lkml.org 
[lkml]   [2019]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/2] hwmon: pmbus: Add Inspur Power System power supply driver
From
Date
On 8/11/19 7:53 PM, John Wang wrote:
> Add the driver to monitor Inspur Power System power supplies
> with hwmon over pmbus.
>
> This driver adds sysfs attributes for additional power supply data,
> including vendor, model, part_number, serial number,
> firmware revision, hardware revision, and psu mode(active/standby).
>
> Signed-off-by: John Wang <wangzqbj@inspur.com>
> ---
> v3:
> - Sort kconfig/makefile entries alphabetically
> - Remove unnecessary initialization
> - Use ATTRIBUTE_GROUPS instead of expanding directly
> - Use memscan to avoid reimplementation
> v2:
> - Fix typos in commit message
> - Invert Christmas tree
> - Configure device with sysfs attrs, not debugfs entries
> - Fix errno in fw_version_read, ENODATA to EPROTO
> - Change the print format of fw-version
> - Use sysfs_streq instead of strcmp("xxx" "\n", "xxx")
> - Document sysfs attributes
> ---
> Documentation/hwmon/inspur-ipsps1.rst | 79 +++++++++
> drivers/hwmon/pmbus/Kconfig | 9 +
> drivers/hwmon/pmbus/Makefile | 41 ++---
> drivers/hwmon/pmbus/inspur-ipsps.c | 226 ++++++++++++++++++++++++++
> 4 files changed, 335 insertions(+), 20 deletions(-)
> create mode 100644 Documentation/hwmon/inspur-ipsps1.rst
> create mode 100644 drivers/hwmon/pmbus/inspur-ipsps.c
>
> diff --git a/Documentation/hwmon/inspur-ipsps1.rst b/Documentation/hwmon/inspur-ipsps1.rst
> new file mode 100644
> index 000000000000..aa19f0ccc8b0
> --- /dev/null
> +++ b/Documentation/hwmon/inspur-ipsps1.rst
> @@ -0,0 +1,79 @@
> +Kernel driver inspur-ipsps1
> +=======================
> +
> +Supported chips:
> +
> + * Inspur Power System power supply unit
> +
> +Author: John Wang <wangzqbj@inspur.com>
> +
> +Description
> +-----------
> +
> +This driver supports Inspur Power System power supplies. This driver
> +is a client to the core PMBus driver.
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to instantiate the
> +devices explicitly. Please see Documentation/i2c/instantiating-devices for
> +details.
> +
> +Sysfs entries
> +-------------
> +
> +The following attributes are supported:
> +
> +======================= ======================================================
> +curr1_input Measured input current
> +curr1_label "iin"
> +curr1_max Maximum current
> +curr1_max_alarm Current high alarm
> +curr2_input Measured output current in mA.
> +curr2_label "iout1"
> +curr2_crit Critical maximum current
> +curr2_crit_alarm Current critical high alarm
> +curr2_max Maximum current
> +curr2_max_alarm Current high alarm
> +
> +fan1_alarm Fan 1 warning.
> +fan1_fault Fan 1 fault.
> +fan1_input Fan 1 speed in RPM.
> +
> +in1_alarm Input voltage under-voltage alarm.
> +in1_input Measured input voltage in mV.
> +in1_label "vin"
> +in2_input Measured output voltage in mV.
> +in2_label "vout1"
> +in2_lcrit Critical minimum output voltage
> +in2_lcrit_alarm Output voltage critical low alarm
> +in2_max Maximum output voltage
> +in2_max_alarm Output voltage high alarm
> +in2_min Minimum output voltage
> +in2_min_alarm Output voltage low alarm
> +
> +power1_alarm Input fault or alarm.
> +power1_input Measured input power in uW.
> +power1_label "pin"
> +power1_max Input power limit
> +power2_max_alarm Output power high alarm
> +power2_max Output power limit
> +power2_input Measured output power in uW.
> +power2_label "pout"
> +
> +temp[1-3]_input Measured temperature
> +temp[1-2]_max Maximum temperature
> +temp[1-3]_max_alarm Temperature high alarm
> +
> +vendor Manufacturer name
> +model Product model
> +part_number Product part number
> +serial_number Product serial number
> +fw_version Firmware version
> +hw_version Hardware version
> +mode Work mode. Can be set to active or
> + standby, when set to standby, PSU will
> + automatically switch between standby
> + and redundancy mode.
> +======================= ======================================================
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 30751eb9550a..2370fce6e816 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -46,6 +46,15 @@ config SENSORS_IBM_CFFPS
> This driver can also be built as a module. If so, the module will
> be called ibm-cffps.
>
> +config SENSORS_INSPUR_IPSPS
> + tristate "INSPUR Power System Power Supply"
> + help
> + If you say yes here you get hardware monitoring support for the INSPUR
> + Power System power supply.
> +
> + This driver can also be built as a module. If so, the module will
> + be called inspur-ipsps.
> +
> config SENSORS_IR35221
> tristate "Infineon IR35221"
> help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 2219b9300316..c4f82f65f2ad 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -3,23 +3,24 @@
> # Makefile for PMBus chip drivers.
> #
>
> -obj-$(CONFIG_PMBUS) += pmbus_core.o
> -obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
> -obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
> -obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
> -obj-$(CONFIG_SENSORS_IR35221) += ir35221.o
> -obj-$(CONFIG_SENSORS_IR38064) += ir38064.o
> -obj-$(CONFIG_SENSORS_ISL68137) += isl68137.o
> -obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
> -obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
> -obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o
> -obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
> -obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
> -obj-$(CONFIG_SENSORS_MAX31785) += max31785.o
> -obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
> -obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
> -obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
> -obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
> -obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
> -obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
> -obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
> +obj-$(CONFIG_PMBUS) += pmbus_core.o
> +obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
> +obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
> +obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
> +obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
> +obj-$(CONFIG_SENSORS_IR35221) += ir35221.o
> +obj-$(CONFIG_SENSORS_IR38064) += ir38064.o
> +obj-$(CONFIG_SENSORS_ISL68137) += isl68137.o
> +obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
> +obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
> +obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o
> +obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
> +obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
> +obj-$(CONFIG_SENSORS_MAX31785) += max31785.o
> +obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
> +obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
> +obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
> +obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
> +obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
> +obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
> +obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o

Are you serious ? I am not going to accept this.

Guenter

> diff --git a/drivers/hwmon/pmbus/inspur-ipsps.c b/drivers/hwmon/pmbus/inspur-ipsps.c
> new file mode 100644
> index 000000000000..fa981b881a60
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/inspur-ipsps.c
> @@ -0,0 +1,226 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2019 Inspur Corp.
> + */
> +
> +#include <linux/debugfs.h>
> +#include <linux/device.h>
> +#include <linux/fs.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pmbus.h>
> +#include <linux/hwmon-sysfs.h>
> +
> +#include "pmbus.h"
> +
> +#define IPSPS_REG_VENDOR_ID 0x99
> +#define IPSPS_REG_MODEL 0x9A
> +#define IPSPS_REG_FW_VERSION 0x9B
> +#define IPSPS_REG_PN 0x9C
> +#define IPSPS_REG_SN 0x9E
> +#define IPSPS_REG_HW_VERSION 0xB0
> +#define IPSPS_REG_MODE 0xFC
> +
> +#define MODE_ACTIVE 0x55
> +#define MODE_STANDBY 0x0E
> +#define MODE_REDUNDANCY 0x00
> +
> +#define MODE_ACTIVE_STRING "active"
> +#define MODE_STANDBY_STRING "standby"
> +#define MODE_REDUNDANCY_STRING "redundancy"
> +
> +enum ipsps_index {
> + vendor,
> + model,
> + fw_version,
> + part_number,
> + serial_number,
> + hw_version,
> + mode,
> + num_regs,
> +};
> +
> +static const u8 ipsps_regs[num_regs] = {
> + [vendor] = IPSPS_REG_VENDOR_ID,
> + [model] = IPSPS_REG_MODEL,
> + [fw_version] = IPSPS_REG_FW_VERSION,
> + [part_number] = IPSPS_REG_PN,
> + [serial_number] = IPSPS_REG_SN,
> + [hw_version] = IPSPS_REG_HW_VERSION,
> + [mode] = IPSPS_REG_MODE,
> +};
> +
> +static ssize_t ipsps_string_show(struct device *dev,
> + struct device_attribute *devattr,
> + char *buf)
> +{
> + u8 reg;
> + int rc;
> + char *p;
> + char data[I2C_SMBUS_BLOCK_MAX + 1];
> + struct i2c_client *client = to_i2c_client(dev->parent);
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> +
> + reg = ipsps_regs[attr->index];
> + rc = i2c_smbus_read_block_data(client, reg, data);
> + if (rc < 0)
> + return rc;
> +
> + /* filled with printable characters, ending with # */
> + p = memscan(data, '#', rc);
> + *p = '\0';
> +
> + return snprintf(buf, PAGE_SIZE, "%s\n", data);
> +}
> +
> +static ssize_t ipsps_fw_version_show(struct device *dev,
> + struct device_attribute *devattr,
> + char *buf)
> +{
> + u8 reg;
> + int rc;
> + u8 data[I2C_SMBUS_BLOCK_MAX] = { 0 };
> + struct i2c_client *client = to_i2c_client(dev->parent);
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> +
> + reg = ipsps_regs[attr->index];
> + rc = i2c_smbus_read_block_data(client, reg, data);
> + if (rc < 0)
> + return rc;
> +
> + if (rc != 6)
> + return -EPROTO;
> +
> + return snprintf(buf, PAGE_SIZE, "%u.%02u%u-%u.%02u\n",
> + data[1], data[2]/* < 100 */, data[3]/*< 10*/,
> + data[4], data[5]/* < 100 */);
> +}
> +
> +static ssize_t ipsps_mode_show(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + u8 reg;
> + int rc;
> + struct i2c_client *client = to_i2c_client(dev->parent);
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> +
> + reg = ipsps_regs[attr->index];
> + rc = i2c_smbus_read_byte_data(client, reg);
> + if (rc < 0)
> + return rc;
> +
> + switch (rc) {
> + case MODE_ACTIVE:
> + return snprintf(buf, PAGE_SIZE, "[%s] %s %s\n",
> + MODE_ACTIVE_STRING,
> + MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
> + case MODE_STANDBY:
> + return snprintf(buf, PAGE_SIZE, "%s [%s] %s\n",
> + MODE_ACTIVE_STRING,
> + MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
> + case MODE_REDUNDANCY:
> + return snprintf(buf, PAGE_SIZE, "%s %s [%s]\n",
> + MODE_ACTIVE_STRING,
> + MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
> + default:
> + return snprintf(buf, PAGE_SIZE, "unspecified\n");
> + }
> +}
> +
> +static ssize_t ipsps_mode_store(struct device *dev,
> + struct device_attribute *devattr,
> + const char *buf, size_t count)
> +{
> + u8 reg;
> + int rc;
> + struct i2c_client *client = to_i2c_client(dev->parent);
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> +
> + reg = ipsps_regs[attr->index];
> + if (sysfs_streq(MODE_STANDBY_STRING, buf)) {
> + rc = i2c_smbus_write_byte_data(client, reg,
> + MODE_STANDBY);
> + if (rc < 0)
> + return rc;
> + return count;
> + } else if (sysfs_streq(MODE_ACTIVE_STRING, buf)) {
> + rc = i2c_smbus_write_byte_data(client, reg,
> + MODE_ACTIVE);
> + if (rc < 0)
> + return rc;
> + return count;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static SENSOR_DEVICE_ATTR_RO(vendor, ipsps_string, vendor);
> +static SENSOR_DEVICE_ATTR_RO(model, ipsps_string, model);
> +static SENSOR_DEVICE_ATTR_RO(part_number, ipsps_string, part_number);
> +static SENSOR_DEVICE_ATTR_RO(serial_number, ipsps_string, serial_number);
> +static SENSOR_DEVICE_ATTR_RO(hw_version, ipsps_string, hw_version);
> +static SENSOR_DEVICE_ATTR_RO(fw_version, ipsps_fw_version, fw_version);
> +static SENSOR_DEVICE_ATTR_RW(mode, ipsps_mode, mode);
> +
> +static struct attribute *ipsps_attrs[] = {
> + &sensor_dev_attr_vendor.dev_attr.attr,
> + &sensor_dev_attr_model.dev_attr.attr,
> + &sensor_dev_attr_part_number.dev_attr.attr,
> + &sensor_dev_attr_serial_number.dev_attr.attr,
> + &sensor_dev_attr_hw_version.dev_attr.attr,
> + &sensor_dev_attr_fw_version.dev_attr.attr,
> + &sensor_dev_attr_mode.dev_attr.attr,
> + NULL,
> +};
> +
> +ATTRIBUTE_GROUPS(ipsps);
> +
> +static struct pmbus_driver_info ipsps_info = {
> + .pages = 1,
> + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
> + PMBUS_HAVE_IIN | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN |
> + PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
> + PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
> + PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
> + .groups = ipsps_groups,
> +};
> +
> +static struct pmbus_platform_data ipsps_pdata = {
> + .flags = PMBUS_SKIP_STATUS_CHECK,
> +};
> +
> +static int ipsps_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + client->dev.platform_data = &ipsps_pdata;
> + return pmbus_do_probe(client, id, &ipsps_info);
> +}
> +
> +static const struct i2c_device_id ipsps_id[] = {
> + { "inspur_ipsps1", 0 },
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, ipsps_id);
> +
> +static const struct of_device_id ipsps_of_match[] = {
> + { .compatible = "inspur,ipsps1" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, ipsps_of_match);
> +
> +static struct i2c_driver ipsps_driver = {
> + .driver = {
> + .name = "inspur-ipsps",
> + .of_match_table = ipsps_of_match,
> + },
> + .probe = ipsps_probe,
> + .remove = pmbus_do_remove,
> + .id_table = ipsps_id,
> +};
> +
> +module_i2c_driver(ipsps_driver);
> +
> +MODULE_AUTHOR("John Wang");
> +MODULE_DESCRIPTION("PMBus driver for Inspur Power System power supplies");
> +MODULE_LICENSE("GPL");
>

\
 
 \ /
  Last update: 2019-08-12 06:22    [W:0.077 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site