Messages in this thread | | | Date | Mon, 12 Aug 2019 10:14:45 +0200 | From | Maxime Ripard <> | Subject | Re: [linux-sunxi] [PATCH v8 0/4] Add support for Orange Pi 3 |
| |
On Mon, Aug 12, 2019 at 03:54:03PM +0800, Chen-Yu Tsai wrote: > On Mon, Aug 12, 2019 at 3:45 PM Jernej Škrabec <jernej.skrabec@gmail.com> wrote: > > > > Dne torek, 06. avgust 2019 ob 17:57:39 CEST je megous@megous.com napisal(a): > > > From: Ondrej Jirman <megous@megous.com> > > > > > > This series implements support for Xunlong Orange Pi 3 board. There > > > are only a few patches remaining. > > > > > > - ethernet support - just a DT change (patch 1) > > > - HDMI support (patches 2-4) > > > > > > For some people, ethernet doesn't work after reboot because u-boot doesn't > > > support AXP805 PMIC, and will not turn off the etherent PHY regulators. > > > So the regulator controlled by gpio will be shut down, but the other one > > > controlled by the AXP PMIC will not. > > > > > > This is a problem only when running with a builtin driver. This needs > > > to be fixed in u-boot. > > > > > > > > > Please take a look. > > > > Is there anything missing? It would be nice to get this in 5.4. There is a lot > > of H6 boards which needs DDC bus enable mechanism (part of H6 reference > > design), including Beelink GS1 which already has HDMI node in mainline kernel > > DT, but due to disabled DDC lines works only with 1024x768 (fallback > > resolution in DRM core). > > I have a few minor comments about patch 1. > > I think the HDMI bits are good, but I don't have maintainership / commit > permissions for drm-misc, so I'll have to wait until someone applies patches > 2 and 3 before I apply patch 4.
I've applied 2,3 and 4
Thanks! Maxime
-- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com [unhandled content-type:application/pgp-signature] | |