lkml.org 
[lkml]   [2019]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/3] Collapse vimc into single monolithic driver
From
Date
On 8/12/19 1:10 PM, Shuah Khan wrote:
> On 8/12/19 12:52 PM, André Almeida wrote:
>> Hi Shuah,
>>
>> On 8/12/19 11:08 AM, Shuah Khan wrote:
>>> On 8/9/19 9:51 PM, Helen Koike wrote:
>>>> Hi Andre,
>>>>
>>>> Thanks for testing this.
>>>>
>>>> On 8/9/19 9:24 PM, André Almeida wrote:
>>>>> On 8/9/19 9:17 PM, Shuah Khan wrote:
>>>>>> Hi Andre,
>>>>>>
>>>>>> On 8/9/19 5:52 PM, André Almeida wrote:
>>>>>>> Hello Shuah,
>>>>>>>
>>>>>>> Thanks for the patch, I did some comments below.
>>>>>>>
>>>>>>> On 8/9/19 6:45 PM, Shuah Khan wrote:
>>>>>>>> vimc uses Component API to split the driver into functional
>>>>>>>> components.
>>>>>>>> The real hardware resembles a monolith structure than component and
>>>>>>>> component structure added a level of complexity making it hard to
>>>>>>>> maintain without adding any real benefit.
>>>>>>>>        The sensor is one vimc component that would makes sense
>>>>>>>> to be a
>>>>>>>> separate
>>>>>>>> module to closely align with the real hardware. It would be
>>>>>>>> easier to
>>>>>>>> collapse vimc into single monolithic driver first and then split
>>>>>>>> the
>>>>>>>> sensor off as a separate module.
>>>>>>>>
>>>>>>>> This patch series emoves the component API and makes minimal
>>>>>>>> changes to
>>>>>>>> the code base preserving the functional division of the code
>>>>>>>> structure.
>>>>>>>> Preserving the functional structure allows us to split the
>>>>>>>> sensor off
>>>>>>>> as a separate module in the future.
>>>>>>>>
>>>>>>>> Major design elements in this change are:
>>>>>>>>        - Use existing struct vimc_ent_config and struct
>>>>>>>> vimc_pipeline_config
>>>>>>>>          to drive the initialization of the functional components.
>>>>>>>>        - Make vimc_ent_config global by moving it to vimc.h
>>>>>>>>        - Add two new hooks add and rm to initialize and register,
>>>>>>>> unregister
>>>>>>>>          and free subdevs.
>>>>>>>>        - All component API is now gone and bind and unbind hooks
>>>>>>>> are
>>>>>>>> modified
>>>>>>>>          to do "add" and "rm" with minimal changes to just add
>>>>>>>> and rm
>>>>>>>> subdevs.
>>>>>>>>        - vimc-core's bind and unbind are now register and
>>>>>>>> unregister.
>>>>>>>>        - vimc-core invokes "add" hooks from its
>>>>>>>> vimc_register_devices().
>>>>>>>>          The "add" hooks remain the same and register subdevs. They
>>>>>>>> don't
>>>>>>>>          create platform devices of their own and use vimc's
>>>>>>>> pdev.dev as
>>>>>>>>          their reference device. The "add" hooks save their
>>>>>>>> vimc_ent_device(s)
>>>>>>>>          in the corresponding vimc_ent_config.
>>>>>>>>        - vimc-core invokes "rm" hooks from its unregister to
>>>>>>>> unregister
>>>>>>>> subdevs
>>>>>>>>          and cleanup.
>>>>>>>>        - vimc-core invokes "add" and "rm" hooks with pointer to
>>>>>>>> struct
>>>>>>>> vimc_device
>>>>>>>>          and the corresponding struct vimc_ent_config pointer.
>>>>>>>>        The following configure and stream test works on all
>>>>>>>> devices.
>>>>>>>>             media-ctl -d platform:vimc -V '"Sensor
>>>>>>>> A":0[fmt:SBGGR8_1X8/640x480]'
>>>>>>>>        media-ctl -d platform:vimc -V '"Debayer
>>>>>>>> A":0[fmt:SBGGR8_1X8/640x480]'
>>>>>>>>        media-ctl -d platform:vimc -V '"Sensor
>>>>>>>> B":0[fmt:SBGGR8_1X8/640x480]'
>>>>>>>>        media-ctl -d platform:vimc -V '"Debayer
>>>>>>>> B":0[fmt:SBGGR8_1X8/640x480]'
>>>>>>>>             v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v
>>>>>>>> width=1920,height=1440
>>>>>>>>        v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v
>>>>>>>> pixelformat=BA81
>>>>>>>>        v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v
>>>>>>>> pixelformat=BA81
>>>>>>>>             v4l2-ctl --stream-mmap --stream-count=100 -d
>>>>>>>> /dev/video1
>>>>>>>>        v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2
>>>>>>>>        v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video3
>>>>>>>>
>>>>>>>> The third patch in the series fixes a general protection fault
>>>>>>>> found
>>>>>>>> when rmmod is done while stream is active.
>>>>>>>
>>>>>>> I applied your patch on top of media_tree/master and I did some
>>>>>>> testing.
>>>>>>> Not sure if I did something wrong, but just adding and removing the
>>>>>>> module generated a kernel panic:
>>>>>>
>>>>>> Thanks for testing.
>>>>>>
>>>>>> Odd. I tested modprobe and rmmod both.I was working on Linux 5.3-rc2.
>>>>>> I will apply these to media latest and work from there. I have to
>>>>>> rebase these on top of the reverts from Lucas and Helen
>>>>>
>>>>> Ok, please let me know if I succeeded to reproduce.
>>>>>
>>>>>>>
>>>>>>> ~# modprobe vimc
>>>>>>> ~# rmmod vimc
>>>>>>> [   16.452974] stack segment: 0000 [#1] SMP PTI
>>>>>>> [   16.453688] CPU: 0 PID: 2038 Comm: rmmod Not tainted
>>>>>>> 5.3.0-rc2+ #36
>>>>>>> [   16.454678] Hardware name: QEMU Standard PC (i440FX + PIIX,
>>>>>>> 1996),
>>>>>>> BIOS 1.12.0-20181126_142135-anatol 04/01/2014
>>>>>>> [   16.456191] RIP: 0010:kfree+0x4d/0x240
>>>>>>>
>>>>>>> <registers values...>
>>>>>>>
>>>>>>> [   16.469188] Call Trace:
>>>>>>> [   16.469666]  vimc_remove+0x35/0x90 [vimc]
>>>>>>> [   16.470436]  platform_drv_remove+0x1f/0x40
>>>>>>> [   16.471233]  device_release_driver_internal+0xd3/0x1b0
>>>>>>> [   16.472184]  driver_detach+0x37/0x6b
>>>>>>> [   16.472882]  bus_remove_driver+0x50/0xc1
>>>>>>> [   16.473569]  vimc_exit+0xc/0xca0 [vimc]
>>>>>>> [   16.474231]  __x64_sys_delete_module+0x18d/0x240
>>>>>>> [   16.475036]  do_syscall_64+0x43/0x110
>>>>>>> [   16.475656]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
>>>>>>> [   16.476504] RIP: 0033:0x7fceb8dafa4b
>>>>>>>
>>>>>>> <registers values...>
>>>>>>>
>>>>>>> [   16.484853] Modules linked in: vimc(-) videobuf2_vmalloc
>>>>>>> videobuf2_memops v4l2_tpg videobuf2_v4l2 videobuf2_common
>>>>>>> [   16.486187] ---[ end trace 91e5e0894e254d49 ]---
>>>>>>> [   16.486758] RIP: 0010:kfree+0x4d/0x240
>>>>>>>
>>>>>>> <registers values...>
>>>>>>>
>>>>>>> fish: “rmmod vimc” terminated by signal SIGSEGV (Address boundary
>>>>>>> error)
>>>>>>>
>>>>>>> I just added the module after booting, no other action was made.
>>>>>>> Here is
>>>>>>> how my `git log --oneline` looks like:
>>>>>>>
>>>>>>> 897d708e922b media: vimc: Fix gpf in rmmod path when stream is
>>>>>>> active
>>>>>>> 2e4a5ad8ad6d media: vimc: Collapse component structure into a single
>>>>>>> monolithic driver
>>>>>>> 7c8da1687e92 media: vimc: move private defines to a common header
>>>>>>> 97299a303532 media: Remove dev_err() usage after platform_get_irq()
>>>>>>> 25a3d6bac6b9 media: adv7511/cobalt: rename driver name to
>>>>>>> adv7511-v4l2
>>>>
>>>> I couldn't reproduce the error, my tree looks the same:
>>>>
>>>> [I] koike@floko ~/m/o/linux> git log --oneline
>>>> e3345155c8ed (HEAD) media: vimc: Fix gpf in rmmod path when stream is
>>>> active
>>>> 43e9e2fe761f media: vimc: Collapse component structure into a single
>>>> monolithic driver
>>>> 8a6d0b9adde0 media: vimc: move private defines to a common header
>>>> 97299a303532 (media/master) media: Remove dev_err() usage after
>>>> platform_get_irq()
>>>> 25a3d6bac6b9 media: adv7511/cobalt: rename driver name to adv7511-v4l2
>>>
>>> Thanks Helen for trying to reproduce and sharing the result.
>>
>> Me and Helen found out what is the problem. If you follow this call
>> trace:
>>
>> vimc_ent_sd_unregister()
>> v4l2_device_unregister_subdev()
>> v4l2_subdev_release()
>>
>> You'll notice that this last function calls the `release` callback
>> implementation of the subdevice. For instance, the `release` of
>> vimc-sensor is this one:
>>
>> static void vimc_sen_release(struct v4l2_subdev *sd)
>> {
>>     struct vimc_sen_device *vsen =
>>                 container_of(sd, struct vimc_sen_device, sd);
>>
>>     v4l2_ctrl_handler_free(&vsen->hdl);
>>     tpg_free(&vsen->tpg);
>>     kfree(vsen);
>> }
>>
>> And then you can see that `vsen` has been freed. Back to
>> vimc_ent_sd_unregister(), after v4l2_device_unregister_subdev(), the
>> function will call vimc_pads_cleanup(). This is basically a
>> kfree(ved->pads), but `ved` has just been freed at
>> v4l2_subdev_release(), producing a memory fault.
>>
>> To fix that, we found two options:
>>
>> - place the kfree(ved->pads) inside the release callback of each
>> subdevice and removing vimc_pads_cleanup() from
>> vimc_ent_sd_unregister()
>> - use a auxiliary variable to hold the address of the pads, for instance:
>>
>> void vimc_ent_sd_unregister(...)
>> {
>>      struct media_pad *pads = ved->pads;
>>      ...
>>      vimc_pads_cleanup(pads);
>> }
>>
>>
>
> I fixed a problem in the thirds patch. vimc-capture uses the first
> approach - placing the kfree(ved->pads) inside the release callback.
>
> I am debugging another such problem in unbind path while streaming.
> I am working on v2 and I will look for the rmmod problem and fix it.
>
> thanks again for testing and finding the root cause.
> -- Shuah

Hi Andre,

Here is what's happening.

Before this change, you can't really do rmmod vimc, because vimc is in
use by other component drivers. With the collapse, now you can actually
do rmmod on vimc and this problem in vimc_ent_sd_unregister() that frees
pads first and the does v4l2_device_unregister_subdev().

I fixed this in the 3/3 patch. I can reproduce the problem with patches
1 and 2, and patch 3 fixes it.

Did you test with the third patch in this series?

thanks,
-- Shuah

\
 
 \ /
  Last update: 2019-08-13 00:16    [W:0.656 / U:0.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site