lkml.org 
[lkml]   [2019]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 0/6] Support for Allwinner V3/S3L and Sochip S3
On Sun, Jul 28, 2019 at 11:12:21AM +0800, Icenowy Zheng wrote:
> This patchset tries to add support for Allwinner V3/S3L and Sochip S3.
>
> Allwinner V3/V3s/S3L and Sochip S3 share the same die, but with
> different package. V3 is BGA w/o co-packaged DDR, V3s is QFP w/ DDR2,
> S3L is BGA w/ DDR2 and S3 is BGA w/ DDR3. (S3 and S3L is compatible
> for pinout, but because of different DDR, DDR voltage is different
> between the two variants). Because of the pin count of V3s is
> restricted due to the package, some pins are not bound on V3s, but
> they're bound on V3/S3/S3L.
>
> Currently the kernel is only prepared for the features available on V3s.
> This patchset adds the features missing on V3s for using them on
> V3/S3/S3L, and add bindings for V3/S3/S3L. It also adds a S3 SoM by
> Sipeed, called Lichee Zero Plus.
>
> Icenowy Zheng (6):
> pinctrl: sunxi: v3s: introduce support for V3
> clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks
> clk: sunxi-ng: v3s: add Allwinner V3 support
> ARM: sunxi: dts: s3/s3l/v3: add DTSI files for S3/S3L/V3 SoCs
> dt-bindings: arm: sunxi: add binding for Lichee Zero Plus core board
> ARM: dts: sun8i: s3: add devicetree for Lichee zero plus w/ S3

Applied the patches 2 to 6, thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-08-12 10:08    [W:0.112 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site