lkml.org 
[lkml]   [2019]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 01/16] ARM: remove ks8695 platform
From
Date
Hi Arnd,

On 10/8/19 6:27 am, Arnd Bergmann wrote:
> ks8695 is an older SoC originally made by Kendin, which was later acquired
> by Micrel, and subsequently by Microchip.
>
> The platform port was originally contributed by Andrew Victor and Ben
> Dooks, and later maintained by Greg Ungerer.
>
> When I recently submitted cleanups, but Greg noted that the platform no
> longer boots and nobody is using it any more, we decided to remove it.
>
> Cc: Greg Ungerer <gerg@kernel.org>

Acked-by: Greg Ungerer <gerg@kernel.org>

Thanks for taking care of this.

Regards
Greg



> Cc: Andrew Victor <linux@maxim.org.za>
> Cc: Ben Dooks <ben.dooks@codethink.co.uk>
> Link: https://wikidevi.com/wiki/Micrel
> Link: https://lore.kernel.org/linux-arm-kernel/2bc41895-d4f9-896c-0726-0b2862fcbf25@kernel.org/
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> MAINTAINERS | 6 -
> arch/arm/Kconfig | 16 +-
> arch/arm/Kconfig.debug | 8 -
> arch/arm/Makefile | 1 -
> arch/arm/configs/acs5k_defconfig | 77 ------
> arch/arm/configs/acs5k_tiny_defconfig | 69 -----
> arch/arm/configs/ks8695_defconfig | 67 -----
> arch/arm/include/debug/ks8695.S | 37 ---
> arch/arm/mach-ks8695/Kconfig | 88 -------
> arch/arm/mach-ks8695/Makefile | 23 --
> arch/arm/mach-ks8695/Makefile.boot | 9 -
> arch/arm/mach-ks8695/board-acs5k.c | 238 -----------------
> arch/arm/mach-ks8695/board-dsm320.c | 127 ---------
> arch/arm/mach-ks8695/board-micrel.c | 59 -----
> arch/arm/mach-ks8695/board-og.c | 197 --------------
> arch/arm/mach-ks8695/board-sg.c | 118 ---------
> arch/arm/mach-ks8695/cpu.c | 60 -----
> arch/arm/mach-ks8695/devices.c | 197 --------------
> arch/arm/mach-ks8695/devices.h | 29 --
> arch/arm/mach-ks8695/generic.h | 12 -
> .../mach-ks8695/include/mach/entry-macro.S | 47 ----
> .../mach-ks8695/include/mach/gpio-ks8695.h | 36 ---
> arch/arm/mach-ks8695/include/mach/hardware.h | 42 ---
> arch/arm/mach-ks8695/include/mach/irqs.h | 51 ----
> arch/arm/mach-ks8695/include/mach/memory.h | 51 ----
> arch/arm/mach-ks8695/include/mach/regs-gpio.h | 55 ----
> arch/arm/mach-ks8695/include/mach/regs-irq.h | 41 ---
> arch/arm/mach-ks8695/include/mach/regs-misc.h | 97 -------
> .../mach-ks8695/include/mach/regs-switch.h | 66 -----
> arch/arm/mach-ks8695/include/mach/regs-uart.h | 89 -------
> .../arm/mach-ks8695/include/mach/uncompress.h | 33 ---
> arch/arm/mach-ks8695/irq.c | 164 ------------
> arch/arm/mach-ks8695/pci.c | 247 ------------------
> arch/arm/mach-ks8695/regs-hpna.h | 25 --
> arch/arm/mach-ks8695/regs-lan.h | 65 -----
> arch/arm/mach-ks8695/regs-mem.h | 89 -------
> arch/arm/mach-ks8695/regs-pci.h | 53 ----
> arch/arm/mach-ks8695/regs-sys.h | 34 ---
> arch/arm/mach-ks8695/regs-wan.h | 65 -----
> arch/arm/mach-ks8695/time.c | 159 -----------
> arch/arm/mm/Kconfig | 2 +-
> 41 files changed, 5 insertions(+), 2944 deletions(-)
> delete mode 100644 arch/arm/configs/acs5k_defconfig
> delete mode 100644 arch/arm/configs/acs5k_tiny_defconfig
> delete mode 100644 arch/arm/configs/ks8695_defconfig
> delete mode 100644 arch/arm/include/debug/ks8695.S
> delete mode 100644 arch/arm/mach-ks8695/Kconfig
> delete mode 100644 arch/arm/mach-ks8695/Makefile
> delete mode 100644 arch/arm/mach-ks8695/Makefile.boot
> delete mode 100644 arch/arm/mach-ks8695/board-acs5k.c
> delete mode 100644 arch/arm/mach-ks8695/board-dsm320.c
> delete mode 100644 arch/arm/mach-ks8695/board-micrel.c
> delete mode 100644 arch/arm/mach-ks8695/board-og.c
> delete mode 100644 arch/arm/mach-ks8695/board-sg.c
> delete mode 100644 arch/arm/mach-ks8695/cpu.c
> delete mode 100644 arch/arm/mach-ks8695/devices.c
> delete mode 100644 arch/arm/mach-ks8695/devices.h
> delete mode 100644 arch/arm/mach-ks8695/generic.h
> delete mode 100644 arch/arm/mach-ks8695/include/mach/entry-macro.S
> delete mode 100644 arch/arm/mach-ks8695/include/mach/gpio-ks8695.h
> delete mode 100644 arch/arm/mach-ks8695/include/mach/hardware.h
> delete mode 100644 arch/arm/mach-ks8695/include/mach/irqs.h
> delete mode 100644 arch/arm/mach-ks8695/include/mach/memory.h
> delete mode 100644 arch/arm/mach-ks8695/include/mach/regs-gpio.h
> delete mode 100644 arch/arm/mach-ks8695/include/mach/regs-irq.h
> delete mode 100644 arch/arm/mach-ks8695/include/mach/regs-misc.h
> delete mode 100644 arch/arm/mach-ks8695/include/mach/regs-switch.h
> delete mode 100644 arch/arm/mach-ks8695/include/mach/regs-uart.h
> delete mode 100644 arch/arm/mach-ks8695/include/mach/uncompress.h
> delete mode 100644 arch/arm/mach-ks8695/irq.c
> delete mode 100644 arch/arm/mach-ks8695/pci.c
> delete mode 100644 arch/arm/mach-ks8695/regs-hpna.h
> delete mode 100644 arch/arm/mach-ks8695/regs-lan.h
> delete mode 100644 arch/arm/mach-ks8695/regs-mem.h
> delete mode 100644 arch/arm/mach-ks8695/regs-pci.h
> delete mode 100644 arch/arm/mach-ks8695/regs-sys.h
> delete mode 100644 arch/arm/mach-ks8695/regs-wan.h
> delete mode 100644 arch/arm/mach-ks8695/time.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6426db5198f0..9ac40a896ee6 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1921,12 +1921,6 @@ S: Maintained
> F: drivers/phy/mediatek/
> F: Documentation/devicetree/bindings/phy/phy-mtk-*
>
> -ARM/MICREL KS8695 ARCHITECTURE
> -M: Greg Ungerer <gerg@uclinux.org>
> -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> -F: arch/arm/mach-ks8695/
> -S: Odd Fixes
> -
> ARM/Microchip (AT91) SoC support
> M: Nicolas Ferre <nicolas.ferre@microchip.com>
> M: Alexandre Belloni <alexandre.belloni@bootlin.com>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 33b00579beff..61deacf68e13 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -264,7 +264,6 @@ config PHYS_OFFSET
> ARCH_FOOTBRIDGE || \
> ARCH_INTEGRATOR || \
> ARCH_IOP13XX || \
> - ARCH_KS8695 || \
> ARCH_REALVIEW
> default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
> default 0x20000000 if ARCH_S5PV210
> @@ -451,17 +450,6 @@ config ARCH_DOVE
> help
> Support for the Marvell Dove SoC 88AP510
>
> -config ARCH_KS8695
> - bool "Micrel/Kendin KS8695"
> - select CLKSRC_MMIO
> - select CPU_ARM922T
> - select GENERIC_CLOCKEVENTS
> - select GPIOLIB
> - select NEED_MACH_MEMORY_H
> - help
> - Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
> - System-on-Chip devices.
> -
> config ARCH_W90X900
> bool "Nuvoton W90X900 CPU"
> select CLKDEV_LOOKUP
> @@ -744,7 +732,11 @@ source "arch/arm/mach-ixp4xx/Kconfig"
>
> source "arch/arm/mach-keystone/Kconfig"
>
> +<<<<<<< HEAD
> source "arch/arm/mach-ks8695/Kconfig"
> +=======
> +source "arch/arm/mach-lpc32xx/Kconfig"
> +>>>>>>> ARM: remove ks8695 platform
>
> source "arch/arm/mach-mediatek/Kconfig"
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 85710e078afb..2496f1c89b88 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -509,13 +509,6 @@ choice
> Say Y here if you want the debug print routines to direct
> their output to UART1 serial port on KEYSTONE2 devices.
>
> - config DEBUG_KS8695_UART
> - bool "KS8695 Debug UART"
> - depends on ARCH_KS8695
> - help
> - Say Y here if you want kernel low-level debugging support
> - on KS8695.
> -
> config DEBUG_LPC18XX_UART0
> bool "Kernel low-level debugging via LPC18xx/43xx UART0"
> depends on ARCH_LPC18XX
> @@ -1533,7 +1526,6 @@ config DEBUG_LL_INCLUDE
> DEBUG_IMX6SX_UART || \
> DEBUG_IMX6UL_UART || \
> DEBUG_IMX7D_UART
> - default "debug/ks8695.S" if DEBUG_KS8695_UART
> default "debug/msm.S" if DEBUG_QCOM_UARTDM
> default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
> default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index c3624ca6c0bc..c9daa4adc6fd 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -178,7 +178,6 @@ machine-$(CONFIG_ARCH_IOP32X) += iop32x
> machine-$(CONFIG_ARCH_IOP33X) += iop33x
> machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
> machine-$(CONFIG_ARCH_KEYSTONE) += keystone
> -machine-$(CONFIG_ARCH_KS8695) += ks8695
> machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx
> machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
> machine-$(CONFIG_ARCH_MESON) += meson
> diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig
> deleted file mode 100644
> index bcb8bda09158..000000000000
> --- a/arch/arm/configs/acs5k_defconfig
> +++ /dev/null
> @@ -1,77 +0,0 @@
> -# CONFIG_SWAP is not set
> -CONFIG_SYSVIPC=y
> -CONFIG_POSIX_MQUEUE=y
> -CONFIG_LOG_BUF_SHIFT=14
> -CONFIG_SYSFS_DEPRECATED_V2=y
> -CONFIG_BLK_DEV_INITRD=y
> -CONFIG_SLAB=y
> -CONFIG_MODULES=y
> -CONFIG_MODULE_UNLOAD=y
> -# CONFIG_BLK_DEV_BSG is not set
> -# CONFIG_IOSCHED_DEADLINE is not set
> -# CONFIG_IOSCHED_CFQ is not set
> -CONFIG_ARCH_KS8695=y
> -CONFIG_MACH_KS8695=y
> -CONFIG_MACH_DSM320=y
> -CONFIG_MACH_ACS5K=y
> -# CONFIG_ARM_THUMB is not set
> -CONFIG_PCI=y
> -CONFIG_PCI_DEBUG=y
> -CONFIG_PCCARD=y
> -CONFIG_YENTA=y
> -CONFIG_AEABI=y
> -CONFIG_ZBOOT_ROM_TEXT=0x0
> -CONFIG_ZBOOT_ROM_BSS=0x0
> -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
> -CONFIG_NET=y
> -CONFIG_PACKET=y
> -CONFIG_UNIX=y
> -CONFIG_INET=y
> -CONFIG_IP_PNP=y
> -CONFIG_IP_PNP_DHCP=y
> -# CONFIG_IPV6 is not set
> -CONFIG_MTD=y
> -CONFIG_MTD_BLOCK=y
> -CONFIG_MTD_CFI=y
> -CONFIG_MTD_JEDECPROBE=y
> -CONFIG_MTD_CFI_ADV_OPTIONS=y
> -CONFIG_MTD_CFI_INTELEXT=y
> -CONFIG_MTD_CFI_AMDSTD=y
> -CONFIG_MTD_PHYSMAP=y
> -CONFIG_BLK_DEV_RAM=y
> -CONFIG_BLK_DEV_RAM_SIZE=8192
> -CONFIG_NETDEVICES=y
> -CONFIG_NET_ETHERNET=y
> -CONFIG_ARM_KS8695_ETHER=y
> -CONFIG_PRISM54=m
> -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> -# CONFIG_INPUT_KEYBOARD is not set
> -# CONFIG_INPUT_MOUSE is not set
> -# CONFIG_SERIO is not set
> -CONFIG_SERIAL_KS8695=y
> -CONFIG_SERIAL_KS8695_CONSOLE=y
> -CONFIG_I2C=y
> -CONFIG_I2C_CHARDEV=y
> -CONFIG_I2C_GPIO=y
> -CONFIG_GPIO_SYSFS=y
> -CONFIG_GPIO_PCA953X=y
> -CONFIG_WATCHDOG=y
> -CONFIG_KS8695_WATCHDOG=y
> -# CONFIG_VGA_CONSOLE is not set
> -CONFIG_RTC_CLASS=y
> -CONFIG_RTC_DRV_PCF8563=y
> -CONFIG_EXT2_FS=y
> -CONFIG_TMPFS=y
> -CONFIG_JFFS2_FS=y
> -CONFIG_JFFS2_SUMMARY=y
> -CONFIG_JFFS2_COMPRESSION_OPTIONS=y
> -CONFIG_JFFS2_RUBIN=y
> -CONFIG_CRAMFS=y
> -CONFIG_NFS_FS=y
> -CONFIG_NFS_V3=y
> -CONFIG_ROOT_NFS=y
> -CONFIG_DEBUG_KERNEL=y
> -CONFIG_DEBUG_MUTEXES=y
> -# CONFIG_FTRACE is not set
> -CONFIG_DEBUG_USER=y
> -CONFIG_DEBUG_LL=y
> diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig
> deleted file mode 100644
> index e802cdebfd0b..000000000000
> --- a/arch/arm/configs/acs5k_tiny_defconfig
> +++ /dev/null
> @@ -1,69 +0,0 @@
> -# CONFIG_SWAP is not set
> -CONFIG_SYSVIPC=y
> -CONFIG_POSIX_MQUEUE=y
> -CONFIG_LOG_BUF_SHIFT=14
> -CONFIG_SYSFS_DEPRECATED_V2=y
> -CONFIG_SLAB=y
> -CONFIG_MODULES=y
> -CONFIG_MODULE_UNLOAD=y
> -# CONFIG_BLK_DEV_BSG is not set
> -# CONFIG_IOSCHED_DEADLINE is not set
> -# CONFIG_IOSCHED_CFQ is not set
> -CONFIG_ARCH_KS8695=y
> -CONFIG_MACH_ACS5K=y
> -# CONFIG_ARM_THUMB is not set
> -CONFIG_AEABI=y
> -CONFIG_ZBOOT_ROM_TEXT=0x0
> -CONFIG_ZBOOT_ROM_BSS=0x0
> -CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh"
> -CONFIG_FPE_NWFPE=y
> -CONFIG_NET=y
> -CONFIG_PACKET=y
> -CONFIG_UNIX=y
> -CONFIG_INET=y
> -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> -# CONFIG_INET_XFRM_MODE_TUNNEL is not set
> -# CONFIG_INET_XFRM_MODE_BEET is not set
> -# CONFIG_IPV6 is not set
> -CONFIG_MTD=y
> -CONFIG_MTD_BLOCK=y
> -CONFIG_MTD_CFI=y
> -CONFIG_MTD_JEDECPROBE=y
> -CONFIG_MTD_CFI_ADV_OPTIONS=y
> -CONFIG_MTD_CFI_INTELEXT=y
> -CONFIG_MTD_CFI_AMDSTD=y
> -CONFIG_MTD_PHYSMAP=y
> -# CONFIG_BLK_DEV is not set
> -CONFIG_NETDEVICES=y
> -CONFIG_NET_ETHERNET=y
> -CONFIG_ARM_KS8695_ETHER=y
> -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> -# CONFIG_INPUT_KEYBOARD is not set
> -# CONFIG_INPUT_MOUSE is not set
> -# CONFIG_SERIO is not set
> -CONFIG_SERIAL_KS8695=y
> -CONFIG_SERIAL_KS8695_CONSOLE=y
> -# CONFIG_HW_RANDOM is not set
> -CONFIG_I2C=y
> -CONFIG_I2C_CHARDEV=y
> -CONFIG_I2C_GPIO=y
> -CONFIG_GPIO_SYSFS=y
> -CONFIG_GPIO_PCA953X=y
> -# CONFIG_HWMON is not set
> -CONFIG_WATCHDOG=y
> -CONFIG_KS8695_WATCHDOG=y
> -# CONFIG_VGA_CONSOLE is not set
> -# CONFIG_USB_SUPPORT is not set
> -CONFIG_RTC_CLASS=y
> -CONFIG_RTC_DRV_PCF8563=y
> -CONFIG_TMPFS=y
> -CONFIG_JFFS2_FS=y
> -CONFIG_JFFS2_SUMMARY=y
> -CONFIG_JFFS2_COMPRESSION_OPTIONS=y
> -CONFIG_JFFS2_RUBIN=y
> -CONFIG_SQUASHFS=y
> -# CONFIG_NETWORK_FILESYSTEMS is not set
> -CONFIG_DEBUG_KERNEL=y
> -CONFIG_DEBUG_MUTEXES=y
> -# CONFIG_FTRACE is not set
> -CONFIG_DEBUG_USER=y
> diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig
> deleted file mode 100644
> index df62d4dfbbb7..000000000000
> --- a/arch/arm/configs/ks8695_defconfig
> +++ /dev/null
> @@ -1,67 +0,0 @@
> -# CONFIG_SWAP is not set
> -CONFIG_SYSVIPC=y
> -CONFIG_LOG_BUF_SHIFT=14
> -CONFIG_SYSFS_DEPRECATED_V2=y
> -CONFIG_BLK_DEV_INITRD=y
> -CONFIG_SLAB=y
> -CONFIG_MODULES=y
> -CONFIG_MODULE_UNLOAD=y
> -# CONFIG_BLK_DEV_BSG is not set
> -# CONFIG_IOSCHED_DEADLINE is not set
> -# CONFIG_IOSCHED_CFQ is not set
> -CONFIG_ARCH_KS8695=y
> -CONFIG_MACH_KS8695=y
> -CONFIG_MACH_DSM320=y
> -# CONFIG_ARM_THUMB is not set
> -CONFIG_PCI=y
> -CONFIG_PCI_DEBUG=y
> -CONFIG_PCCARD=y
> -CONFIG_YENTA=y
> -CONFIG_AEABI=y
> -CONFIG_ZBOOT_ROM_TEXT=0x0
> -CONFIG_ZBOOT_ROM_BSS=0x0
> -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
> -CONFIG_NET=y
> -CONFIG_PACKET=y
> -CONFIG_UNIX=y
> -CONFIG_INET=y
> -CONFIG_IP_PNP=y
> -CONFIG_IP_PNP_DHCP=y
> -# CONFIG_IPV6 is not set
> -CONFIG_MTD=y
> -CONFIG_MTD_REDBOOT_PARTS=y
> -CONFIG_MTD_CMDLINE_PARTS=y
> -CONFIG_MTD_BLOCK=y
> -CONFIG_MTD_CFI=y
> -CONFIG_MTD_JEDECPROBE=y
> -CONFIG_MTD_CFI_INTELEXT=y
> -CONFIG_MTD_PHYSMAP=y
> -CONFIG_BLK_DEV_RAM=y
> -CONFIG_BLK_DEV_RAM_SIZE=8192
> -CONFIG_NETDEVICES=y
> -CONFIG_NET_ETHERNET=y
> -CONFIG_MII=y
> -CONFIG_PRISM54=m
> -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> -# CONFIG_INPUT_KEYBOARD is not set
> -# CONFIG_INPUT_MOUSE is not set
> -# CONFIG_SERIO is not set
> -CONFIG_SERIAL_KS8695=y
> -CONFIG_SERIAL_KS8695_CONSOLE=y
> -# CONFIG_HWMON is not set
> -# CONFIG_VGA_CONSOLE is not set
> -CONFIG_EXT2_FS=y
> -CONFIG_TMPFS=y
> -CONFIG_JFFS2_FS=y
> -CONFIG_JFFS2_SUMMARY=y
> -CONFIG_JFFS2_COMPRESSION_OPTIONS=y
> -CONFIG_JFFS2_RUBIN=y
> -CONFIG_CRAMFS=y
> -CONFIG_NFS_FS=y
> -CONFIG_NFS_V3=y
> -CONFIG_ROOT_NFS=y
> -CONFIG_DEBUG_KERNEL=y
> -CONFIG_DEBUG_MUTEXES=y
> -# CONFIG_FTRACE is not set
> -CONFIG_DEBUG_USER=y
> -CONFIG_DEBUG_LL=y
> diff --git a/arch/arm/include/debug/ks8695.S b/arch/arm/include/debug/ks8695.S
> deleted file mode 100644
> index eb4d371b5eea..000000000000
> --- a/arch/arm/include/debug/ks8695.S
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/include/debug/ks8695.S
> - *
> - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
> - * Copyright (C) 2006 Simtec Electronics
> - *
> - * KS8695 - Debug macros
> - */
> -
> -#define KS8695_UART_PA 0x03ffe000
> -#define KS8695_UART_VA 0xf00fe000
> -#define KS8695_URTH (0x04)
> -#define KS8695_URLS (0x14)
> -#define URLS_URTE (1 << 6)
> -#define URLS_URTHRE (1 << 5)
> -
> - .macro addruart, rp, rv, tmp
> - ldr \rp, =KS8695_UART_PA @ physical base address
> - ldr \rv, =KS8695_UART_VA @ virtual base address
> - .endm
> -
> - .macro senduart, rd, rx
> - str \rd, [\rx, #KS8695_URTH] @ Write to Transmit Holding Register
> - .endm
> -
> - .macro busyuart, rd, rx
> -1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
> - tst \rd, #URLS_URTE @ Holding & Shift registers empty?
> - beq 1001b
> - .endm
> -
> - .macro waituart, rd, rx
> -1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
> - tst \rd, #URLS_URTHRE @ Holding Register empty?
> - beq 1001b
> - .endm
> diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
> deleted file mode 100644
> index 724d7d039f74..000000000000
> --- a/arch/arm/mach-ks8695/Kconfig
> +++ /dev/null
> @@ -1,88 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-only
> -if ARCH_KS8695
> -
> -menu "Kendin/Micrel KS8695 Implementations"
> -
> -config MACH_KS8695
> - bool "KS8695 development board"
> - select HAVE_PCI
> - help
> - Say 'Y' here if you want your kernel to run on the original
> - Kendin-Micrel KS8695 development board.
> -
> -config MACH_DSM320
> - bool "DSM-320 Wireless Media Player"
> - help
> - Say 'Y' here if you want your kernel to run on the D-Link
> - DSM-320 Wireless Media Player.
> -
> -config MACH_ACS5K
> - bool "Brivo Systems LLC, ACS-5000 Master board"
> - help
> - say 'Y' here if you want your kernel to run on the Brivo
> - Systems LLC, ACS-5000 Master board.
> -
> -config MACH_LITE300
> - bool "SecureComputing SG300"
> - help
> - Say 'Y' here if you want your kernel to support the
> - SecureComputing / SnapGear SG300 VPN Internet Router.
> - See http://www.securecomputing.com for more details.
> -
> -config MACH_SG310
> - bool "McAfee SG310"
> - help
> - Say 'Y' here if you want your kernel to support the
> - McAfee / SnapGear SG310 VPN Internet Router.
> - See http://www.mcafee.com for more details.
> -
> -config MACH_SE4200
> - bool "SecureComputing SE4200"
> - help
> - Say 'Y' here if you want your kernel to support the
> - SecureComputing / SnapGear SE4200 Secure Wireless VPN
> - Internet Router.
> - See http://www.securecomputing.com for more details.
> -
> -config MACH_CM4002
> - bool "OpenGear CM4002"
> - help
> - Say 'Y' here if you want your kernel to support the OpenGear
> - CM4002 Secure Access Server. See http://www.opengear.com for
> - more details.
> -
> -config MACH_CM4008
> - bool "OpenGear CM4008"
> - select HAVE_PCI
> - help
> - Say 'Y' here if you want your kernel to support the OpenGear
> - CM4008 Console Server. See http://www.opengear.com for more
> - details.
> -
> -config MACH_CM41xx
> - bool "OpenGear CM41xx"
> - select HAVE_PCI
> - help
> - Say 'Y' here if you want your kernel to support the OpenGear
> - CM4016 or CM4048 Console Servers. See http://www.opengear.com for
> - more details.
> -
> -config MACH_IM4004
> - bool "OpenGear IM4004"
> - select HAVE_PCI
> - help
> - Say 'Y' here if you want your kernel to support the OpenGear
> - IM4004 Secure Access Server. See http://www.opengear.com for
> - more details.
> -
> -config MACH_IM42xx
> - bool "OpenGear IM42xx"
> - select HAVE_PCI
> - help
> - Say 'Y' here if you want your kernel to support the OpenGear
> - IM4216 or IM4248 Console Servers. See http://www.opengear.com for
> - more details.
> -
> -endmenu
> -
> -endif
> diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
> deleted file mode 100644
> index 439b22255a32..000000000000
> --- a/arch/arm/mach-ks8695/Makefile
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0
> -# arch/arm/mach-ks8695/Makefile
> -#
> -# Makefile for KS8695 architecture support
> -#
> -
> -obj-y := cpu.o irq.o time.o devices.o
> -
> -# PCI support is optional
> -obj-$(CONFIG_PCI) += pci.o
> -
> -# Board-specific support
> -obj-$(CONFIG_MACH_KS8695) += board-micrel.o
> -obj-$(CONFIG_MACH_DSM320) += board-dsm320.o
> -obj-$(CONFIG_MACH_ACS5K) += board-acs5k.o
> -obj-$(CONFIG_MACH_LITE300) += board-sg.o
> -obj-$(CONFIG_MACH_SG310) += board-sg.o
> -obj-$(CONFIG_MACH_SE4200) += board-sg.o
> -obj-$(CONFIG_MACH_CM4002) += board-og.o
> -obj-$(CONFIG_MACH_CM4008) += board-og.o
> -obj-$(CONFIG_MACH_CM41xx) += board-og.o
> -obj-$(CONFIG_MACH_IM4004) += board-og.o
> -obj-$(CONFIG_MACH_IM42xx) += board-og.o
> diff --git a/arch/arm/mach-ks8695/Makefile.boot b/arch/arm/mach-ks8695/Makefile.boot
> deleted file mode 100644
> index cf32eb605bd8..000000000000
> --- a/arch/arm/mach-ks8695/Makefile.boot
> +++ /dev/null
> @@ -1,9 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-only
> -# Note: the following conditions must always be true:
> -# ZRELADDR == virt_to_phys(TEXTADDR)
> -# PARAMS_PHYS must be within 4MB of ZRELADDR
> -# INITRD_PHYS must be in RAM
> -
> - zreladdr-y += 0x00008000
> -params_phys-y := 0x00000100
> -initrd_phys-y := 0x00800000
> diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
> deleted file mode 100644
> index f319258d1226..000000000000
> --- a/arch/arm/mach-ks8695/board-acs5k.c
> +++ /dev/null
> @@ -1,238 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * arch/arm/mach-ks8695/board-acs5k.c
> - *
> - * Brivo Systems LLC, ACS-5000 Master Board
> - *
> - * Copyright 2008 Simtec Electronics
> - * Daniel Silverstone <dsilvers@simtec.co.uk>
> - */
> -#include <linux/gpio.h>
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -#include <linux/interrupt.h>
> -#include <linux/init.h>
> -#include <linux/platform_device.h>
> -#include <linux/gpio/machine.h>
> -#include <linux/i2c.h>
> -#include <linux/i2c-algo-bit.h>
> -#include <linux/platform_data/i2c-gpio.h>
> -#include <linux/platform_data/pca953x.h>
> -
> -#include <linux/mtd/mtd.h>
> -#include <linux/mtd/map.h>
> -#include <linux/mtd/physmap.h>
> -#include <linux/mtd/partitions.h>
> -
> -#include <asm/mach-types.h>
> -
> -#include <asm/mach/arch.h>
> -#include <asm/mach/map.h>
> -#include <asm/mach/irq.h>
> -
> -#include "devices.h"
> -#include <mach/gpio-ks8695.h>
> -
> -#include "generic.h"
> -
> -static struct gpiod_lookup_table acs5k_i2c_gpiod_table = {
> - .dev_id = "i2c-gpio",
> - .table = {
> - GPIO_LOOKUP_IDX("KS8695", 4, NULL, 0,
> - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
> - GPIO_LOOKUP_IDX("KS8695", 5, NULL, 1,
> - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
> - },
> -};
> -
> -static struct i2c_gpio_platform_data acs5k_i2c_device_platdata = {
> - .udelay = 10,
> -};
> -
> -static struct platform_device acs5k_i2c_device = {
> - .name = "i2c-gpio",
> - .id = -1,
> - .num_resources = 0,
> - .resource = NULL,
> - .dev = {
> - .platform_data = &acs5k_i2c_device_platdata,
> - },
> -};
> -
> -static int acs5k_pca9555_setup(struct i2c_client *client,
> - unsigned gpio_base, unsigned ngpio,
> - void *context)
> -{
> - static int acs5k_gpio_value[] = {
> - -1, -1, -1, -1, -1, -1, -1, 0, 1, 1, -1, 0, 1, 0, -1, -1
> - };
> - int n;
> -
> - for (n = 0; n < ARRAY_SIZE(acs5k_gpio_value); ++n) {
> - gpio_request(gpio_base + n, "ACS-5000 GPIO Expander");
> - if (acs5k_gpio_value[n] < 0)
> - gpio_direction_input(gpio_base + n);
> - else
> - gpio_direction_output(gpio_base + n,
> - acs5k_gpio_value[n]);
> - gpio_export(gpio_base + n, 0); /* Export, direction locked down */
> - }
> -
> - return 0;
> -}
> -
> -static struct pca953x_platform_data acs5k_i2c_pca9555_platdata = {
> - .gpio_base = 16, /* Start directly after the CPU's GPIO */
> - .invert = 0, /* Do not invert */
> - .setup = acs5k_pca9555_setup,
> -};
> -
> -static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
> - {
> - I2C_BOARD_INFO("pcf8563", 0x51),
> - },
> - {
> - I2C_BOARD_INFO("pca9555", 0x20),
> - .platform_data = &acs5k_i2c_pca9555_platdata,
> - },
> -};
> -
> -static void __init acs5k_i2c_init(void)
> -{
> - /* The gpio interface */
> - gpiod_add_lookup_table(&acs5k_i2c_gpiod_table);
> - platform_device_register(&acs5k_i2c_device);
> - /* I2C devices */
> - i2c_register_board_info(0, acs5k_i2c_devs,
> - ARRAY_SIZE(acs5k_i2c_devs));
> -}
> -
> -static struct mtd_partition acs5k_nor_partitions[] = {
> - [0] = {
> - .name = "Boot Agent and config",
> - .size = SZ_256K,
> - .offset = 0,
> - .mask_flags = MTD_WRITEABLE,
> - },
> - [1] = {
> - .name = "Kernel",
> - .size = SZ_1M,
> - .offset = SZ_256K,
> - },
> - [2] = {
> - .name = "SquashFS1",
> - .size = SZ_2M,
> - .offset = SZ_256K + SZ_1M,
> - },
> - [3] = {
> - .name = "SquashFS2",
> - .size = SZ_4M + SZ_2M,
> - .offset = SZ_256K + SZ_1M + SZ_2M,
> - },
> - [4] = {
> - .name = "Data",
> - .size = SZ_16M + SZ_4M + SZ_2M + SZ_512K, /* 22.5 MB */
> - .offset = SZ_256K + SZ_8M + SZ_1M,
> - }
> -};
> -
> -static struct physmap_flash_data acs5k_nor_pdata = {
> - .width = 4,
> - .nr_parts = ARRAY_SIZE(acs5k_nor_partitions),
> - .parts = acs5k_nor_partitions,
> -};
> -
> -static struct resource acs5k_nor_resource[] = {
> - [0] = {
> - .start = SZ_32M, /* We expect the bootloader to map
> - * the flash here.
> - */
> - .end = SZ_32M + SZ_16M - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = SZ_32M + SZ_16M,
> - .end = SZ_32M + SZ_32M - SZ_256K - 1,
> - .flags = IORESOURCE_MEM,
> - }
> -};
> -
> -static struct platform_device acs5k_device_nor = {
> - .name = "physmap-flash",
> - .id = -1,
> - .num_resources = ARRAY_SIZE(acs5k_nor_resource),
> - .resource = acs5k_nor_resource,
> - .dev = {
> - .platform_data = &acs5k_nor_pdata,
> - },
> -};
> -
> -static void __init acs5k_register_nor(void)
> -{
> - int ret;
> -
> - if (acs5k_nor_partitions[0].mask_flags == 0)
> - printk(KERN_WARNING "Warning: Unprotecting bootloader and configuration partition\n");
> -
> - ret = platform_device_register(&acs5k_device_nor);
> - if (ret < 0)
> - printk(KERN_ERR "failed to register physmap-flash device\n");
> -}
> -
> -static int __init acs5k_protection_setup(char *s)
> -{
> - /* We can't allocate anything here but we should be able
> - * to trivially parse s and decide if we can protect the
> - * bootloader partition or not
> - */
> - if (strcmp(s, "no") == 0)
> - acs5k_nor_partitions[0].mask_flags = 0;
> -
> - return 1;
> -}
> -
> -__setup("protect_bootloader=", acs5k_protection_setup);
> -
> -static void __init acs5k_init_gpio(void)
> -{
> - int i;
> -
> - ks8695_register_gpios();
> - for (i = 0; i < 4; ++i)
> - gpio_request(i, "ACS5K IRQ");
> - gpio_request(7, "ACS5K KS_FRDY");
> - for (i = 8; i < 16; ++i)
> - gpio_request(i, "ACS5K Unused");
> -
> - gpio_request(3, "ACS5K CAN Control");
> - gpio_request(6, "ACS5K Heartbeat");
> - gpio_direction_output(3, 1); /* Default CAN_RESET high */
> - gpio_direction_output(6, 0); /* Default KS8695_ACTIVE low */
> - gpio_export(3, 0); /* export CAN_RESET as output only */
> - gpio_export(6, 0); /* export KS8695_ACTIVE as output only */
> -}
> -
> -static void __init acs5k_init(void)
> -{
> - acs5k_init_gpio();
> -
> - /* Network device */
> - ks8695_add_device_lan(); /* eth0 = LAN */
> - ks8695_add_device_wan(); /* ethX = WAN */
> -
> - /* NOR devices */
> - acs5k_register_nor();
> -
> - /* I2C bus */
> - acs5k_i2c_init();
> -}
> -
> -MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
> - /* Maintainer: Simtec Electronics. */
> - .atag_offset = 0x100,
> - .map_io = ks8695_map_io,
> - .init_irq = ks8695_init_irq,
> - .init_machine = acs5k_init,
> - .init_time = ks8695_timer_init,
> - .restart = ks8695_restart,
> -MACHINE_END
> diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
> deleted file mode 100644
> index d5f435cae6e0..000000000000
> --- a/arch/arm/mach-ks8695/board-dsm320.c
> +++ /dev/null
> @@ -1,127 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * arch/arm/mach-ks8695/board-dsm320.c
> - *
> - * DSM-320 D-Link Wireless Media Player, board support.
> - *
> - * Copyright 2008 Simtec Electronics
> - * Daniel Silverstone <dsilvers@simtec.co.uk>
> - */
> -#include <linux/gpio.h>
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -#include <linux/interrupt.h>
> -#include <linux/init.h>
> -#include <linux/platform_device.h>
> -
> -#include <linux/mtd/mtd.h>
> -#include <linux/mtd/map.h>
> -#include <linux/mtd/physmap.h>
> -#include <linux/mtd/partitions.h>
> -
> -#include <asm/mach-types.h>
> -
> -#include <asm/mach/arch.h>
> -#include <asm/mach/map.h>
> -#include <asm/mach/irq.h>
> -
> -#include "devices.h"
> -#include <mach/gpio-ks8695.h>
> -
> -#include "generic.h"
> -
> -#ifdef CONFIG_PCI
> -static int dsm320_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> -{
> - switch (slot) {
> - case 0:
> - /* PCI-AHB bridge? */
> - return KS8695_IRQ_EXTERN0;
> - case 18:
> - /* Mini PCI slot */
> - return KS8695_IRQ_EXTERN2;
> - case 20:
> - /* RealMAGIC chip */
> - return KS8695_IRQ_EXTERN0;
> - }
> - BUG();
> -}
> -
> -static struct ks8695_pci_cfg __initdata dsm320_pci = {
> - .mode = KS8695_MODE_MINIPCI,
> - .map_irq = dsm320_pci_map_irq,
> -};
> -
> -static void __init dsm320_register_pci(void)
> -{
> - /* Initialise the GPIO lines for interrupt mode */
> - /* RealMAGIC */
> - ks8695_gpio_interrupt(KS8695_GPIO_0, IRQ_TYPE_LEVEL_LOW);
> - /* MiniPCI Slot */
> - ks8695_gpio_interrupt(KS8695_GPIO_2, IRQ_TYPE_LEVEL_LOW);
> -
> - ks8695_init_pci(&dsm320_pci);
> -}
> -
> -#else
> -static inline void __init dsm320_register_pci(void) { }
> -#endif
> -
> -static struct physmap_flash_data dsm320_nor_pdata = {
> - .width = 4,
> - .nr_parts = 0,
> -};
> -
> -static struct resource dsm320_nor_resource[] = {
> - [0] = {
> - .start = SZ_32M, /* We expect the bootloader to map
> - * the flash here.
> - */
> - .end = SZ_32M + SZ_4M - 1,
> - .flags = IORESOURCE_MEM,
> - }
> -};
> -
> -static struct platform_device dsm320_device_nor = {
> - .name = "physmap-flash",
> - .id = -1,
> - .num_resources = ARRAY_SIZE(dsm320_nor_resource),
> - .resource = dsm320_nor_resource,
> - .dev = {
> - .platform_data = &dsm320_nor_pdata,
> - },
> -};
> -
> -void __init dsm320_register_nor(void)
> -{
> - int ret;
> -
> - ret = platform_device_register(&dsm320_device_nor);
> - if (ret < 0)
> - printk(KERN_ERR "failed to register physmap-flash device\n");
> -}
> -
> -static void __init dsm320_init(void)
> -{
> - /* GPIO registration */
> - ks8695_register_gpios();
> -
> - /* PCI registration */
> - dsm320_register_pci();
> -
> - /* Network device */
> - ks8695_add_device_lan(); /* eth0 = LAN */
> -
> - /* NOR devices */
> - dsm320_register_nor();
> -}
> -
> -MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
> - /* Maintainer: Simtec Electronics. */
> - .atag_offset = 0x100,
> - .map_io = ks8695_map_io,
> - .init_irq = ks8695_init_irq,
> - .init_machine = dsm320_init,
> - .init_time = ks8695_timer_init,
> - .restart = ks8695_restart,
> -MACHINE_END
> diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
> deleted file mode 100644
> index bf8856ce3fbb..000000000000
> --- a/arch/arm/mach-ks8695/board-micrel.c
> +++ /dev/null
> @@ -1,59 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * arch/arm/mach-ks8695/board-micrel.c
> - */
> -#include <linux/gpio.h>
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -#include <linux/interrupt.h>
> -#include <linux/init.h>
> -#include <linux/platform_device.h>
> -
> -#include <asm/mach-types.h>
> -
> -#include <asm/mach/arch.h>
> -#include <asm/mach/map.h>
> -#include <asm/mach/irq.h>
> -
> -#include <mach/gpio-ks8695.h>
> -#include "devices.h"
> -
> -#include "generic.h"
> -
> -#ifdef CONFIG_PCI
> -static int micrel_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> -{
> - return KS8695_IRQ_EXTERN0;
> -}
> -
> -static struct ks8695_pci_cfg __initdata micrel_pci = {
> - .mode = KS8695_MODE_MINIPCI,
> - .map_irq = micrel_pci_map_irq,
> -};
> -#endif
> -
> -
> -static void __init micrel_init(void)
> -{
> - printk(KERN_INFO "Micrel KS8695 Development Board initializing\n");
> -
> - ks8695_register_gpios();
> -
> -#ifdef CONFIG_PCI
> - ks8695_init_pci(&micrel_pci);
> -#endif
> -
> - /* Add devices */
> - ks8695_add_device_wan(); /* eth0 = WAN */
> - ks8695_add_device_lan(); /* eth1 = LAN */
> -}
> -
> -MACHINE_START(KS8695, "KS8695 Centaur Development Board")
> - /* Maintainer: Micrel Semiconductor Inc. */
> - .atag_offset = 0x100,
> - .map_io = ks8695_map_io,
> - .init_irq = ks8695_init_irq,
> - .init_machine = micrel_init,
> - .init_time = ks8695_timer_init,
> - .restart = ks8695_restart,
> -MACHINE_END
> diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c
> deleted file mode 100644
> index 12ffe9227f9c..000000000000
> --- a/arch/arm/mach-ks8695/board-og.c
> +++ /dev/null
> @@ -1,197 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * board-og.c -- support for the OpenGear KS8695 based boards.
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -#include <linux/interrupt.h>
> -#include <linux/init.h>
> -#include <linux/delay.h>
> -#include <linux/platform_device.h>
> -#include <linux/serial_8250.h>
> -#include <linux/gpio.h>
> -#include <linux/irq.h>
> -#include <asm/mach-types.h>
> -#include <asm/mach/arch.h>
> -#include <asm/mach/map.h>
> -#include "devices.h"
> -#include <mach/regs-gpio.h>
> -#include <mach/gpio-ks8695.h>
> -#include "generic.h"
> -
> -static int og_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> -{
> - if (machine_is_im4004() && (slot == 8))
> - return KS8695_IRQ_EXTERN1;
> - return KS8695_IRQ_EXTERN0;
> -}
> -
> -static struct ks8695_pci_cfg __initdata og_pci = {
> - .mode = KS8695_MODE_PCI,
> - .map_irq = og_pci_map_irq,
> -};
> -
> -static void __init og_register_pci(void)
> -{
> - /* Initialize the GPIO lines for interrupt mode */
> - ks8695_gpio_interrupt(KS8695_GPIO_0, IRQ_TYPE_LEVEL_LOW);
> -
> - /* Cardbus Slot */
> - if (machine_is_im4004())
> - ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW);
> -
> - if (IS_ENABLED(CONFIG_PCI))
> - ks8695_init_pci(&og_pci);
> -}
> -
> -/*
> - * The PCI bus reset is driven by a dedicated GPIO line. Toggle it here
> - * and bring the PCI bus out of reset.
> - */
> -static void __init og_pci_bus_reset(void)
> -{
> - unsigned int rstline = 1;
> -
> - /* Some boards use a different GPIO as the PCI reset line */
> - if (machine_is_im4004())
> - rstline = 2;
> - else if (machine_is_im42xx())
> - rstline = 0;
> -
> - gpio_request(rstline, "PCI reset");
> - gpio_direction_output(rstline, 0);
> -
> - /* Drive a reset on the PCI reset line */
> - gpio_set_value(rstline, 1);
> - gpio_set_value(rstline, 0);
> - mdelay(100);
> - gpio_set_value(rstline, 1);
> - mdelay(100);
> -}
> -
> -/*
> - * Direct connect serial ports (non-PCI that is).
> - */
> -#define S8250_PHYS 0x03800000
> -#define S8250_VIRT 0xf4000000
> -#define S8250_SIZE 0x00100000
> -
> -static struct map_desc og_io_desc[] __initdata = {
> - {
> - .virtual = S8250_VIRT,
> - .pfn = __phys_to_pfn(S8250_PHYS),
> - .length = S8250_SIZE,
> - .type = MT_DEVICE,
> - }
> -};
> -
> -static struct resource og_uart_resources[] = {
> - {
> - .start = S8250_VIRT,
> - .end = S8250_VIRT + S8250_SIZE,
> - .flags = IORESOURCE_MEM
> - },
> -};
> -
> -static struct plat_serial8250_port og_uart_data[] = {
> - {
> - .mapbase = S8250_VIRT,
> - .membase = (char *) S8250_VIRT,
> - .irq = 3,
> - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
> - .iotype = UPIO_MEM,
> - .regshift = 2,
> - .uartclk = 115200 * 16,
> - },
> - { },
> -};
> -
> -static struct platform_device og_uart = {
> - .name = "serial8250",
> - .id = 0,
> - .dev.platform_data = og_uart_data,
> - .num_resources = 1,
> - .resource = og_uart_resources
> -};
> -
> -static struct platform_device *og_devices[] __initdata = {
> - &og_uart
> -};
> -
> -static void __init og_init(void)
> -{
> - ks8695_register_gpios();
> -
> - if (machine_is_cm4002()) {
> - ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_HIGH);
> - iotable_init(og_io_desc, ARRAY_SIZE(og_io_desc));
> - platform_add_devices(og_devices, ARRAY_SIZE(og_devices));
> - } else {
> - og_pci_bus_reset();
> - og_register_pci();
> - }
> -
> - ks8695_add_device_lan();
> - ks8695_add_device_wan();
> -}
> -
> -#ifdef CONFIG_MACH_CM4002
> -MACHINE_START(CM4002, "OpenGear/CM4002")
> - /* OpenGear Inc. */
> - .atag_offset = 0x100,
> - .map_io = ks8695_map_io,
> - .init_irq = ks8695_init_irq,
> - .init_machine = og_init,
> - .init_time = ks8695_timer_init,
> - .restart = ks8695_restart,
> -MACHINE_END
> -#endif
> -
> -#ifdef CONFIG_MACH_CM4008
> -MACHINE_START(CM4008, "OpenGear/CM4008")
> - /* OpenGear Inc. */
> - .atag_offset = 0x100,
> - .map_io = ks8695_map_io,
> - .init_irq = ks8695_init_irq,
> - .init_machine = og_init,
> - .init_time = ks8695_timer_init,
> - .restart = ks8695_restart,
> -MACHINE_END
> -#endif
> -
> -#ifdef CONFIG_MACH_CM41xx
> -MACHINE_START(CM41XX, "OpenGear/CM41xx")
> - /* OpenGear Inc. */
> - .atag_offset = 0x100,
> - .map_io = ks8695_map_io,
> - .init_irq = ks8695_init_irq,
> - .init_machine = og_init,
> - .init_time = ks8695_timer_init,
> - .restart = ks8695_restart,
> -MACHINE_END
> -#endif
> -
> -#ifdef CONFIG_MACH_IM4004
> -MACHINE_START(IM4004, "OpenGear/IM4004")
> - /* OpenGear Inc. */
> - .atag_offset = 0x100,
> - .map_io = ks8695_map_io,
> - .init_irq = ks8695_init_irq,
> - .init_machine = og_init,
> - .init_time = ks8695_timer_init,
> - .restart = ks8695_restart,
> -MACHINE_END
> -#endif
> -
> -#ifdef CONFIG_MACH_IM42xx
> -MACHINE_START(IM42XX, "OpenGear/IM42xx")
> - /* OpenGear Inc. */
> - .atag_offset = 0x100,
> - .map_io = ks8695_map_io,
> - .init_irq = ks8695_init_irq,
> - .init_machine = og_init,
> - .init_time = ks8695_timer_init,
> - .restart = ks8695_restart,
> -MACHINE_END
> -#endif
> diff --git a/arch/arm/mach-ks8695/board-sg.c b/arch/arm/mach-ks8695/board-sg.c
> deleted file mode 100644
> index d5ec85a56375..000000000000
> --- a/arch/arm/mach-ks8695/board-sg.c
> +++ /dev/null
> @@ -1,118 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * board-sg.c -- support for the SnapGear KS8695 based boards
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/types.h>
> -#include <linux/init.h>
> -#include <linux/platform_device.h>
> -#include <linux/mtd/mtd.h>
> -#include <linux/mtd/map.h>
> -#include <linux/mtd/physmap.h>
> -#include <linux/mtd/partitions.h>
> -#include <asm/mach-types.h>
> -#include <asm/mach/arch.h>
> -#include "devices.h"
> -#include "generic.h"
> -
> -/*
> - * The SG310 machine type is fitted with a conventional 8MB Strataflash
> - * device. Define its partitioning.
> - */
> -#define FL_BASE 0x02000000
> -#define FL_SIZE SZ_8M
> -
> -static struct mtd_partition sg_mtd_partitions[] = {
> - [0] = {
> - .name = "SnapGear Boot Loader",
> - .size = SZ_128K,
> - },
> - [1] = {
> - .name = "SnapGear non-volatile configuration",
> - .size = SZ_512K,
> - .offset = SZ_256K,
> - },
> - [2] = {
> - .name = "SnapGear image",
> - .offset = SZ_512K + SZ_256K,
> - },
> - [3] = {
> - .name = "SnapGear StrataFlash",
> - },
> - [4] = {
> - .name = "SnapGear Boot Tags",
> - .size = SZ_128K,
> - .offset = SZ_128K,
> - },
> -};
> -
> -static struct physmap_flash_data sg_mtd_pdata = {
> - .width = 1,
> - .nr_parts = ARRAY_SIZE(sg_mtd_partitions),
> - .parts = sg_mtd_partitions,
> -};
> -
> -
> -static struct resource sg_mtd_resource[] = {
> - [0] = {
> - .start = FL_BASE,
> - .end = FL_BASE + FL_SIZE - 1,
> - .flags = IORESOURCE_MEM,
> - },
> -};
> -
> -static struct platform_device sg_mtd_device = {
> - .name = "physmap-flash",
> - .id = 0,
> - .num_resources = ARRAY_SIZE(sg_mtd_resource),
> - .resource = sg_mtd_resource,
> - .dev = {
> - .platform_data = &sg_mtd_pdata,
> - },
> -};
> -
> -static void __init sg_init(void)
> -{
> - ks8695_add_device_lan();
> - ks8695_add_device_wan();
> -
> - if (machine_is_sg310())
> - platform_device_register(&sg_mtd_device);
> -}
> -
> -#ifdef CONFIG_MACH_LITE300
> -MACHINE_START(LITE300, "SecureComputing/SG300")
> - /* SnapGear */
> - .atag_offset = 0x100,
> - .map_io = ks8695_map_io,
> - .init_irq = ks8695_init_irq,
> - .init_machine = sg_init,
> - .init_time = ks8695_timer_init,
> - .restart = ks8695_restart,
> -MACHINE_END
> -#endif
> -
> -#ifdef CONFIG_MACH_SG310
> -MACHINE_START(SG310, "McAfee/SG310")
> - /* SnapGear */
> - .atag_offset = 0x100,
> - .map_io = ks8695_map_io,
> - .init_irq = ks8695_init_irq,
> - .init_machine = sg_init,
> - .init_time = ks8695_timer_init,
> - .restart = ks8695_restart,
> -MACHINE_END
> -#endif
> -
> -#ifdef CONFIG_MACH_SE4200
> -MACHINE_START(SE4200, "SecureComputing/SE4200")
> - /* SnapGear */
> - .atag_offset = 0x100,
> - .map_io = ks8695_map_io,
> - .init_irq = ks8695_init_irq,
> - .init_machine = sg_init,
> - .init_time = ks8695_timer_init,
> - .restart = ks8695_restart,
> -MACHINE_END
> -#endif
> diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
> deleted file mode 100644
> index aa6bb0c93aa8..000000000000
> --- a/arch/arm/mach-ks8695/cpu.c
> +++ /dev/null
> @@ -1,60 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * arch/arm/mach-ks8695/cpu.c
> - *
> - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
> - * Copyright (C) 2006 Simtec Electronics
> - *
> - * KS8695 CPU support
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/module.h>
> -#include <linux/init.h>
> -#include <linux/io.h>
> -
> -#include <mach/hardware.h>
> -#include <asm/mach/arch.h>
> -#include <asm/mach/map.h>
> -
> -#include "regs-sys.h"
> -#include <mach/regs-misc.h>
> -
> -
> -static struct map_desc ks8695_io_desc[] __initdata = {
> - {
> - .virtual = (unsigned long)KS8695_IO_VA,
> - .pfn = __phys_to_pfn(KS8695_IO_PA),
> - .length = KS8695_IO_SIZE,
> - .type = MT_DEVICE,
> - }
> -};
> -
> -static void __init ks8695_processor_info(void)
> -{
> - unsigned long id, rev;
> -
> - id = __raw_readl(KS8695_MISC_VA + KS8695_DID);
> - rev = __raw_readl(KS8695_MISC_VA + KS8695_RID);
> -
> - printk("KS8695 ID=%04lx SubID=%02lx Revision=%02lx\n", (id & DID_ID), (rev & RID_SUBID), (rev & RID_REVISION));
> -}
> -
> -static unsigned int sysclk[8] = { 125000000, 100000000, 62500000, 50000000, 41700000, 33300000, 31300000, 25000000 };
> -static unsigned int cpuclk[8] = { 166000000, 166000000, 83000000, 83000000, 55300000, 55300000, 41500000, 41500000 };
> -
> -static void __init ks8695_clock_info(void)
> -{
> - unsigned int scdc = __raw_readl(KS8695_SYS_VA + KS8695_CLKCON) & CLKCON_SCDC;
> -
> - printk("Clocks: System %u MHz, CPU %u MHz\n",
> - sysclk[scdc] / 1000000, cpuclk[scdc] / 1000000);
> -}
> -
> -void __init ks8695_map_io(void)
> -{
> - iotable_init(ks8695_io_desc, ARRAY_SIZE(ks8695_io_desc));
> -
> - ks8695_processor_info();
> - ks8695_clock_info();
> -}
> diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
> deleted file mode 100644
> index 61cf20beb45f..000000000000
> --- a/arch/arm/mach-ks8695/devices.c
> +++ /dev/null
> @@ -1,197 +0,0 @@
> -/*
> - * arch/arm/mach-ks8695/devices.c
> - *
> - * Copyright (C) 2006 Andrew Victor
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> - */
> -
> -#include <asm/mach/arch.h>
> -#include <asm/mach/map.h>
> -
> -#include <linux/gpio.h>
> -#include <linux/platform_device.h>
> -
> -#include <mach/irqs.h>
> -#include "regs-wan.h"
> -#include "regs-lan.h"
> -#include "regs-hpna.h"
> -#include <mach/regs-switch.h>
> -#include <mach/regs-misc.h>
> -
> -
> -/* --------------------------------------------------------------------
> - * Ethernet
> - * -------------------------------------------------------------------- */
> -
> -static u64 eth_dmamask = 0xffffffffUL;
> -
> -static struct resource ks8695_wan_resources[] = {
> - [0] = {
> - .start = KS8695_WAN_PA,
> - .end = KS8695_WAN_PA + 0x00ff,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .name = "WAN RX",
> - .start = KS8695_IRQ_WAN_RX_STATUS,
> - .end = KS8695_IRQ_WAN_RX_STATUS,
> - .flags = IORESOURCE_IRQ,
> - },
> - [2] = {
> - .name = "WAN TX",
> - .start = KS8695_IRQ_WAN_TX_STATUS,
> - .end = KS8695_IRQ_WAN_TX_STATUS,
> - .flags = IORESOURCE_IRQ,
> - },
> - [3] = {
> - .name = "WAN Link",
> - .start = KS8695_IRQ_WAN_LINK,
> - .end = KS8695_IRQ_WAN_LINK,
> - .flags = IORESOURCE_IRQ,
> - },
> - [4] = {
> - .name = "WAN PHY",
> - .start = KS8695_MISC_PA,
> - .end = KS8695_MISC_PA + 0x1f,
> - .flags = IORESOURCE_MEM,
> - },
> -};
> -
> -static struct platform_device ks8695_wan_device = {
> - .name = "ks8695_ether",
> - .id = 0,
> - .dev = {
> - .dma_mask = &eth_dmamask,
> - .coherent_dma_mask = 0xffffffff,
> - },
> - .resource = ks8695_wan_resources,
> - .num_resources = ARRAY_SIZE(ks8695_wan_resources),
> -};
> -
> -
> -static struct resource ks8695_lan_resources[] = {
> - [0] = {
> - .start = KS8695_LAN_PA,
> - .end = KS8695_LAN_PA + 0x00ff,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .name = "LAN RX",
> - .start = KS8695_IRQ_LAN_RX_STATUS,
> - .end = KS8695_IRQ_LAN_RX_STATUS,
> - .flags = IORESOURCE_IRQ,
> - },
> - [2] = {
> - .name = "LAN TX",
> - .start = KS8695_IRQ_LAN_TX_STATUS,
> - .end = KS8695_IRQ_LAN_TX_STATUS,
> - .flags = IORESOURCE_IRQ,
> - },
> - [3] = {
> - .name = "LAN SWITCH",
> - .start = KS8695_SWITCH_PA,
> - .end = KS8695_SWITCH_PA + 0x4f,
> - .flags = IORESOURCE_MEM,
> - },
> -};
> -
> -static struct platform_device ks8695_lan_device = {
> - .name = "ks8695_ether",
> - .id = 1,
> - .dev = {
> - .dma_mask = &eth_dmamask,
> - .coherent_dma_mask = 0xffffffff,
> - },
> - .resource = ks8695_lan_resources,
> - .num_resources = ARRAY_SIZE(ks8695_lan_resources),
> -};
> -
> -
> -static struct resource ks8695_hpna_resources[] = {
> - [0] = {
> - .start = KS8695_HPNA_PA,
> - .end = KS8695_HPNA_PA + 0x00ff,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .name = "HPNA RX",
> - .start = KS8695_IRQ_HPNA_RX_STATUS,
> - .end = KS8695_IRQ_HPNA_RX_STATUS,
> - .flags = IORESOURCE_IRQ,
> - },
> - [2] = {
> - .name = "HPNA TX",
> - .start = KS8695_IRQ_HPNA_TX_STATUS,
> - .end = KS8695_IRQ_HPNA_TX_STATUS,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device ks8695_hpna_device = {
> - .name = "ks8695_ether",
> - .id = 2,
> - .dev = {
> - .dma_mask = &eth_dmamask,
> - .coherent_dma_mask = 0xffffffff,
> - },
> - .resource = ks8695_hpna_resources,
> - .num_resources = ARRAY_SIZE(ks8695_hpna_resources),
> -};
> -
> -void __init ks8695_add_device_wan(void)
> -{
> - platform_device_register(&ks8695_wan_device);
> -}
> -
> -void __init ks8695_add_device_lan(void)
> -{
> - platform_device_register(&ks8695_lan_device);
> -}
> -
> -void __init ks8696_add_device_hpna(void)
> -{
> - platform_device_register(&ks8695_hpna_device);
> -}
> -
> -
> -/* --------------------------------------------------------------------
> - * Watchdog
> - * -------------------------------------------------------------------- */
> -
> -static struct platform_device ks8695_wdt_device = {
> - .name = "ks8695_wdt",
> - .id = -1,
> - .num_resources = 0,
> -};
> -
> -static void __init ks8695_add_device_watchdog(void)
> -{
> - platform_device_register(&ks8695_wdt_device);
> -}
> -
> -
> -/* -------------------------------------------------------------------- */
> -
> -/*
> - * These devices are always present and don't need any board-specific
> - * setup.
> - */
> -static int __init ks8695_add_standard_devices(void)
> -{
> - ks8695_add_device_watchdog();
> - return 0;
> -}
> -
> -arch_initcall(ks8695_add_standard_devices);
> diff --git a/arch/arm/mach-ks8695/devices.h b/arch/arm/mach-ks8695/devices.h
> deleted file mode 100644
> index cc23ee3820ea..000000000000
> --- a/arch/arm/mach-ks8695/devices.h
> +++ /dev/null
> @@ -1,29 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/mach-ks8695/include/mach/devices.h
> - *
> - * Copyright (C) 2006 Andrew Victor
> - */
> -
> -#ifndef __ASM_ARCH_DEVICES_H
> -#define __ASM_ARCH_DEVICES_H
> -
> -#include <linux/pci.h>
> -
> - /* Ethernet */
> -extern void __init ks8695_add_device_wan(void);
> -extern void __init ks8695_add_device_lan(void);
> -extern void __init ks8695_add_device_hpna(void);
> -
> - /* PCI */
> -#define KS8695_MODE_PCI 0
> -#define KS8695_MODE_MINIPCI 1
> -#define KS8695_MODE_CARDBUS 2
> -
> -struct ks8695_pci_cfg {
> - short mode;
> - int (*map_irq)(const struct pci_dev *, u8, u8);
> -};
> -extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/generic.h b/arch/arm/mach-ks8695/generic.h
> deleted file mode 100644
> index 9e9cbdd436a9..000000000000
> --- a/arch/arm/mach-ks8695/generic.h
> +++ /dev/null
> @@ -1,12 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-or-later */
> -/*
> - * arch/arm/mach-ks8695/generic.h
> - *
> - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
> - * Copyright (C) 2006 Simtec Electronics
> -*/
> -
> -extern __init void ks8695_map_io(void);
> -extern __init void ks8695_init_irq(void);
> -extern void ks8695_restart(enum reboot_mode, const char *);
> -extern void ks8695_timer_init(void);
> diff --git a/arch/arm/mach-ks8695/include/mach/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S
> deleted file mode 100644
> index 7ff812cb010b..000000000000
> --- a/arch/arm/mach-ks8695/include/mach/entry-macro.S
> +++ /dev/null
> @@ -1,47 +0,0 @@
> -/*
> - * arch/arm/mach-ks8695/include/mach/entry-macro.S
> - *
> - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
> - * Copyright (C) 2006 Simtec Electronics
> - *
> - * Low-level IRQ helper macros for KS8695
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> -*/
> -
> -#include <mach/hardware.h>
> -#include <mach/regs-irq.h>
> -
> - .macro get_irqnr_preamble, base, tmp
> - ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller
> - .endm
> -
> - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
> - ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register
> -
> - teq \irqstat, #0
> - beq 1001f
> -
> - mov \irqnr, #0
> -
> - tst \irqstat, #0xff
> - moveq \irqstat, \irqstat, lsr #8
> - addeq \irqnr, \irqnr, #8
> - tsteq \irqstat, #0xff
> - moveq \irqstat, \irqstat, lsr #8
> - addeq \irqnr, \irqnr, #8
> - tsteq \irqstat, #0xff
> - moveq \irqstat, \irqstat, lsr #8
> - addeq \irqnr, \irqnr, #8
> - tst \irqstat, #0x0f
> - moveq \irqstat, \irqstat, lsr #4
> - addeq \irqnr, \irqnr, #4
> - tst \irqstat, #0x03
> - moveq \irqstat, \irqstat, lsr #2
> - addeq \irqnr, \irqnr, #2
> - tst \irqstat, #0x01
> - addseq \irqnr, \irqnr, #1
> -1001:
> - .endm
> diff --git a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h
> deleted file mode 100644
> index 600115f48fb3..000000000000
> --- a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h
> +++ /dev/null
> @@ -1,36 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * Copyright (C) 2006 Andrew Victor
> - */
> -
> -#ifndef __MACH_KS8659_GPIO_H
> -#define __MACH_KS8659_GPIO_H
> -
> -#include <linux/kernel.h>
> -
> -#define KS8695_GPIO_0 0
> -#define KS8695_GPIO_1 1
> -#define KS8695_GPIO_2 2
> -#define KS8695_GPIO_3 3
> -#define KS8695_GPIO_4 4
> -#define KS8695_GPIO_5 5
> -#define KS8695_GPIO_6 6
> -#define KS8695_GPIO_7 7
> -#define KS8695_GPIO_8 8
> -#define KS8695_GPIO_9 9
> -#define KS8695_GPIO_10 10
> -#define KS8695_GPIO_11 11
> -#define KS8695_GPIO_12 12
> -#define KS8695_GPIO_13 13
> -#define KS8695_GPIO_14 14
> -#define KS8695_GPIO_15 15
> -
> -/*
> - * Configure GPIO pin as external interrupt source.
> - */
> -extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
> -
> -/* Register the GPIOs */
> -extern void ks8695_register_gpios(void);
> -
> -#endif /* __MACH_KS8659_GPIO_H */
> diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
> deleted file mode 100644
> index 0fb889be8112..000000000000
> --- a/arch/arm/mach-ks8695/include/mach/hardware.h
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/mach-ks8695/include/mach/hardware.h
> - *
> - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
> - * Copyright (C) 2006 Simtec Electronics
> - *
> - * KS8695 - Memory Map definitions
> -*/
> -
> -#ifndef __ASM_ARCH_HARDWARE_H
> -#define __ASM_ARCH_HARDWARE_H
> -
> -#include <linux/sizes.h>
> -
> -/*
> - * Clocks are derived from MCLK, which is 25MHz
> - */
> -#define KS8695_CLOCK_RATE 25000000
> -
> -/*
> - * Physical RAM address.
> - */
> -#define KS8695_SDRAM_PA 0x00000000
> -
> -
> -/*
> - * We map an entire MiB with the System Configuration Registers in even
> - * though only 64KiB is needed. This makes it easier for use with the
> - * head debug code as the initial MMU setup only deals in L1 sections.
> - */
> -#define KS8695_IO_PA 0x03F00000
> -#define KS8695_IO_VA IOMEM(0xF0000000)
> -#define KS8695_IO_SIZE SZ_1M
> -
> -#define KS8695_PCIMEM_PA 0x60000000
> -#define KS8695_PCIMEM_SIZE SZ_512M
> -
> -#define KS8695_PCIIO_PA 0x80000000
> -#define KS8695_PCIIO_SIZE SZ_64K
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/include/mach/irqs.h b/arch/arm/mach-ks8695/include/mach/irqs.h
> deleted file mode 100644
> index 0cbb30672427..000000000000
> --- a/arch/arm/mach-ks8695/include/mach/irqs.h
> +++ /dev/null
> @@ -1,51 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/mach-ks8695/include/mach/irqs.h
> - *
> - * Copyright (C) 2006 Simtec Electronics
> - * Ben Dooks <ben@simtec.co.uk>
> - */
> -
> -#ifndef __ASM_ARCH_IRQS_H
> -#define __ASM_ARCH_IRQS_H
> -
> -
> -#define NR_IRQS 32
> -
> -/*
> - * IRQ definitions
> - */
> -#define KS8695_IRQ_COMM_RX 0
> -#define KS8695_IRQ_COMM_TX 1
> -#define KS8695_IRQ_EXTERN0 2
> -#define KS8695_IRQ_EXTERN1 3
> -#define KS8695_IRQ_EXTERN2 4
> -#define KS8695_IRQ_EXTERN3 5
> -#define KS8695_IRQ_TIMER0 6
> -#define KS8695_IRQ_TIMER1 7
> -#define KS8695_IRQ_UART_TX 8
> -#define KS8695_IRQ_UART_RX 9
> -#define KS8695_IRQ_UART_LINE_STATUS 10
> -#define KS8695_IRQ_UART_MODEM_STATUS 11
> -#define KS8695_IRQ_LAN_RX_STOP 12
> -#define KS8695_IRQ_LAN_TX_STOP 13
> -#define KS8695_IRQ_LAN_RX_BUF 14
> -#define KS8695_IRQ_LAN_TX_BUF 15
> -#define KS8695_IRQ_LAN_RX_STATUS 16
> -#define KS8695_IRQ_LAN_TX_STATUS 17
> -#define KS8695_IRQ_HPNA_RX_STOP 18
> -#define KS8695_IRQ_HPNA_TX_STOP 19
> -#define KS8695_IRQ_HPNA_RX_BUF 20
> -#define KS8695_IRQ_HPNA_TX_BUF 21
> -#define KS8695_IRQ_HPNA_RX_STATUS 22
> -#define KS8695_IRQ_HPNA_TX_STATUS 23
> -#define KS8695_IRQ_BUS_ERROR 24
> -#define KS8695_IRQ_WAN_RX_STOP 25
> -#define KS8695_IRQ_WAN_TX_STOP 26
> -#define KS8695_IRQ_WAN_RX_BUF 27
> -#define KS8695_IRQ_WAN_TX_BUF 28
> -#define KS8695_IRQ_WAN_RX_STATUS 29
> -#define KS8695_IRQ_WAN_TX_STATUS 30
> -#define KS8695_IRQ_WAN_LINK 31
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
> deleted file mode 100644
> index ab0d27fa8969..000000000000
> --- a/arch/arm/mach-ks8695/include/mach/memory.h
> +++ /dev/null
> @@ -1,51 +0,0 @@
> -/*
> - * arch/arm/mach-ks8695/include/mach/memory.h
> - *
> - * Copyright (C) 2006 Andrew Victor
> - *
> - * KS8695 Memory definitions
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#ifndef __ASM_ARCH_MEMORY_H
> -#define __ASM_ARCH_MEMORY_H
> -
> -#include <mach/hardware.h>
> -
> -#ifndef __ASSEMBLY__
> -
> -#ifdef CONFIG_PCI
> -
> -/* PCI mappings */
> -#define __virt_to_bus(x) ((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
> -#define __bus_to_virt(x) ((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
> -
> -/* Platform-bus mapping */
> -extern struct bus_type platform_bus_type;
> -#define is_lbus_device(dev) (dev && dev->bus == &platform_bus_type)
> -#define __arch_dma_to_virt(dev, x) ({ (void *) (is_lbus_device(dev) ? \
> - __phys_to_virt(x) : __bus_to_virt(x)); })
> -#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \
> - (dma_addr_t)__virt_to_phys((unsigned long)x) \
> - : (dma_addr_t)__virt_to_bus(x); })
> -#define __arch_pfn_to_dma(dev, pfn) \
> - ({ dma_addr_t __dma = __pfn_to_phys(pfn); \
> - if (!is_lbus_device(dev)) \
> - __dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
> - __dma; })
> -
> -#define __arch_dma_to_pfn(dev, x) \
> - ({ dma_addr_t __dma = x; \
> - if (!is_lbus_device(dev)) \
> - __dma += PHYS_OFFSET - KS8695_PCIMEM_PA; \
> - __phys_to_pfn(__dma); \
> - })
> -
> -#endif
> -
> -#endif
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
> deleted file mode 100644
> index 90614a7d0548..000000000000
> --- a/arch/arm/mach-ks8695/include/mach/regs-gpio.h
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -/*
> - * arch/arm/mach-ks8695/include/mach/regs-gpio.h
> - *
> - * Copyright (C) 2007 Andrew Victor
> - *
> - * KS8695 - GPIO control registers and bit definitions.
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#ifndef KS8695_GPIO_H
> -#define KS8695_GPIO_H
> -
> -#define KS8695_GPIO_OFFSET (0xF0000 + 0xE600)
> -#define KS8695_GPIO_VA (KS8695_IO_VA + KS8695_GPIO_OFFSET)
> -#define KS8695_GPIO_PA (KS8695_IO_PA + KS8695_GPIO_OFFSET)
> -
> -
> -#define KS8695_IOPM (0x00) /* I/O Port Mode Register */
> -#define KS8695_IOPC (0x04) /* I/O Port Control Register */
> -#define KS8695_IOPD (0x08) /* I/O Port Data Register */
> -
> -
> -/* Port Mode Register */
> -#define IOPM(x) (1 << (x)) /* Mode for GPIO Pin x */
> -
> -/* Port Control Register */
> -#define IOPC_IOTIM1EN (1 << 17) /* GPIO Pin for Timer1 Enable */
> -#define IOPC_IOTIM0EN (1 << 16) /* GPIO Pin for Timer0 Enable */
> -#define IOPC_IOEINT3EN (1 << 15) /* GPIO Pin for External/Soft Interrupt 3 Enable */
> -#define IOPC_IOEINT3TM (7 << 12) /* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
> -#define IOPC_IOEINT3_MODE(x) ((x) << 12)
> -#define IOPC_IOEINT2EN (1 << 11) /* GPIO Pin for External/Soft Interrupt 2 Enable */
> -#define IOPC_IOEINT2TM (7 << 8) /* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
> -#define IOPC_IOEINT2_MODE(x) ((x) << 8)
> -#define IOPC_IOEINT1EN (1 << 7) /* GPIO Pin for External/Soft Interrupt 1 Enable */
> -#define IOPC_IOEINT1TM (7 << 4) /* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
> -#define IOPC_IOEINT1_MODE(x) ((x) << 4)
> -#define IOPC_IOEINT0EN (1 << 3) /* GPIO Pin for External/Soft Interrupt 0 Enable */
> -#define IOPC_IOEINT0TM (7 << 0) /* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
> -#define IOPC_IOEINT0_MODE(x) ((x) << 0)
> -
> - /* Trigger Modes */
> -#define IOPC_TM_LOW (0) /* Level Detection (Active Low) */
> -#define IOPC_TM_HIGH (1) /* Level Detection (Active High) */
> -#define IOPC_TM_RISING (2) /* Rising Edge Detection */
> -#define IOPC_TM_FALLING (4) /* Falling Edge Detection */
> -#define IOPC_TM_EDGE (6) /* Both Edge Detection */
> -
> -/* Port Data Register */
> -#define IOPD(x) (1 << (x)) /* Signal Level of GPIO Pin x */
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/include/mach/regs-irq.h b/arch/arm/mach-ks8695/include/mach/regs-irq.h
> deleted file mode 100644
> index 352b7e8704d5..000000000000
> --- a/arch/arm/mach-ks8695/include/mach/regs-irq.h
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -/*
> - * arch/arm/mach-ks8695/include/mach/regs-irq.h
> - *
> - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
> - * Copyright (C) 2006 Simtec Electronics
> - *
> - * KS8695 - IRQ registers and bit definitions
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#ifndef KS8695_IRQ_H
> -#define KS8695_IRQ_H
> -
> -#define KS8695_IRQ_OFFSET (0xF0000 + 0xE200)
> -#define KS8695_IRQ_VA (KS8695_IO_VA + KS8695_IRQ_OFFSET)
> -#define KS8695_IRQ_PA (KS8695_IO_PA + KS8695_IRQ_OFFSET)
> -
> -
> -/*
> - * Interrupt Controller registers
> - */
> -#define KS8695_INTMC (0x00) /* Mode Control Register */
> -#define KS8695_INTEN (0x04) /* Interrupt Enable Register */
> -#define KS8695_INTST (0x08) /* Interrupt Status Register */
> -#define KS8695_INTPW (0x0c) /* Interrupt Priority (WAN MAC) */
> -#define KS8695_INTPH (0x10) /* Interrupt Priority (HPNA) [KS8695 only] */
> -#define KS8695_INTPL (0x14) /* Interrupt Priority (LAN MAC) */
> -#define KS8695_INTPT (0x18) /* Interrupt Priority (Timer) */
> -#define KS8695_INTPU (0x1c) /* Interrupt Priority (UART) */
> -#define KS8695_INTPE (0x20) /* Interrupt Priority (External Interrupt) */
> -#define KS8695_INTPC (0x24) /* Interrupt Priority (Communications Channel) */
> -#define KS8695_INTPBE (0x28) /* Interrupt Priority (Bus Error Response) */
> -#define KS8695_INTMS (0x2c) /* Interrupt Mask Status Register */
> -#define KS8695_INTHPF (0x30) /* Interrupt Pending Highest Priority (FIQ) */
> -#define KS8695_INTHPI (0x34) /* Interrupt Pending Highest Priority (IRQ) */
> -
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/include/mach/regs-misc.h b/arch/arm/mach-ks8695/include/mach/regs-misc.h
> deleted file mode 100644
> index 2740c52494a0..000000000000
> --- a/arch/arm/mach-ks8695/include/mach/regs-misc.h
> +++ /dev/null
> @@ -1,97 +0,0 @@
> -/*
> - * arch/arm/mach-ks8695/include/mach/regs-misc.h
> - *
> - * Copyright (C) 2006 Andrew Victor
> - *
> - * KS8695 - Miscellaneous Registers
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#ifndef KS8695_MISC_H
> -#define KS8695_MISC_H
> -
> -#define KS8695_MISC_OFFSET (0xF0000 + 0xEA00)
> -#define KS8695_MISC_VA (KS8695_IO_VA + KS8695_MISC_OFFSET)
> -#define KS8695_MISC_PA (KS8695_IO_PA + KS8695_MISC_OFFSET)
> -
> -
> -/*
> - * Miscellaneous registers
> - */
> -#define KS8695_DID (0x00) /* Device ID */
> -#define KS8695_RID (0x04) /* Revision ID */
> -#define KS8695_HMC (0x08) /* HPNA Miscellaneous Control [KS8695 only] */
> -#define KS8695_WMC (0x0c) /* WAN Miscellaneous Control */
> -#define KS8695_WPPM (0x10) /* WAN PHY Power Management */
> -#define KS8695_PPS (0x1c) /* PHY PowerSave */
> -
> -/* Device ID Register */
> -#define DID_ID (0xffff << 0) /* Device ID */
> -
> -/* Revision ID Register */
> -#define RID_SUBID (0xf << 4) /* Sub-Device ID */
> -#define RID_REVISION (0xf << 0) /* Revision ID */
> -
> -/* HPNA Miscellaneous Control Register */
> -#define HMC_HSS (1 << 1) /* Speed */
> -#define HMC_HDS (1 << 0) /* Duplex */
> -
> -/* WAN Miscellaneous Control Register */
> -#define WMC_WANC (1 << 30) /* Auto-negotiation complete */
> -#define WMC_WANR (1 << 29) /* Auto-negotiation restart */
> -#define WMC_WANAP (1 << 28) /* Advertise Pause */
> -#define WMC_WANA100F (1 << 27) /* Advertise 100 FDX */
> -#define WMC_WANA100H (1 << 26) /* Advertise 100 HDX */
> -#define WMC_WANA10F (1 << 25) /* Advertise 10 FDX */
> -#define WMC_WANA10H (1 << 24) /* Advertise 10 HDX */
> -#define WMC_WLS (1 << 23) /* Link status */
> -#define WMC_WDS (1 << 22) /* Duplex status */
> -#define WMC_WSS (1 << 21) /* Speed status */
> -#define WMC_WLPP (1 << 20) /* Link Partner Pause */
> -#define WMC_WLP100F (1 << 19) /* Link Partner 100 FDX */
> -#define WMC_WLP100H (1 << 18) /* Link Partner 100 HDX */
> -#define WMC_WLP10F (1 << 17) /* Link Partner 10 FDX */
> -#define WMC_WLP10H (1 << 16) /* Link Partner 10 HDX */
> -#define WMC_WAND (1 << 15) /* Auto-negotiation disable */
> -#define WMC_WANF100 (1 << 14) /* Force 100 */
> -#define WMC_WANFF (1 << 13) /* Force FDX */
> -#define WMC_WLED1S (7 << 4) /* LED1 Select */
> -#define WLED1S_SPEED (0 << 4)
> -#define WLED1S_LINK (1 << 4)
> -#define WLED1S_DUPLEX (2 << 4)
> -#define WLED1S_COLLISION (3 << 4)
> -#define WLED1S_ACTIVITY (4 << 4)
> -#define WLED1S_FDX_COLLISION (5 << 4)
> -#define WLED1S_LINK_ACTIVITY (6 << 4)
> -#define WMC_WLED0S (7 << 0) /* LED0 Select */
> -#define WLED0S_SPEED (0 << 0)
> -#define WLED0S_LINK (1 << 0)
> -#define WLED0S_DUPLEX (2 << 0)
> -#define WLED0S_COLLISION (3 << 0)
> -#define WLED0S_ACTIVITY (4 << 0)
> -#define WLED0S_FDX_COLLISION (5 << 0)
> -#define WLED0S_LINK_ACTIVITY (6 << 0)
> -
> -/* WAN PHY Power Management Register */
> -#define WPPM_WLPBK (1 << 14) /* Local Loopback */
> -#define WPPM_WRLPKB (1 << 13) /* Remove Loopback */
> -#define WPPM_WPI (1 << 12) /* PHY isolate */
> -#define WPPM_WFL (1 << 10) /* Force link */
> -#define WPPM_MDIXS (1 << 9) /* MDIX Status */
> -#define WPPM_FEF (1 << 8) /* Far End Fault */
> -#define WPPM_AMDIXP (1 << 7) /* Auto MDIX Parameter */
> -#define WPPM_TXDIS (1 << 6) /* Disable transmitter */
> -#define WPPM_DFEF (1 << 5) /* Disable Far End Fault */
> -#define WPPM_PD (1 << 4) /* Power Down */
> -#define WPPM_DMDX (1 << 3) /* Disable Auto MDI/MDIX */
> -#define WPPM_FMDX (1 << 2) /* Force MDIX */
> -#define WPPM_LPBK (1 << 1) /* MAX Loopback */
> -
> -/* PHY Power Save Register */
> -#define PPS_PPSM (1 << 0) /* PHY Power Save Mode */
> -
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h
> deleted file mode 100644
> index 97e8acb1cf6c..000000000000
> --- a/arch/arm/mach-ks8695/include/mach/regs-switch.h
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -/*
> - * arch/arm/mach-ks8695/include/mach/regs-switch.h
> - *
> - * Copyright (C) 2006 Andrew Victor
> - *
> - * KS8695 - Switch Registers and bit definitions.
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#ifndef KS8695_SWITCH_H
> -#define KS8695_SWITCH_H
> -
> -#define KS8695_SWITCH_OFFSET (0xF0000 + 0xe800)
> -#define KS8695_SWITCH_VA (KS8695_IO_VA + KS8695_SWITCH_OFFSET)
> -#define KS8695_SWITCH_PA (KS8695_IO_PA + KS8695_SWITCH_OFFSET)
> -
> -
> -/*
> - * Switch registers
> - */
> -#define KS8695_SEC0 (0x00) /* Switch Engine Control 0 */
> -#define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */
> -#define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */
> -
> -#define KS8695_SEPXCZ(x,z) (0x0c + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */
> -
> -#define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */
> -#define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */
> -#define KS8695_SEIAC (0x50) /* Indirect Access Control */
> -#define KS8695_SEIADH2 (0x54) /* Indirect Access Data High 2 */
> -#define KS8695_SEIADH1 (0x58) /* Indirect Access Data High 1 */
> -#define KS8695_SEIADL (0x5c) /* Indirect Access Data Low */
> -#define KS8695_SEAFC (0x60) /* Advance Feature Control */
> -#define KS8695_SEDSCPH (0x64) /* TOS Priority High */
> -#define KS8695_SEDSCPL (0x68) /* TOS Priority Low */
> -#define KS8695_SEMAH (0x6c) /* Switch Engine MAC Address High */
> -#define KS8695_SEMAL (0x70) /* Switch Engine MAC Address Low */
> -#define KS8695_LPPM12 (0x74) /* Port 1 & 2 PHY Power Management */
> -#define KS8695_LPPM34 (0x78) /* Port 3 & 4 PHY Power Management */
> -
> -
> -/* Switch Engine Control 0 */
> -#define SEC0_LLED1S (7 << 25) /* LED1 Select */
> -#define LLED1S_SPEED (0 << 25)
> -#define LLED1S_LINK (1 << 25)
> -#define LLED1S_DUPLEX (2 << 25)
> -#define LLED1S_COLLISION (3 << 25)
> -#define LLED1S_ACTIVITY (4 << 25)
> -#define LLED1S_FDX_COLLISION (5 << 25)
> -#define LLED1S_LINK_ACTIVITY (6 << 25)
> -#define SEC0_LLED0S (7 << 22) /* LED0 Select */
> -#define LLED0S_SPEED (0 << 22)
> -#define LLED0S_LINK (1 << 22)
> -#define LLED0S_DUPLEX (2 << 22)
> -#define LLED0S_COLLISION (3 << 22)
> -#define LLED0S_ACTIVITY (4 << 22)
> -#define LLED0S_FDX_COLLISION (5 << 22)
> -#define LLED0S_LINK_ACTIVITY (6 << 22)
> -#define SEC0_ENABLE (1 << 0) /* Enable Switch */
> -
> -
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/include/mach/regs-uart.h b/arch/arm/mach-ks8695/include/mach/regs-uart.h
> deleted file mode 100644
> index 941a542c5f23..000000000000
> --- a/arch/arm/mach-ks8695/include/mach/regs-uart.h
> +++ /dev/null
> @@ -1,89 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/mach-ks8695/include/mach/regs-uart.h
> - *
> - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
> - * Copyright (C) 2006 Simtec Electronics
> - *
> - * KS8695 - UART register and bit definitions.
> - */
> -
> -#ifndef KS8695_UART_H
> -#define KS8695_UART_H
> -
> -#define KS8695_UART_OFFSET (0xF0000 + 0xE000)
> -#define KS8695_UART_VA (KS8695_IO_VA + KS8695_UART_OFFSET)
> -#define KS8695_UART_PA (KS8695_IO_PA + KS8695_UART_OFFSET)
> -
> -
> -/*
> - * UART registers
> - */
> -#define KS8695_URRB (0x00) /* Receive Buffer Register */
> -#define KS8695_URTH (0x04) /* Transmit Holding Register */
> -#define KS8695_URFC (0x08) /* FIFO Control Register */
> -#define KS8695_URLC (0x0C) /* Line Control Register */
> -#define KS8695_URMC (0x10) /* Modem Control Register */
> -#define KS8695_URLS (0x14) /* Line Status Register */
> -#define KS8695_URMS (0x18) /* Modem Status Register */
> -#define KS8695_URBD (0x1C) /* Baud Rate Divisor Register */
> -#define KS8695_USR (0x20) /* Status Register */
> -
> -
> -/* FIFO Control Register */
> -#define URFC_URFRT (3 << 6) /* Receive FIFO Trigger Level */
> -#define URFC_URFRT_1 (0 << 6)
> -#define URFC_URFRT_4 (1 << 6)
> -#define URFC_URFRT_8 (2 << 6)
> -#define URFC_URFRT_14 (3 << 6)
> -#define URFC_URTFR (1 << 2) /* Transmit FIFO Reset */
> -#define URFC_URRFR (1 << 1) /* Receive FIFO Reset */
> -#define URFC_URFE (1 << 0) /* FIFO Enable */
> -
> -/* Line Control Register */
> -#define URLC_URSBC (1 << 6) /* Set Break Condition */
> -#define URLC_PARITY (7 << 3) /* Parity */
> -#define URPE_NONE (0 << 3)
> -#define URPE_ODD (1 << 3)
> -#define URPE_EVEN (3 << 3)
> -#define URPE_MARK (5 << 3)
> -#define URPE_SPACE (7 << 3)
> -#define URLC_URSB (1 << 2) /* Stop Bits */
> -#define URLC_URCL (3 << 0) /* Character Length */
> -#define URCL_5 (0 << 0)
> -#define URCL_6 (1 << 0)
> -#define URCL_7 (2 << 0)
> -#define URCL_8 (3 << 0)
> -
> -/* Modem Control Register */
> -#define URMC_URLB (1 << 4) /* Loop-back mode */
> -#define URMC_UROUT2 (1 << 3) /* OUT2 signal */
> -#define URMC_UROUT1 (1 << 2) /* OUT1 signal */
> -#define URMC_URRTS (1 << 1) /* Request to Send */
> -#define URMC_URDTR (1 << 0) /* Data Terminal Ready */
> -
> -/* Line Status Register */
> -#define URLS_URRFE (1 << 7) /* Receive FIFO Error */
> -#define URLS_URTE (1 << 6) /* Transmit Empty */
> -#define URLS_URTHRE (1 << 5) /* Transmit Holding Register Empty */
> -#define URLS_URBI (1 << 4) /* Break Interrupt */
> -#define URLS_URFE (1 << 3) /* Framing Error */
> -#define URLS_URPE (1 << 2) /* Parity Error */
> -#define URLS_URROE (1 << 1) /* Receive Overrun Error */
> -#define URLS_URDR (1 << 0) /* Receive Data Ready */
> -
> -/* Modem Status Register */
> -#define URMS_URDCD (1 << 7) /* Data Carrier Detect */
> -#define URMS_URRI (1 << 6) /* Ring Indicator */
> -#define URMS_URDSR (1 << 5) /* Data Set Ready */
> -#define URMS_URCTS (1 << 4) /* Clear to Send */
> -#define URMS_URDDCD (1 << 3) /* Delta Data Carrier Detect */
> -#define URMS_URTERI (1 << 2) /* Trailing Edge Ring Indicator */
> -#define URMS_URDDST (1 << 1) /* Delta Data Set Ready */
> -#define URMS_URDCTS (1 << 0) /* Delta Clear to Send */
> -
> -/* Status Register */
> -#define USR_UTI (1 << 0) /* Timeout Indication */
> -
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
> deleted file mode 100644
> index dc78a29759b5..000000000000
> --- a/arch/arm/mach-ks8695/include/mach/uncompress.h
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * arch/arm/mach-ks8695/include/mach/uncompress.h
> - *
> - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
> - * Copyright (C) 2006 Simtec Electronics
> - *
> - * KS8695 - Kernel uncompressor
> - */
> -
> -#ifndef __ASM_ARCH_UNCOMPRESS_H
> -#define __ASM_ARCH_UNCOMPRESS_H
> -
> -#include <linux/io.h>
> -#include <mach/regs-uart.h>
> -
> -static inline void putc(char c)
> -{
> - while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
> - barrier();
> -
> - __raw_writel(c, (void __iomem*)KS8695_UART_PA + KS8695_URTH);
> -}
> -
> -static inline void flush(void)
> -{
> - while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
> - barrier();
> -}
> -
> -#define arch_decomp_setup()
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
> deleted file mode 100644
> index 4b7ec8d9300c..000000000000
> --- a/arch/arm/mach-ks8695/irq.c
> +++ /dev/null
> @@ -1,164 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * arch/arm/mach-ks8695/irq.c
> - *
> - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
> - * Copyright (C) 2006 Simtec Electronics
> - */
> -
> -#include <linux/init.h>
> -#include <linux/module.h>
> -#include <linux/interrupt.h>
> -#include <linux/ioport.h>
> -#include <linux/device.h>
> -#include <linux/io.h>
> -
> -#include <mach/hardware.h>
> -#include <asm/irq.h>
> -
> -#include <asm/mach/irq.h>
> -
> -#include <mach/regs-irq.h>
> -#include <mach/regs-gpio.h>
> -
> -static void ks8695_irq_mask(struct irq_data *d)
> -{
> - unsigned long inten;
> -
> - inten = __raw_readl(KS8695_IRQ_VA + KS8695_INTEN);
> - inten &= ~(1 << d->irq);
> -
> - __raw_writel(inten, KS8695_IRQ_VA + KS8695_INTEN);
> -}
> -
> -static void ks8695_irq_unmask(struct irq_data *d)
> -{
> - unsigned long inten;
> -
> - inten = __raw_readl(KS8695_IRQ_VA + KS8695_INTEN);
> - inten |= (1 << d->irq);
> -
> - __raw_writel(inten, KS8695_IRQ_VA + KS8695_INTEN);
> -}
> -
> -static void ks8695_irq_ack(struct irq_data *d)
> -{
> - __raw_writel((1 << d->irq), KS8695_IRQ_VA + KS8695_INTST);
> -}
> -
> -
> -static struct irq_chip ks8695_irq_level_chip;
> -static struct irq_chip ks8695_irq_edge_chip;
> -
> -
> -static int ks8695_irq_set_type(struct irq_data *d, unsigned int type)
> -{
> - unsigned long ctrl, mode;
> - unsigned short level_triggered = 0;
> -
> - ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
> -
> - switch (type) {
> - case IRQ_TYPE_LEVEL_HIGH:
> - mode = IOPC_TM_HIGH;
> - level_triggered = 1;
> - break;
> - case IRQ_TYPE_LEVEL_LOW:
> - mode = IOPC_TM_LOW;
> - level_triggered = 1;
> - break;
> - case IRQ_TYPE_EDGE_RISING:
> - mode = IOPC_TM_RISING;
> - break;
> - case IRQ_TYPE_EDGE_FALLING:
> - mode = IOPC_TM_FALLING;
> - break;
> - case IRQ_TYPE_EDGE_BOTH:
> - mode = IOPC_TM_EDGE;
> - break;
> - default:
> - return -EINVAL;
> - }
> -
> - switch (d->irq) {
> - case KS8695_IRQ_EXTERN0:
> - ctrl &= ~IOPC_IOEINT0TM;
> - ctrl |= IOPC_IOEINT0_MODE(mode);
> - break;
> - case KS8695_IRQ_EXTERN1:
> - ctrl &= ~IOPC_IOEINT1TM;
> - ctrl |= IOPC_IOEINT1_MODE(mode);
> - break;
> - case KS8695_IRQ_EXTERN2:
> - ctrl &= ~IOPC_IOEINT2TM;
> - ctrl |= IOPC_IOEINT2_MODE(mode);
> - break;
> - case KS8695_IRQ_EXTERN3:
> - ctrl &= ~IOPC_IOEINT3TM;
> - ctrl |= IOPC_IOEINT3_MODE(mode);
> - break;
> - default:
> - return -EINVAL;
> - }
> -
> - if (level_triggered) {
> - irq_set_chip_and_handler(d->irq, &ks8695_irq_level_chip,
> - handle_level_irq);
> - }
> - else {
> - irq_set_chip_and_handler(d->irq, &ks8695_irq_edge_chip,
> - handle_edge_irq);
> - }
> -
> - __raw_writel(ctrl, KS8695_GPIO_VA + KS8695_IOPC);
> - return 0;
> -}
> -
> -static struct irq_chip ks8695_irq_level_chip = {
> - .irq_ack = ks8695_irq_mask,
> - .irq_mask = ks8695_irq_mask,
> - .irq_unmask = ks8695_irq_unmask,
> - .irq_set_type = ks8695_irq_set_type,
> -};
> -
> -static struct irq_chip ks8695_irq_edge_chip = {
> - .irq_ack = ks8695_irq_ack,
> - .irq_mask = ks8695_irq_mask,
> - .irq_unmask = ks8695_irq_unmask,
> - .irq_set_type = ks8695_irq_set_type,
> -};
> -
> -void __init ks8695_init_irq(void)
> -{
> - unsigned int irq;
> -
> - /* Disable all interrupts initially */
> - __raw_writel(0, KS8695_IRQ_VA + KS8695_INTMC);
> - __raw_writel(0, KS8695_IRQ_VA + KS8695_INTEN);
> -
> - for (irq = 0; irq < NR_IRQS; irq++) {
> - switch (irq) {
> - /* Level-triggered interrupts */
> - case KS8695_IRQ_BUS_ERROR:
> - case KS8695_IRQ_UART_MODEM_STATUS:
> - case KS8695_IRQ_UART_LINE_STATUS:
> - case KS8695_IRQ_UART_RX:
> - case KS8695_IRQ_COMM_TX:
> - case KS8695_IRQ_COMM_RX:
> - irq_set_chip_and_handler(irq,
> - &ks8695_irq_level_chip,
> - handle_level_irq);
> - break;
> -
> - /* Edge-triggered interrupts */
> - default:
> - /* clear pending bit */
> - ks8695_irq_ack(irq_get_irq_data(irq));
> - irq_set_chip_and_handler(irq,
> - &ks8695_irq_edge_chip,
> - handle_edge_irq);
> - }
> -
> - irq_clear_status_flags(irq, IRQ_NOREQUEST);
> - }
> -}
> diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
> deleted file mode 100644
> index 83f330bf07dd..000000000000
> --- a/arch/arm/mach-ks8695/pci.c
> +++ /dev/null
> @@ -1,247 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * arch/arm/mach-ks8695/pci.c
> - *
> - * Copyright (C) 2003, Micrel Semiconductors
> - * Copyright (C) 2006, Greg Ungerer <gerg@snapgear.com>
> - * Copyright (C) 2006, Ben Dooks
> - * Copyright (C) 2007, Andrew Victor
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/pci.h>
> -#include <linux/mm.h>
> -#include <linux/init.h>
> -#include <linux/irq.h>
> -#include <linux/delay.h>
> -#include <linux/io.h>
> -
> -#include <asm/signal.h>
> -#include <asm/mach/pci.h>
> -#include <mach/hardware.h>
> -
> -#include "devices.h"
> -#include "regs-pci.h"
> -
> -
> -static int pci_dbg;
> -
> -static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsigned int where)
> -{
> - unsigned long pbca;
> -
> - pbca = PBCA_ENABLE | (where & ~3);
> - pbca |= PCI_SLOT(devfn) << 11 ;
> - pbca |= PCI_FUNC(devfn) << 8;
> - pbca |= bus_nr << 16;
> -
> - if (bus_nr == 0) {
> - /* use Type-0 transaction */
> - __raw_writel(pbca, KS8695_PCI_VA + KS8695_PBCA);
> - } else {
> - /* use Type-1 transaction */
> - __raw_writel(pbca | PBCA_TYPE1, KS8695_PCI_VA + KS8695_PBCA);
> - }
> -}
> -
> -static void __iomem *ks8695_pci_map_bus(struct pci_bus *bus, unsigned int devfn,
> - int where)
> -{
> - ks8695_pci_setupconfig(bus->number, devfn, where);
> - return KS8695_PCI_VA + KS8695_PBCD;
> -}
> -
> -static void ks8695_local_writeconfig(int where, u32 value)
> -{
> - ks8695_pci_setupconfig(0, 0, where);
> - __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
> -}
> -
> -static struct pci_ops ks8695_pci_ops = {
> - .map_bus = ks8695_pci_map_bus,
> - .read = pci_generic_config_read32,
> - .write = pci_generic_config_write32,
> -};
> -
> -static struct resource pci_mem = {
> - .name = "PCI Memory space",
> - .start = KS8695_PCIMEM_PA,
> - .end = KS8695_PCIMEM_PA + (KS8695_PCIMEM_SIZE - 1),
> - .flags = IORESOURCE_MEM,
> -};
> -
> -static struct resource pci_io = {
> - .name = "PCI IO space",
> - .start = KS8695_PCIIO_PA,
> - .end = KS8695_PCIIO_PA + (KS8695_PCIIO_SIZE - 1),
> - .flags = IORESOURCE_IO,
> -};
> -
> -static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys)
> -{
> - if (nr > 0)
> - return 0;
> -
> - request_resource(&iomem_resource, &pci_mem);
> - request_resource(&ioport_resource, &pci_io);
> -
> - pci_add_resource_offset(&sys->resources, &pci_io, sys->io_offset);
> - pci_add_resource_offset(&sys->resources, &pci_mem, sys->mem_offset);
> -
> - /* Assign and enable processor bridge */
> - ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA);
> -
> - /* Enable bus-master & Memory Space access */
> - ks8695_local_writeconfig(PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
> -
> - /* Set cache-line size & latency. */
> - ks8695_local_writeconfig(PCI_CACHE_LINE_SIZE, (32 << 8) | (L1_CACHE_BYTES / sizeof(u32)));
> -
> - /* Reserve PCI memory space for PCI-AHB resources */
> - if (!request_mem_region(KS8695_PCIMEM_PA, SZ_64M, "PCI-AHB Bridge")) {
> - printk(KERN_ERR "Cannot allocate PCI-AHB Bridge memory.\n");
> - return -EBUSY;
> - }
> -
> - return 1;
> -}
> -
> -static inline unsigned int size_mask(unsigned long size)
> -{
> - return (~size) + 1;
> -}
> -
> -static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
> -{
> - unsigned long pc = instruction_pointer(regs);
> - unsigned long instr = *(unsigned long *)pc;
> - unsigned long cmdstat;
> -
> - cmdstat = __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS);
> -
> - printk(KERN_ERR "PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx [%s%s%s%s%s]\n",
> - addr, fsr, regs->ARM_pc, regs->ARM_lr,
> - cmdstat & (PCI_STATUS_SIG_TARGET_ABORT << 16) ? "GenTarget" : " ",
> - cmdstat & (PCI_STATUS_REC_TARGET_ABORT << 16) ? "RecvTarget" : " ",
> - cmdstat & (PCI_STATUS_REC_MASTER_ABORT << 16) ? "MasterAbort" : " ",
> - cmdstat & (PCI_STATUS_SIG_SYSTEM_ERROR << 16) ? "SysError" : " ",
> - cmdstat & (PCI_STATUS_DETECTED_PARITY << 16) ? "Parity" : " "
> - );
> -
> - __raw_writel(cmdstat, KS8695_PCI_VA + KS8695_CRCFCS);
> -
> - /*
> - * If the instruction being executed was a read,
> - * make it look like it read all-ones.
> - */
> - if ((instr & 0x0c100000) == 0x04100000) {
> - int reg = (instr >> 12) & 15;
> - unsigned long val;
> -
> - if (instr & 0x00400000)
> - val = 255;
> - else
> - val = -1;
> -
> - regs->uregs[reg] = val;
> - regs->ARM_pc += 4;
> - return 0;
> - }
> -
> - if ((instr & 0x0e100090) == 0x00100090) {
> - int reg = (instr >> 12) & 15;
> -
> - regs->uregs[reg] = -1;
> - regs->ARM_pc += 4;
> - return 0;
> - }
> -
> - return 1;
> -}
> -
> -static void __init ks8695_pci_preinit(void)
> -{
> - /* make software reset to avoid freeze if PCI bus was messed up */
> - __raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS);
> -
> - /* stage 1 initialization, subid, subdevice = 0x0001 */
> - __raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
> -
> - /* stage 2 initialization */
> - /* prefetch limits with 16 words, retry enable */
> - __raw_writel(0x40000000, KS8695_PCI_VA + KS8695_PBCS);
> -
> - /* configure memory mapping */
> - __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBA);
> - __raw_writel(size_mask(KS8695_PCIMEM_SIZE), KS8695_PCI_VA + KS8695_PMBAM);
> - __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBAT);
> - __raw_writel(0, KS8695_PCI_VA + KS8695_PMBAC);
> -
> - /* configure IO mapping */
> - __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBA);
> - __raw_writel(size_mask(KS8695_PCIIO_SIZE), KS8695_PCI_VA + KS8695_PIOBAM);
> - __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBAT);
> - __raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC);
> -
> - /* hook in fault handlers */
> - hook_fault_code(8, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
> - hook_fault_code(10, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
> -}
> -
> -static void ks8695_show_pciregs(void)
> -{
> - if (!pci_dbg)
> - return;
> -
> - printk(KERN_INFO "PCI: CRCFID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFID));
> - printk(KERN_INFO "PCI: CRCFCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS));
> - printk(KERN_INFO "PCI: CRCFRV = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFRV));
> - printk(KERN_INFO "PCI: CRCFLT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFLT));
> - printk(KERN_INFO "PCI: CRCBMA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCBMA));
> - printk(KERN_INFO "PCI: CRCSID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCSID));
> - printk(KERN_INFO "PCI: CRCFIT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFIT));
> -
> - printk(KERN_INFO "PCI: PBM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBM));
> - printk(KERN_INFO "PCI: PBCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBCS));
> -
> - printk(KERN_INFO "PCI: PMBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBA));
> - printk(KERN_INFO "PCI: PMBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAC));
> - printk(KERN_INFO "PCI: PMBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAM));
> - printk(KERN_INFO "PCI: PMBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAT));
> -
> - printk(KERN_INFO "PCI: PIOBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBA));
> - printk(KERN_INFO "PCI: PIOBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAC));
> - printk(KERN_INFO "PCI: PIOBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAM));
> - printk(KERN_INFO "PCI: PIOBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAT));
> -}
> -
> -
> -static struct hw_pci ks8695_pci __initdata = {
> - .nr_controllers = 1,
> - .ops = &ks8695_pci_ops,
> - .preinit = ks8695_pci_preinit,
> - .setup = ks8695_pci_setup,
> - .postinit = NULL,
> - .map_irq = NULL,
> -};
> -
> -void __init ks8695_init_pci(struct ks8695_pci_cfg *cfg)
> -{
> - if (__raw_readl(KS8695_PCI_VA + KS8695_CRCFRV) & CFRV_GUEST) {
> - printk("PCI: KS8695 in guest mode, not initialising\n");
> - return;
> - }
> -
> - pcibios_min_io = 0;
> - pcibios_min_mem = 0;
> -
> - printk(KERN_INFO "PCI: Initialising\n");
> - ks8695_show_pciregs();
> -
> - /* set Mode */
> - __raw_writel(cfg->mode << 29, KS8695_PCI_VA + KS8695_PBM);
> -
> - ks8695_pci.map_irq = cfg->map_irq; /* board-specific map_irq method */
> -
> - pci_common_init(&ks8695_pci);
> -}
> diff --git a/arch/arm/mach-ks8695/regs-hpna.h b/arch/arm/mach-ks8695/regs-hpna.h
> deleted file mode 100644
> index 815ce5c2e3b9..000000000000
> --- a/arch/arm/mach-ks8695/regs-hpna.h
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -/*
> - * arch/arm/mach-ks8695/include/mach/regs-wan.h
> - *
> - * Copyright (C) 2006 Andrew Victor
> - *
> - * KS8695 - HPNA Registers and bit definitions.
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#ifndef KS8695_HPNA_H
> -#define KS8695_HPNA_H
> -
> -#define KS8695_HPNA_OFFSET (0xF0000 + 0xA000)
> -#define KS8695_HPNA_VA (KS8695_IO_VA + KS8695_HPNA_OFFSET)
> -#define KS8695_HPNA_PA (KS8695_IO_PA + KS8695_HPNA_OFFSET)
> -
> -
> -/*
> - * HPNA registers
> - */
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/regs-lan.h b/arch/arm/mach-ks8695/regs-lan.h
> deleted file mode 100644
> index 82c5f3791afb..000000000000
> --- a/arch/arm/mach-ks8695/regs-lan.h
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -/*
> - * arch/arm/mach-ks8695/include/mach/regs-lan.h
> - *
> - * Copyright (C) 2006 Andrew Victor
> - *
> - * KS8695 - LAN Registers and bit definitions.
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#ifndef KS8695_LAN_H
> -#define KS8695_LAN_H
> -
> -#define KS8695_LAN_OFFSET (0xF0000 + 0x8000)
> -#define KS8695_LAN_VA (KS8695_IO_VA + KS8695_LAN_OFFSET)
> -#define KS8695_LAN_PA (KS8695_IO_PA + KS8695_LAN_OFFSET)
> -
> -
> -/*
> - * LAN registers
> - */
> -#define KS8695_LMDTXC (0x00) /* DMA Transmit Control */
> -#define KS8695_LMDRXC (0x04) /* DMA Receive Control */
> -#define KS8695_LMDTSC (0x08) /* DMA Transmit Start Command */
> -#define KS8695_LMDRSC (0x0c) /* DMA Receive Start Command */
> -#define KS8695_LTDLB (0x10) /* Transmit Descriptor List Base Address */
> -#define KS8695_LRDLB (0x14) /* Receive Descriptor List Base Address */
> -#define KS8695_LMAL (0x18) /* MAC Station Address Low */
> -#define KS8695_LMAH (0x1c) /* MAC Station Address High */
> -#define KS8695_LMAAL(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
> -#define KS8695_LMAAH(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
> -
> -
> -/* DMA Transmit Control Register */
> -#define LMDTXC_LMTRST (1 << 31) /* Soft Reset */
> -#define LMDTXC_LMTBS (0x3f << 24) /* Transmit Burst Size */
> -#define LMDTXC_LMTUCG (1 << 18) /* Transmit UDP Checksum Generate */
> -#define LMDTXC_LMTTCG (1 << 17) /* Transmit TCP Checksum Generate */
> -#define LMDTXC_LMTICG (1 << 16) /* Transmit IP Checksum Generate */
> -#define LMDTXC_LMTFCE (1 << 9) /* Transmit Flow Control Enable */
> -#define LMDTXC_LMTLB (1 << 8) /* Loopback mode */
> -#define LMDTXC_LMTEP (1 << 2) /* Transmit Enable Padding */
> -#define LMDTXC_LMTAC (1 << 1) /* Transmit Add CRC */
> -#define LMDTXC_LMTE (1 << 0) /* TX Enable */
> -
> -/* DMA Receive Control Register */
> -#define LMDRXC_LMRBS (0x3f << 24) /* Receive Burst Size */
> -#define LMDRXC_LMRUCC (1 << 18) /* Receive UDP Checksum check */
> -#define LMDRXC_LMRTCG (1 << 17) /* Receive TCP Checksum check */
> -#define LMDRXC_LMRICG (1 << 16) /* Receive IP Checksum check */
> -#define LMDRXC_LMRFCE (1 << 9) /* Receive Flow Control Enable */
> -#define LMDRXC_LMRB (1 << 6) /* Receive Broadcast */
> -#define LMDRXC_LMRM (1 << 5) /* Receive Multicast */
> -#define LMDRXC_LMRU (1 << 4) /* Receive Unicast */
> -#define LMDRXC_LMRERR (1 << 3) /* Receive Error Frame */
> -#define LMDRXC_LMRA (1 << 2) /* Receive All */
> -#define LMDRXC_LMRE (1 << 1) /* RX Enable */
> -
> -/* Additional Station Address High */
> -#define LMAAH_E (1 << 31) /* Address Enabled */
> -
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/regs-mem.h b/arch/arm/mach-ks8695/regs-mem.h
> deleted file mode 100644
> index 55806bc68ce3..000000000000
> --- a/arch/arm/mach-ks8695/regs-mem.h
> +++ /dev/null
> @@ -1,89 +0,0 @@
> -/*
> - * arch/arm/mach-ks8695/include/mach/regs-mem.h
> - *
> - * Copyright (C) 2006 Andrew Victor
> - *
> - * KS8695 - Memory Controller registers and bit definitions
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#ifndef KS8695_MEM_H
> -#define KS8695_MEM_H
> -
> -#define KS8695_MEM_OFFSET (0xF0000 + 0x4000)
> -#define KS8695_MEM_VA (KS8695_IO_VA + KS8695_MEM_OFFSET)
> -#define KS8695_MEM_PA (KS8695_IO_PA + KS8695_MEM_OFFSET)
> -
> -
> -/*
> - * Memory Controller Registers
> - */
> -#define KS8695_EXTACON0 (0x00) /* External I/O 0 Access Control */
> -#define KS8695_EXTACON1 (0x04) /* External I/O 1 Access Control */
> -#define KS8695_EXTACON2 (0x08) /* External I/O 2 Access Control */
> -#define KS8695_ROMCON0 (0x10) /* ROM/SRAM/Flash 1 Control Register */
> -#define KS8695_ROMCON1 (0x14) /* ROM/SRAM/Flash 2 Control Register */
> -#define KS8695_ERGCON (0x20) /* External I/O and ROM/SRAM/Flash General Register */
> -#define KS8695_SDCON0 (0x30) /* SDRAM Control Register 0 */
> -#define KS8695_SDCON1 (0x34) /* SDRAM Control Register 1 */
> -#define KS8695_SDGCON (0x38) /* SDRAM General Control */
> -#define KS8695_SDBCON (0x3c) /* SDRAM Buffer Control */
> -#define KS8695_REFTIM (0x40) /* SDRAM Refresh Timer */
> -
> -
> -/* External I/O Access Control Registers */
> -#define EXTACON_EBNPTR (0x3ff << 22) /* Last Address Pointer */
> -#define EXTACON_EBBPTR (0x3ff << 12) /* Base Pointer */
> -#define EXTACON_EBTACT (7 << 9) /* Write Enable/Output Enable Active Time */
> -#define EXTACON_EBTCOH (7 << 6) /* Chip Select Hold Time */
> -#define EXTACON_EBTACS (7 << 3) /* Address Setup Time before ECSN */
> -#define EXTACON_EBTCOS (7 << 0) /* Chip Select Time before OEN */
> -
> -/* ROM/SRAM/Flash Control Register */
> -#define ROMCON_RBNPTR (0x3ff << 22) /* Next Pointer */
> -#define ROMCON_RBBPTR (0x3ff << 12) /* Base Pointer */
> -#define ROMCON_RBTACC (7 << 4) /* Access Cycle Time */
> -#define ROMCON_RBTPA (3 << 2) /* Page Address Access Time */
> -#define ROMCON_PMC (3 << 0) /* Page Mode Configuration */
> -#define PMC_NORMAL (0 << 0)
> -#define PMC_4WORD (1 << 0)
> -#define PMC_8WORD (2 << 0)
> -#define PMC_16WORD (3 << 0)
> -
> -/* External I/O and ROM/SRAM/Flash General Register */
> -#define ERGCON_TMULT (3 << 28) /* Time Multiplier */
> -#define ERGCON_DSX2 (3 << 20) /* Data Width (External I/O Bank 2) */
> -#define ERGCON_DSX1 (3 << 18) /* Data Width (External I/O Bank 1) */
> -#define ERGCON_DSX0 (3 << 16) /* Data Width (External I/O Bank 0) */
> -#define ERGCON_DSR1 (3 << 2) /* Data Width (ROM/SRAM/Flash Bank 1) */
> -#define ERGCON_DSR0 (3 << 0) /* Data Width (ROM/SRAM/Flash Bank 0) */
> -
> -/* SDRAM Control Register */
> -#define SDCON_DBNPTR (0x3ff << 22) /* Last Address Pointer */
> -#define SDCON_DBBPTR (0x3ff << 12) /* Base Pointer */
> -#define SDCON_DBCAB (3 << 8) /* Column Address Bits */
> -#define SDCON_DBBNUM (1 << 3) /* Number of Banks */
> -#define SDCON_DBDBW (3 << 1) /* Data Bus Width */
> -
> -/* SDRAM General Control Register */
> -#define SDGCON_SDTRC (3 << 2) /* RAS to CAS latency */
> -#define SDGCON_SDCAS (3 << 0) /* CAS latency */
> -
> -/* SDRAM Buffer Control Register */
> -#define SDBCON_SDESTA (1 << 31) /* SDRAM Engine Status */
> -#define SDBCON_RBUFBDIS (1 << 24) /* Read Buffer Burst Enable */
> -#define SDBCON_WFIFOEN (1 << 23) /* Write FIFO Enable */
> -#define SDBCON_RBUFEN (1 << 22) /* Read Buffer Enable */
> -#define SDBCON_FLUSHWFIFO (1 << 21) /* Flush Write FIFO */
> -#define SDBCON_RBUFINV (1 << 20) /* Read Buffer Invalidate */
> -#define SDBCON_SDINI (3 << 16) /* SDRAM Initialization Control */
> -#define SDBCON_SDMODE (0x3fff << 0) /* SDRAM Mode Register Value Program */
> -
> -/* SDRAM Refresh Timer Register */
> -#define REFTIM_REFTIM (0xffff << 0) /* Refresh Timer Value */
> -
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/regs-pci.h b/arch/arm/mach-ks8695/regs-pci.h
> deleted file mode 100644
> index 75a9db6edbd9..000000000000
> --- a/arch/arm/mach-ks8695/regs-pci.h
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -/*
> - * arch/arm/mach-ks8695/include/mach/regs-pci.h
> - *
> - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
> - * Copyright (C) 2006 Simtec Electronics
> - *
> - * KS8695 - PCI bridge registers and bit definitions.
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#define KS8695_PCI_OFFSET (0xF0000 + 0x2000)
> -#define KS8695_PCI_VA (KS8695_IO_VA + KS8695_PCI_OFFSET)
> -#define KS8695_PCI_PA (KS8695_IO_PA + KS8695_PCI_OFFSET)
> -
> -
> -#define KS8695_CRCFID (0x000) /* Configuration: Identification */
> -#define KS8695_CRCFCS (0x004) /* Configuration: Command and Status */
> -#define KS8695_CRCFRV (0x008) /* Configuration: Revision */
> -#define KS8695_CRCFLT (0x00C) /* Configuration: Latency Timer */
> -#define KS8695_CRCBMA (0x010) /* Configuration: Base Memory Address */
> -#define KS8695_CRCSID (0x02C) /* Configuration: Subsystem ID */
> -#define KS8695_CRCFIT (0x03C) /* Configuration: Interrupt */
> -#define KS8695_PBCA (0x100) /* Bridge Configuration Address */
> -#define KS8695_PBCD (0x104) /* Bridge Configuration Data */
> -#define KS8695_PBM (0x200) /* Bridge Mode */
> -#define KS8695_PBCS (0x204) /* Bridge Control and Status */
> -#define KS8695_PMBA (0x208) /* Bridge Memory Base Address */
> -#define KS8695_PMBAC (0x20C) /* Bridge Memory Base Address Control */
> -#define KS8695_PMBAM (0x210) /* Bridge Memory Base Address Mask */
> -#define KS8695_PMBAT (0x214) /* Bridge Memory Base Address Translation */
> -#define KS8695_PIOBA (0x218) /* Bridge I/O Base Address */
> -#define KS8695_PIOBAC (0x21C) /* Bridge I/O Base Address Control */
> -#define KS8695_PIOBAM (0x220) /* Bridge I/O Base Address Mask */
> -#define KS8695_PIOBAT (0x224) /* Bridge I/O Base Address Translation */
> -
> -
> -/* Configuration: Identification */
> -
> -/* Configuration: Command and Status */
> -
> -/* Configuration: Revision */
> -
> -
> -
> -#define CFRV_GUEST (1 << 23)
> -
> -#define PBCA_TYPE1 (1)
> -#define PBCA_ENABLE (1 << 31)
> -
> -
> diff --git a/arch/arm/mach-ks8695/regs-sys.h b/arch/arm/mach-ks8695/regs-sys.h
> deleted file mode 100644
> index 57c20be0c129..000000000000
> --- a/arch/arm/mach-ks8695/regs-sys.h
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -/*
> - * arch/arm/mach-ks8695/include/mach/regs-sys.h
> - *
> - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
> - * Copyright (C) 2006 Simtec Electronics
> - *
> - * KS8695 - System control registers and bit definitions
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#ifndef KS8695_SYS_H
> -#define KS8695_SYS_H
> -
> -#define KS8695_SYS_OFFSET (0xF0000 + 0x0000)
> -#define KS8695_SYS_VA (KS8695_IO_VA + KS8695_SYS_OFFSET)
> -#define KS8695_SYS_PA (KS8695_IO_PA + KS8695_SYS_OFFSET)
> -
> -
> -#define KS8695_SYSCFG (0x00) /* System Configuration Register */
> -#define KS8695_CLKCON (0x04) /* System Clock and Bus Control Register */
> -
> -
> -/* System Configuration Register */
> -#define SYSCFG_SPRBP (0x3ff << 16) /* Register Bank Base Pointer */
> -
> -/* System Clock and Bus Control Register */
> -#define CLKCON_SFMODE (1 << 8) /* System Fast Mode for Simulation */
> -#define CLKCON_SCDC (7 << 0) /* System Clock Divider Select */
> -
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/regs-wan.h b/arch/arm/mach-ks8695/regs-wan.h
> deleted file mode 100644
> index c475bed22b8e..000000000000
> --- a/arch/arm/mach-ks8695/regs-wan.h
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -/*
> - * arch/arm/mach-ks8695/include/mach/regs-wan.h
> - *
> - * Copyright (C) 2006 Andrew Victor
> - *
> - * KS8695 - WAN Registers and bit definitions.
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> - */
> -
> -#ifndef KS8695_WAN_H
> -#define KS8695_WAN_H
> -
> -#define KS8695_WAN_OFFSET (0xF0000 + 0x6000)
> -#define KS8695_WAN_VA (KS8695_IO_VA + KS8695_WAN_OFFSET)
> -#define KS8695_WAN_PA (KS8695_IO_PA + KS8695_WAN_OFFSET)
> -
> -
> -/*
> - * WAN registers
> - */
> -#define KS8695_WMDTXC (0x00) /* DMA Transmit Control */
> -#define KS8695_WMDRXC (0x04) /* DMA Receive Control */
> -#define KS8695_WMDTSC (0x08) /* DMA Transmit Start Command */
> -#define KS8695_WMDRSC (0x0c) /* DMA Receive Start Command */
> -#define KS8695_WTDLB (0x10) /* Transmit Descriptor List Base Address */
> -#define KS8695_WRDLB (0x14) /* Receive Descriptor List Base Address */
> -#define KS8695_WMAL (0x18) /* MAC Station Address Low */
> -#define KS8695_WMAH (0x1c) /* MAC Station Address High */
> -#define KS8695_WMAAL(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
> -#define KS8695_WMAAH(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
> -
> -
> -/* DMA Transmit Control Register */
> -#define WMDTXC_WMTRST (1 << 31) /* Soft Reset */
> -#define WMDTXC_WMTBS (0x3f << 24) /* Transmit Burst Size */
> -#define WMDTXC_WMTUCG (1 << 18) /* Transmit UDP Checksum Generate */
> -#define WMDTXC_WMTTCG (1 << 17) /* Transmit TCP Checksum Generate */
> -#define WMDTXC_WMTICG (1 << 16) /* Transmit IP Checksum Generate */
> -#define WMDTXC_WMTFCE (1 << 9) /* Transmit Flow Control Enable */
> -#define WMDTXC_WMTLB (1 << 8) /* Loopback mode */
> -#define WMDTXC_WMTEP (1 << 2) /* Transmit Enable Padding */
> -#define WMDTXC_WMTAC (1 << 1) /* Transmit Add CRC */
> -#define WMDTXC_WMTE (1 << 0) /* TX Enable */
> -
> -/* DMA Receive Control Register */
> -#define WMDRXC_WMRBS (0x3f << 24) /* Receive Burst Size */
> -#define WMDRXC_WMRUCC (1 << 18) /* Receive UDP Checksum check */
> -#define WMDRXC_WMRTCG (1 << 17) /* Receive TCP Checksum check */
> -#define WMDRXC_WMRICG (1 << 16) /* Receive IP Checksum check */
> -#define WMDRXC_WMRFCE (1 << 9) /* Receive Flow Control Enable */
> -#define WMDRXC_WMRB (1 << 6) /* Receive Broadcast */
> -#define WMDRXC_WMRM (1 << 5) /* Receive Multicast */
> -#define WMDRXC_WMRU (1 << 4) /* Receive Unicast */
> -#define WMDRXC_WMRERR (1 << 3) /* Receive Error Frame */
> -#define WMDRXC_WMRA (1 << 2) /* Receive All */
> -#define WMDRXC_WMRE (1 << 0) /* RX Enable */
> -
> -/* Additional Station Address High */
> -#define WMAAH_E (1 << 31) /* Address Enabled */
> -
> -
> -#endif
> diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
> deleted file mode 100644
> index 50561eec0c32..000000000000
> --- a/arch/arm/mach-ks8695/time.c
> +++ /dev/null
> @@ -1,159 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * arch/arm/mach-ks8695/time.c
> - *
> - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
> - * Copyright (C) 2006 Simtec Electronics
> - */
> -
> -#include <linux/init.h>
> -#include <linux/interrupt.h>
> -#include <linux/irq.h>
> -#include <linux/kernel.h>
> -#include <linux/sched.h>
> -#include <linux/io.h>
> -#include <linux/clockchips.h>
> -
> -#include <asm/mach/time.h>
> -#include <asm/system_misc.h>
> -
> -#include <mach/regs-irq.h>
> -
> -#include "generic.h"
> -
> -#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
> -#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
> -#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET)
> -
> -/*
> - * Timer registers
> - */
> -#define KS8695_TMCON (0x00) /* Timer Control Register */
> -#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */
> -#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
> -#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */
> -#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */
> -
> -/* Timer Control Register */
> -#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */
> -#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
> -
> -/* Timer0 Timeout Counter Register */
> -#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
> -
> -static int ks8695_set_periodic(struct clock_event_device *evt)
> -{
> - u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ);
> - u32 half = DIV_ROUND_CLOSEST(rate, 2);
> - u32 tmcon;
> -
> - /* Disable timer 1 */
> - tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
> - tmcon &= ~TMCON_T1EN;
> - writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
> -
> - /* Both registers need to count down */
> - writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
> - writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
> -
> - /* Re-enable timer1 */
> - tmcon |= TMCON_T1EN;
> - writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
> - return 0;
> -}
> -
> -static int ks8695_set_next_event(unsigned long cycles,
> - struct clock_event_device *evt)
> -
> -{
> - u32 half = DIV_ROUND_CLOSEST(cycles, 2);
> - u32 tmcon;
> -
> - /* Disable timer 1 */
> - tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
> - tmcon &= ~TMCON_T1EN;
> - writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
> -
> - /* Both registers need to count down */
> - writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC);
> - writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD);
> -
> - /* Re-enable timer1 */
> - tmcon |= TMCON_T1EN;
> - writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
> -
> - return 0;
> -}
> -
> -static struct clock_event_device clockevent_ks8695 = {
> - .name = "ks8695_t1tc",
> - /* Reasonably fast and accurate clock event */
> - .rating = 300,
> - .features = CLOCK_EVT_FEAT_ONESHOT |
> - CLOCK_EVT_FEAT_PERIODIC,
> - .set_next_event = ks8695_set_next_event,
> - .set_state_periodic = ks8695_set_periodic,
> -};
> -
> -/*
> - * IRQ handler for the timer.
> - */
> -static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id)
> -{
> - struct clock_event_device *evt = &clockevent_ks8695;
> -
> - evt->event_handler(evt);
> - return IRQ_HANDLED;
> -}
> -
> -static struct irqaction ks8695_timer_irq = {
> - .name = "ks8695_tick",
> - .flags = IRQF_TIMER,
> - .handler = ks8695_timer_interrupt,
> -};
> -
> -static void ks8695_timer_setup(void)
> -{
> - unsigned long tmcon;
> -
> - /* Disable timer 0 and 1 */
> - tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
> - tmcon &= ~TMCON_T0EN;
> - tmcon &= ~TMCON_T1EN;
> - writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON);
> -
> - /*
> - * Use timer 1 to fire IRQs on the timeline, minimum 2 cycles
> - * (one on each counter) maximum 2*2^32, but the API will only
> - * accept up to a 32bit full word (0xFFFFFFFFU).
> - */
> - clockevents_config_and_register(&clockevent_ks8695,
> - KS8695_CLOCK_RATE, 2,
> - 0xFFFFFFFFU);
> -}
> -
> -void __init ks8695_timer_init(void)
> -{
> - ks8695_timer_setup();
> -
> - /* Enable timer interrupts */
> - setup_irq(KS8695_IRQ_TIMER1, &ks8695_timer_irq);
> -}
> -
> -void ks8695_restart(enum reboot_mode reboot_mode, const char *cmd)
> -{
> - unsigned int reg;
> -
> - if (reboot_mode == REBOOT_SOFT)
> - soft_restart(0);
> -
> - /* disable timer0 */
> - reg = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON);
> - writel_relaxed(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
> -
> - /* enable watchdog mode */
> - writel_relaxed((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
> -
> - /* re-enable timer0 */
> - writel_relaxed(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
> -}
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index 820b60a50125..05143ec47d94 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -106,7 +106,7 @@ config CPU_ARM922T
> help
> The ARM922T is a version of the ARM920T, but with smaller
> instruction and data caches. It is used in Altera's
> - Excalibur XA device family and Micrel's KS8695 Centaur.
> + Excalibur XA device family and the ARM Integrator.
>
> Say Y if you want support for the ARM922T processor.
> Otherwise, say N.
>

\
 
 \ /
  Last update: 2019-08-12 06:00    [W:0.406 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site