lkml.org 
[lkml]   [2019]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V6 4/4] arm64: dts: imx8mm: Enable cpu-idle driver
From
Date
On 16/08/2019 02:38, Anson Huang wrote:
> Enable i.MX8MM cpu-idle using generic ARM cpu-idle driver, 2 states
> are supported, details as below:
>
> root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state0/name
> WFI
> root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state0/usage
> 3973
> root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state1/name
> cpu-pd-wait
> root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state1/usage
> 6647
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Hi Anson,

I've applied the patches 1-3 but this one does not apply.

You can either respin it against tip/timers/core and take it through
Shawn's tree. If the later, you can add my Acked-by.

-- Daniel

--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2019-08-16 12:00    [W:0.041 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site