lkml.org 
[lkml]   [2019]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] rpmsg: add a description field
Date
Hi Suman,

See my remarks below

BR

Fabien


On 09/08/2019 11:40 PM, Suman Anna wrote:
> From: Ohad Ben-Cohen <ohad@wizery.com>
>
> Add a new description field to the rpmsg bus infrastructure
> that can be passed onto the rpmsg client drivers for additional
> information. The current rpmsg bus client drivers need to have
> a fixed id_table for proper matching, this new field can allow
> flexibility for the client drivers (eg: like creating unique
> cdevs).
>
> The description field is published through an enhanced name
> service announcement message structure. The name service
> message processing logic is updated to maintain backward
> compatibility with the previous message structure.
>
> Based on an initial patch from Ohad Ben-Cohen.
>
> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
> [s-anna@ti.com: forward port, add sysfs documentation, fixup qcom drivers]
> Signed-off-by: Suman Anna <s-anna@ti.com>
> [t-kristo@ti.com: reworked to support both rpmsg with/without the desc field]
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
> Documentation/ABI/testing/sysfs-bus-rpmsg | 29 +++++++++++++++
> drivers/rpmsg/qcom_glink_native.c | 1 +
> drivers/rpmsg/qcom_smd.c | 1 +


Should not you extend qcom_glink_create_ept() and qcom_smd_create_ept()
so they compare both 'name' AND 'desc' (just like this is proposed in
rpmsg_device_match()) ?


> drivers/rpmsg/rpmsg_char.c | 1 +
> drivers/rpmsg/rpmsg_core.c | 6 ++++
> drivers/rpmsg/virtio_rpmsg_bus.c | 44 +++++++++++++++++++----
> drivers/soc/qcom/wcnss_ctrl.c | 1 +
> include/linux/rpmsg.h | 4 +++
> 8 files changed, 80 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-rpmsg b/Documentation/ABI/testing/sysfs-bus-rpmsg
> index 990fcc420935..7f1b09ecc64d 100644
> --- a/Documentation/ABI/testing/sysfs-bus-rpmsg
> +++ b/Documentation/ABI/testing/sysfs-bus-rpmsg
> @@ -93,3 +93,32 @@ Description:
> This sysfs entry allows the rpmsg driver for a rpmsg device
> to be specified which will override standard OF, ID table
> and name matching.
> +
> +What: /sys/bus/rpmsg/devices/.../desc
> +Date: August 2019
> +KernelVersion: 5.4
> +Contact: Bjorn Andersson <bjorn.andersson@linaro.org>
> +Description:
> + Every rpmsg device is a communication channel with a remote
> + processor. Channels are identified by a textual name (see
> + /sys/bus/rpmsg/devices/.../name above) and have a local
> + ("source") rpmsg address, and remote ("destination") rpmsg
> + address.
> +
> + A channel is first created when an entity, whether local
> + or remote, starts listening on it for messages (and is thus
> + called an rpmsg server). When that happens, a "name service"
> + announcement is sent to the other processor, in order to let
> + it know about the creation of the channel (this way remote
> + clients know they can start sending messages).
> +
> + The listening entity (or client) which communicates with a
> + remote processor is referred as rpmsg driver. The rpmsg device
> + and rpmsg driver are matched based on rpmsg device name (see
> + /sys/bus/rpmsg/devices/.../name above) and rpmsg driver ID table.
> +
> + This sysfs entry contains an additional optional description of
> + the rpmsg device that can be optionally included as part of the
> + "name service" announcement. This description is then passed on
> + to the corresponding rpmsg drivers to further distinguish multiple
> + devices associated with the same rpmsg driver.
> diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
> index f46c787733e8..cfdabddc15ac 100644
> --- a/drivers/rpmsg/qcom_glink_native.c
> +++ b/drivers/rpmsg/qcom_glink_native.c
> @@ -1456,6 +1456,7 @@ static void qcom_glink_rx_close(struct qcom_glink *glink, unsigned int rcid)
> strncpy(chinfo.name, channel->name, sizeof(chinfo.name));
> chinfo.src = RPMSG_ADDR_ANY;
> chinfo.dst = RPMSG_ADDR_ANY;
> + chinfo.desc[0] = '\0';
>
> rpmsg_unregister_device(glink->dev, &chinfo);
> }
> diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
> index 4abbeea782fa..7cd6b9c47065 100644
> --- a/drivers/rpmsg/qcom_smd.c
> +++ b/drivers/rpmsg/qcom_smd.c
> @@ -1307,6 +1307,7 @@ static void qcom_channel_state_worker(struct work_struct *work)
> strncpy(chinfo.name, channel->name, sizeof(chinfo.name));
> chinfo.src = RPMSG_ADDR_ANY;
> chinfo.dst = RPMSG_ADDR_ANY;
> + chinfo.desc[0] = '\0';
> rpmsg_unregister_device(&edge->dev, &chinfo);
> channel->registered = false;
> spin_lock_irqsave(&edge->channels_lock, flags);
> diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
> index eea5ebbb5119..4bd91445a2fd 100644
> --- a/drivers/rpmsg/rpmsg_char.c
> +++ b/drivers/rpmsg/rpmsg_char.c
> @@ -442,6 +442,7 @@ static long rpmsg_ctrldev_ioctl(struct file *fp, unsigned int cmd,
> chinfo.name[RPMSG_NAME_SIZE-1] = '\0';
> chinfo.src = eptinfo.src;
> chinfo.dst = eptinfo.dst;
> + chinfo.desc[0] = '\0';
>
> return rpmsg_eptdev_create(ctrldev, chinfo);
> };


It would be good to add DEVICE_ATTR_RO(desc) / desc_show()


> diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
> index ea88fd4e2a6e..334a50425b5c 100644
> --- a/drivers/rpmsg/rpmsg_core.c
> +++ b/drivers/rpmsg/rpmsg_core.c
> @@ -302,6 +302,10 @@ static int rpmsg_device_match(struct device *dev, void *data)
> if (strncmp(chinfo->name, rpdev->id.name, RPMSG_NAME_SIZE))
> return 0;
>
> + if (chinfo->desc && chinfo->desc != rpdev->desc &&


chinfo->desc is defined as 'char desc[RPMSG_NAME_SIZE]', so I do not
think that you shall check chinfo->desc (can't be NULL)

Did you want to check *chinfo->desc ? (desc differs from '\0')

I can't understand the "chinfo->desc != rpdec->desc" test.


> + strncmp(chinfo->desc, rpdev->desc, RPMSG_NAME_SIZE))
> + return 0;
> +
> /* found a match ! */
> return 1;
> }
> @@ -365,6 +369,7 @@ static DEVICE_ATTR_RW(field)
>
> /* for more info, see Documentation/ABI/testing/sysfs-bus-rpmsg */
> rpmsg_show_attr(name, id.name, "%s\n");
> +rpmsg_show_attr(desc, desc, "%s\n");
> rpmsg_show_attr(src, src, "0x%x\n");
> rpmsg_show_attr(dst, dst, "0x%x\n");
> rpmsg_show_attr(announce, announce ? "true" : "false", "%s\n");
> @@ -386,6 +391,7 @@ static DEVICE_ATTR_RO(modalias);
>
> static struct attribute *rpmsg_dev_attrs[] = {
> &dev_attr_name.attr,
> + &dev_attr_desc.attr,
> &dev_attr_modalias.attr,
> &dev_attr_dst.attr,
> &dev_attr_src.attr,


What about adding strncpy(desc) in rpmsg_dev_probe() ?


> diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
> index 376ebbf880d6..49901582ff0e 100644
> --- a/drivers/rpmsg/virtio_rpmsg_bus.c
> +++ b/drivers/rpmsg/virtio_rpmsg_bus.c
> @@ -110,6 +110,23 @@ struct rpmsg_ns_msg {
> u32 flags;
> } __packed;
>
> +/**
> + * struct rpmsg_ns_msg_ext - dynamic name service announcement message v2
> + * @name: name of remote service that is published
> + * @desc: description of remote service
> + * @addr: address of remote service that is published
> + * @flags: indicates whether service is created or destroyed
> + *
> + * Interchangeable nameservice message with rpmsg_ns_msg. This one has
> + * the addition of the desc field for extra flexibility.
> + */
> +struct rpmsg_ns_msg_ext {
> + char name[RPMSG_NAME_SIZE];
> + char desc[RPMSG_NAME_SIZE];


It may be better to use a dedicated value for desc length (#define
RPMSG_DESC_SIZE).

I also wonder if 32 chars are enough for a (text) description.


> + u32 addr;
> + u32 flags;
> +} __packed;
> +
> /**
> * enum rpmsg_ns_flags - dynamic name service announcement flags
> *
> @@ -402,8 +419,9 @@ static struct rpmsg_device *rpmsg_create_channel(struct virtproc_info *vrp,
> if (tmp) {
> /* decrement the matched device's refcount back */
> put_device(tmp);
> - dev_err(dev, "channel %s:%x:%x already exist\n",
> - chinfo->name, chinfo->src, chinfo->dst);
> + dev_err(dev, "channel %s:%s:%x:%x already exist\n",
> + chinfo->name, chinfo->desc,
> + chinfo->src, chinfo->dst);
> return NULL;
> }
>
> @@ -419,6 +437,7 @@ static struct rpmsg_device *rpmsg_create_channel(struct virtproc_info *vrp,
> rpdev->src = chinfo->src;
> rpdev->dst = chinfo->dst;
> rpdev->ops = &virtio_rpmsg_ops;
> + strncpy(rpdev->desc, chinfo->desc, RPMSG_NAME_SIZE);
>
> /*
> * rpmsg server channels has predefined local address (for now),
> @@ -816,18 +835,29 @@ static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
> void *priv, u32 src)
> {
> struct rpmsg_ns_msg *msg = data;
> + struct rpmsg_ns_msg_ext *msg_ext = data;
> struct rpmsg_device *newch;
> struct rpmsg_channel_info chinfo;
> struct virtproc_info *vrp = priv;
> struct device *dev = &vrp->vdev->dev;
> int ret;
> + u32 addr;
> + u32 flags;
>
> #if defined(CONFIG_DYNAMIC_DEBUG)
> dynamic_hex_dump("NS announcement: ", DUMP_PREFIX_NONE, 16, 1,
> data, len, true);
> #endif
>
> - if (len != sizeof(*msg)) {
> + if (len == sizeof(*msg)) {
> + addr = msg->addr;
> + flags = msg->flags;
> + chinfo.desc[0] = '\0';
> + } else if (len == sizeof(*msg_ext)) {
> + addr = msg_ext->addr;
> + flags = msg_ext->flags;
> + strncpy(chinfo.desc, msg_ext->desc, sizeof(chinfo.desc));
> + } else if (len != sizeof(*msg)) {


shall be 'else', not 'else if'


> dev_err(dev, "malformed ns msg (%d)\n", len);
> return -EINVAL;
> }
> @@ -847,14 +877,14 @@ static int rpmsg_ns_cb(struct rpmsg_device *rpdev, void *data, int len,
> msg->name[RPMSG_NAME_SIZE - 1] = '\0';
>
> dev_info(dev, "%sing channel %s addr 0x%x\n",
> - msg->flags & RPMSG_NS_DESTROY ? "destroy" : "creat",
> - msg->name, msg->addr);
> + flags & RPMSG_NS_DESTROY ? "destroy" : "creat",
> + msg->name, addr);
>
> strncpy(chinfo.name, msg->name, sizeof(chinfo.name));
> chinfo.src = RPMSG_ADDR_ANY;
> - chinfo.dst = msg->addr;
> + chinfo.dst = addr;
>
> - if (msg->flags & RPMSG_NS_DESTROY) {
> + if (flags & RPMSG_NS_DESTROY) {
> ret = rpmsg_unregister_device(&vrp->vdev->dev, &chinfo);
> if (ret)
> dev_err(dev, "rpmsg_destroy_channel failed: %d\n", ret);
> diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
> index e5c68051fb17..ad9f28dc13f1 100644
> --- a/drivers/soc/qcom/wcnss_ctrl.c
> +++ b/drivers/soc/qcom/wcnss_ctrl.c
> @@ -276,6 +276,7 @@ struct rpmsg_endpoint *qcom_wcnss_open_channel(void *wcnss, const char *name, rp
> strscpy(chinfo.name, name, sizeof(chinfo.name));
> chinfo.src = RPMSG_ADDR_ANY;
> chinfo.dst = RPMSG_ADDR_ANY;
> + chinfo.desc[0] = '\0';
>
> return rpmsg_create_ept(_wcnss->channel->rpdev, cb, priv, chinfo);
> }
> diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
> index 9fe156d1c018..436faf04ba1c 100644
> --- a/include/linux/rpmsg.h
> +++ b/include/linux/rpmsg.h
> @@ -28,11 +28,13 @@ struct rpmsg_endpoint_ops;
> /**
> * struct rpmsg_channel_info - channel info representation
> * @name: name of service
> + * @desc: description of service
> * @src: local address
> * @dst: destination address
> */
> struct rpmsg_channel_info {
> char name[RPMSG_NAME_SIZE];
> + char desc[RPMSG_NAME_SIZE];
> u32 src;
> u32 dst;
> };
> @@ -42,6 +44,7 @@ struct rpmsg_channel_info {
> * @dev: the device struct
> * @id: device id (used to match between rpmsg drivers and devices)
> * @driver_override: driver name to force a match
> + * @desc: description of remote service
> * @src: local address
> * @dst: destination address
> * @ept: the rpmsg endpoint of this channel
> @@ -51,6 +54,7 @@ struct rpmsg_device {
> struct device dev;
> struct rpmsg_device_id id;
> char *driver_override;
> + char desc[RPMSG_NAME_SIZE];
> u32 src;
> u32 dst;
> struct rpmsg_endpoint *ept;

\
 
 \ /
  Last update: 2019-08-12 15:45    [W:0.045 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site