lkml.org 
[lkml]   [2019]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: [linux-sunxi] [PATCH] ARM64: dts: allwinner: Add devicetree for pine H64 modelA evaluation board
    Date
    Dne četrtek, 08. avgust 2019 ob 10:42:53 CEST je Corentin Labbe napisal(a):
    > This patch adds the evaluation variant of the model A of the PineH64.
    > The model A has the same size of the pine64 and has a PCIE slot.
    >
    > The only devicetree difference with current pineH64, is the PHY
    > regulator.

    I have Model A board which also needs ddc-en-gpios property for HDMI connector
    in order for HDMI to work correctly. Otherwise it will just use 1024x768
    resolution. Can you confirm that?

    Best regards,
    Jernej

    >
    > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
    > ---
    > arch/arm64/boot/dts/allwinner/Makefile | 1 +
    > .../sun50i-h6-pine-h64-modelA-eval.dts | 26 +++++++++++++++++++
    > 2 files changed, 27 insertions(+)
    > create mode 100644
    > arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
    >
    > diff --git a/arch/arm64/boot/dts/allwinner/Makefile
    > b/arch/arm64/boot/dts/allwinner/Makefile index f6db0611cb85..9a02166cbf72
    > 100644
    > --- a/arch/arm64/boot/dts/allwinner/Makefile
    > +++ b/arch/arm64/boot/dts/allwinner/Makefile
    > @@ -25,3 +25,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
    > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
    > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
    > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
    > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-modelA-eval.dtb
    > diff --git
    > a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
    > b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts new file
    > mode 100644
    > index 000000000000..d8ff02747efe
    > --- /dev/null
    > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
    > @@ -0,0 +1,26 @@
    > +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
    > +/*
    > + * Copyright (C) 2019 Corentin Labbe <clabbe.montjoie@gmail.com>
    > + */
    > +
    > +#include "sun50i-h6-pine-h64.dts"
    > +
    > +/ {
    > + model = "Pine H64 model A evaluation board";
    > + compatible = "pine64,pine-h64-modelA-eval", "allwinner,sun50i-h6";
    > +
    > + reg_gmac_3v3: gmac-3v3 {
    > + compatible = "regulator-fixed";
    > + regulator-name = "vcc-gmac-3v3";
    > + regulator-min-microvolt = <3300000>;
    > + regulator-max-microvolt = <3300000>;
    > + startup-delay-us = <100000>;
    > + gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
    > + enable-active-high;
    > + };
    > +
    > +};
    > +
    > +&emac {
    > + phy-supply = <&reg_gmac_3v3>;
    > +};




    \
     
     \ /
      Last update: 2019-08-12 12:57    [W:4.607 / U:0.112 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site