lkml.org 
[lkml]   [2019]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] PCI: dwc: Return directly when num-lanes is not found
Date
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

The num-lanes is optional, so probably it isn't added
on some platforms. The subsequent programming is base
on the num-lanes, hence return when it is not found.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
drivers/pci/controller/dwc/pcie-designware.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 7d25102c304c..0a89bfd1636e 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -423,8 +423,10 @@ void dw_pcie_setup(struct dw_pcie *pci)


ret = of_property_read_u32(np, "num-lanes", &lanes);
- if (ret)
- lanes = 0;
+ if (ret) {
+ dev_dbg(pci->dev, "property num-lanes isn't found\n");
+ return;
+ }

/* Set the number of lanes */
val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
--
2.17.1
\
 
 \ /
  Last update: 2019-08-12 06:23    [W:0.146 / U:3.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site