lkml.org 
[lkml]   [2019]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] arm64: dts: ls1028a: fix gpio nodes
Date


> -----Original Message-----
> From: Shawn Guo <shawnguo@kernel.org>
> Sent: Monday, August 12, 2019 8:47 AM
> To: Hui Song <hui.song_1@nxp.com>; Leo Li <leoyang.li@nxp.com>
> Cc: Rob Herring <robh+dt@kernel.org>; Mark Rutland
> <mark.rutland@arm.com>; Linus Walleij <linus.walleij@linaro.org>; Bartosz
> Golaszewski <bgolaszewski@baylibre.com>; linux-arm-
> kernel@lists.infradead.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-gpio@vger.kernel.org
> Subject: Re: [PATCH] arm64: dts: ls1028a: fix gpio nodes
>
> On Mon, Aug 05, 2019 at 02:57:00PM +0800, Hui Song wrote:
> > From: Song Hui <hui.song_1@nxp.com>
> >
> > Update the nodes to include little-endian property to be consistent
> > with the hardware.
> >
> > Signed-off-by: Song Hui <hui.song_1@nxp.com>
>
> @Leo, looks good?

Acked-by: Li Yang <leoyang.li@nxp.com>

>
> Shawn
>
> > ---
> > arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 9 ++++++---
> > 1 file changed, 6 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > index aef5b06..7ccbbfc 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > @@ -277,33 +277,36 @@
> > };
> >
> > gpio1: gpio@2300000 {
> > - compatible = "fsl,qoriq-gpio";
> > + compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
> > reg = <0x0 0x2300000 0x0 0x10000>;
> > interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> > gpio-controller;
> > #gpio-cells = <2>;
> > interrupt-controller;
> > #interrupt-cells = <2>;
> > + little-endian;
> > };
> >
> > gpio2: gpio@2310000 {
> > - compatible = "fsl,qoriq-gpio";
> > + compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
> > reg = <0x0 0x2310000 0x0 0x10000>;
> > interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> > gpio-controller;
> > #gpio-cells = <2>;
> > interrupt-controller;
> > #interrupt-cells = <2>;
> > + little-endian;
> > };
> >
> > gpio3: gpio@2320000 {
> > - compatible = "fsl,qoriq-gpio";
> > + compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
> > reg = <0x0 0x2320000 0x0 0x10000>;
> > interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> > gpio-controller;
> > #gpio-cells = <2>;
> > interrupt-controller;
> > #interrupt-cells = <2>;
> > + little-endian;
> > };
> >
> > usb0: usb@3100000 {
> > --
> > 2.9.5
> >

\
 
 \ /
  Last update: 2019-08-12 23:02    [W:0.088 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site