lkml.org 
[lkml]   [2019]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 0/7] Add MMC packed function
From
Date
On 12/08/19 8:20 AM, Baolin Wang wrote:
> Hi,
>
> On Mon, 22 Jul 2019 at 21:10, Baolin Wang <baolin.wang@linaro.org> wrote:
>>
>> Hi All,
>>
>> Now some SD/MMC controllers can support packed command or packed request,
>> that means it can package multiple requests to host controller to be handled
>> at one time, which can improve the I/O performence. Thus this patchset is
>> used to add the MMC packed function to support packed request or packed
>> command.
>>
>> In this patch set, I implemented the SD host ADMA3 transfer mode to support
>> packed request. The ADMA3 transfer mode can process a multi-block data transfer
>> by using a pair of command descriptor and ADMA2 descriptor. In future we can
>> easily expand the MMC packed function to support packed command.
>>
>> Below are some comparison data between packed request and non-packed request
>> with fio tool. The fio command I used is like below with changing the
>> '--rw' parameter and enabling the direct IO flag to measure the actual hardware
>> transfer speed.
>>
>> ./fio --filename=/dev/mmcblk0p30 --direct=1 --iodepth=20 --rw=read --bs=4K --size=512M --group_reporting --numjobs=20 --name=test_read
>>
>> My eMMC card working at HS400 Enhanced strobe mode:
>> [ 2.229856] mmc0: new HS400 Enhanced strobe MMC card at address 0001
>> [ 2.237566] mmcblk0: mmc0:0001 HBG4a2 29.1 GiB
>> [ 2.242621] mmcblk0boot0: mmc0:0001 HBG4a2 partition 1 4.00 MiB
>> [ 2.249110] mmcblk0boot1: mmc0:0001 HBG4a2 partition 2 4.00 MiB
>> [ 2.255307] mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00 MiB, chardev (248:0)
>>
>> 1. Non-packed request
>> I tested 3 times for each case and output a average speed.
>>
>> 1) Sequential read:
>> Speed: 28.9MiB/s, 26.4MiB/s, 30.9MiB/s
>> Average speed: 28.7MiB/s

This seems surprising low for a HS400ES card. Do you know why that is?

>>
>> 2) Random read:
>> Speed: 18.2MiB/s, 8.9MiB/s, 15.8MiB/s
>> Average speed: 14.3MiB/s
>>
>> 3) Sequential write:
>> Speed: 21.1MiB/s, 27.9MiB/s, 25MiB/s
>> Average speed: 24.7MiB/s
>>
>> 4) Random write:
>> Speed: 21.5MiB/s, 18.1MiB/s, 18.1MiB/s
>> Average speed: 19.2MiB/s
>>
>> 2. Packed request
>> In packed request mode, I set the host controller can package maximum 10
>> requests at one time (Actually I can increase the package number), and I
>> enabled read/write packed request mode. Also I tested 3 times for each
>> case and output a average speed.
>>
>> 1) Sequential read:
>> Speed: 165MiB/s, 167MiB/s, 164MiB/s
>> Average speed: 165.3MiB/s
>>
>> 2) Random read:
>> Speed: 147MiB/s, 141MiB/s, 144MiB/s
>> Average speed: 144MiB/s
>>
>> 3) Sequential write:
>> Speed: 87.8MiB/s, 89.1MiB/s, 90.0MiB/s
>> Average speed: 89MiB/s
>>
>> 4) Random write:
>> Speed: 90.9MiB/s, 89.8MiB/s, 90.4MiB/s
>> Average speed: 90.4MiB/s
>>
>> Form above data, we can see the packed request can improve the performance greatly.
>> Any comments are welcome. Thanks a lot.
>
> Any comments for this patch set? Thanks.

Did you consider adapting the CQE interface?

\
 
 \ /
  Last update: 2019-08-12 11:00    [W:0.194 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site