lkml.org 
[lkml]   [2019]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 2/2] dt-bindings: mtd: Document Macronix raw NAND controller bindings
Hi Mason,

masonccyang@mxic.com.tw wrote on Thu, 1 Aug 2019 17:32:04 +0800:

> Hi Miquel,
>
> > > Document the bindings used by the Macronix raw NAND controller.
> > >
> > > Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> > > ---
> > > Documentation/devicetree/bindings/mtd/mxic-nand.txt | 19
> +++++++++++++++++++
> > > 1 file changed, 19 insertions(+)
> > > create mode 100644
> Documentation/devicetree/bindings/mtd/mxic-nand.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/
> > Documentation/devicetree/bindings/mtd/mxic-nand.txt
> > > new file mode 100644
> > > index 0000000..de37d60
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt
> > > @@ -0,0 +1,19 @@
> > > +Macronix Raw NAND Controller Device Tree Bindings
> > > +-------------------------------------------------
> > > +
> > > +Required properties:
> > > +- compatible: should be "mxicy,multi-itfc-v009-nand-morph"
> > > +- reg: should contain 1 entry for the registers
> > > +- interrupts: interrupt line connected to this raw NAND controller
> > > +- clock-names: should contain "ps", "send" and "send_dly"
> > > +- clocks: should contain 3 phandles for the "ps", "send" and
> > > + "send_dly" clocks
> > > +
> > > +Example:
> > > +
> > > + nand: nand-controller@43c30000 {
> > > + compatible = "mxicy,multi-itfc-v009-nand-morph";
> >
> > "mxicy" looks strange to me, I know it has been used in the past and
> > cannot be removed, but I don't think it is wise to continue using it
> > while your use "mxic" in all your other contributions. I would update
> > the prefix to mxic here and fill-in the relevant doc.
> >
> > Also, what is nand-morph? I thought we were okay for
> > the "-nand-controller" suffix.
> >
>
> I thought there is a node name "nand-controller@43c30000" and the
> "-nand-controller" suffix in compatible property seems repeated.

It is repeated because it won't be used the same way. The node name
will only be relevant in the DT itself (to reference a node for
instance). I will also appear in the sysfs.

The compatibles are listed in drivers and "given" to the kernel core so
that the device-driver association can take place.

>
> In addition, I would like to indicate it's a multi function controller.
>
> nand-morph means this multi interface controller (multi-itfc) works in
> raw NAND controller.

I think this is clear as you already put "multi-itfc" in the name. If
you want you can switch to "morph" in the prefix, but I want the suffix
to be "-nand-controller".

Thanks,
Miquèl

\
 
 \ /
  Last update: 2019-08-01 11:37    [W:0.030 / U:1.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site