
in the kernel driver.

About the child spi flash devices, is the recommendation to just use
PRP0001 HID and "jedec,spi-nor" compatible?

thanks,
John


>
> @Maintainers:
> Maybe the docs under Documentation/driver-api/mtd should be officially
> maintained by the MTD subsystem (and added to MAINTAINERS). And if there
> will be some driver API docs for SPI MEM it should probably live in
> Documentation/driver-api/spi instead of Documentation/driver-api/mtd, as
> spi-mem.c itself is in drivers/spi.
>
> Regards,
> Frieder
>
>>
>> Thanks,
>> John
>>
>>> @@ -59,7 +59,7 @@ Part III - How can drivers use the framework?
>>>
>>> The main API is spi_nor_scan(). Before you call the hook, a driver
>>> should
>>> initialize the necessary fields for spi_nor{}. Please see
>>> -drivers/mtd/spi-nor/spi-nor.c for detail. Please also refer to
>>> fsl-quadspi.c
>>> +drivers/mtd/spi-nor/spi-nor.c for detail. Please also refer to
>>> spi-fsl-qspi.c
>>> when you want to write a new driver for a SPI NOR controller.
>>> Another API is spi_nor_restore(), this is used to restore the status
>>> of SPI
>>> flash chip such as addressing mode. Call it whenever detach the
>>> driver from
>>>
>>
>>
>>
>> ______________________________________________________
>> Linux MTD discussion mailing list
>> http://lists.infradead.org/mailman/listinfo/linux-mtd/


\
 
 \ /
  Last update: 2019-08-16 12:21    [W:0.058 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site