Messages in this thread Patch in this message | | | From | Martin Kaiser <> | Subject | [PATCH 7/8] ARM: dts: apf27dev: native-mode is part of display-timings | Date | Thu, 1 Aug 2019 17:46:27 +0200 |
| |
Move the native-mode property inside the display-timings node.
According to Documentation/devicetree/bindings/display/panel/display-timing.txt. native-mode is a property of the display-timings node.
If it's located outside of display-timings, the native-mode setting is ignored and the first display timing is used (which is a problem only if someone adds another display timing).
Signed-off-by: Martin Kaiser <martin@kaiser.cx> --- arch/arm/boot/dts/imx27-apf27dev.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index 087c6e237af0..6f1e8ce9e76e 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -12,10 +12,10 @@ display: display { model = "Chimei-LW700AT9003"; - native-mode = <&timing0>; bits-per-pixel = <16>; /* non-standard but required */ fsl,pcr = <0xfae80083>; /* non-standard but required */ display-timings { + native-mode = <&timing0>; timing0: 800x480 { clock-frequency = <33000033>; hactive = <800>; -- 2.11.0
| |