lkml.org 
[lkml]   [2019]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] powerpc: Support CMDLINE_EXTEND
From
Date


Le 30/07/2019 à 23:10, Chris Packham a écrit :
> Hi Christophe,
>
> On Tue, 2019-07-30 at 09:02 +0200, Christophe Leroy wrote:
>>
>> Le 24/07/2019 à 07:33, Chris Packham a écrit :
>>>
>>> Device tree aware platforms can make use of CMDLINE_EXTEND to
>>> extend the
>>> kernel command line provided by the bootloader. This is
>>> particularly
>>> useful to set parameters for built-in modules that would otherwise
>>> be
>>> done at module insertion. Add support for this in the powerpc
>>> architecture.
>>>
>>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>>> ---
>>>   arch/powerpc/Kconfig | 12 ++++++++++++
>> I think you also have to implement some stuff in
>> early_cmdline_parse()
>> in arch/powerpc/kernel/prom_init.c
>
> I my case I didn't need to since the generic code in drivers/of/fdt.c
> did what I need. For early options or platforms that don't use a device
> tree then I can see why I'd need the update to update to prom_init.
>
>>
>> Maybe look at https://patchwork.ozlabs.org/patch/1074126/
>>
>
> Do you mind if I take this and fold it into a v2 of my patch? Any
> particular reason it didn't get picked up in April?

Sure, take it, I don't mind.

Two reasons it was not picked up in April I believe:
- It was part of a larger series
(https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=100518)
and was intended to challenge the series proposed by Daniel
(https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=98106)
but nothing happened.
- It was conflicting with the ongoing changes for implementing KASAN.

What you will have to do is to define prom_strlcat() in the same spirit
as https://patchwork.ozlabs.org/patch/1091621/ by copying it from
lib/string.c and I think you'll be able to drop prom_strlcpy() as that
function what only used there.

Christophe

>
>> Christophe
>>
>>>
>>>   1 file changed, 12 insertions(+)
>>>
>>> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
>>> index d8dcd8820369..cd9b3974aa36 100644
>>> --- a/arch/powerpc/Kconfig
>>> +++ b/arch/powerpc/Kconfig
>>> @@ -851,6 +851,11 @@ config CMDLINE
>>>      some command-line options at build time by entering
>>> them here.  In
>>>      most cases you will need to specify the root device
>>> here.
>>>
>>> +choice
>>> + prompt "Kernel command line type" if CMDLINE != ""
>>> + default CMDLINE_FORCE
>>> + depends on CMDLINE_BOOL
>>> +
>>>   config CMDLINE_FORCE
>>>    bool "Always use the default kernel command string"
>>>    depends on CMDLINE_BOOL
>>> @@ -860,6 +865,13 @@ config CMDLINE_FORCE
>>>      This is useful if you cannot or don't want to change
>>> the
>>>      command-line options your boot loader passes to the
>>> kernel.
>>>
>>> +config CMDLINE_EXTEND
>>> + bool "Extend bootloader kernel arguments"
>>> + help
>>> +   The command-line arguments provided by the boot loader
>>> will be
>>> +   appended to the default kernel command string.
>>> +endchoice
>>> +
>>>   config EXTRA_TARGETS
>>>    string "Additional default image types"
>>>    help

\
 
 \ /
  Last update: 2019-07-31 09:24    [W:0.111 / U:0.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site