lkml.org 
[lkml]   [2019]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [External Email] Re: [PATCH v1 0/2] virtio-mmio: support multiple interrupt vectors
On Wed, Jul 31, 2019 at 4:26 AM Michael S. Tsirkin <mst@redhat.com> wrote:
>
> On Mon, Jul 22, 2019 at 09:43:18PM +0800, 李菲 wrote:
> > On Mon, Jul 22, 2019 at 4:39 PM Michael S. Tsirkin <mst@redhat.com> wrote:
> > >
> > > On Mon, Jul 22, 2019 at 11:22:02AM +0800, 李菲 wrote:
> > > > On Fri, Jul 19, 2019 at 11:14 PM Michael S. Tsirkin <mst@redhat.com> wrote:
> > > > >
> > > > > On Fri, Jul 19, 2019 at 09:31:33PM +0800, Fei Li wrote:
> > > > > > Hi,
> > > > > >
> > > > > > This patch series implements multiple interrupt vectors support for
> > > > > > virtio-mmio device. This is especially useful for multiqueue vhost-net
> > > > > > device when using firecracker micro-vms as the guest.
> > > > > >
> > > > > > Test result:
> > > > > > With 8 vcpus & 8 net queues set, one vhost-net device with 8 irqs can
> > > > > > receive 9 times more pps comparing with only one irq:
> > > > > > - 564830.38 rxpck/s for 8 irqs on
> > > > > > - 67665.06 rxpck/s for 1 irq on
> > > > > >
> > > > > > Please help to review, thanks!
> > > > > >
> > > > > > Have a nice day
> > > > > > Fei
> > > > >
> > > > >
> > > > > Interesting. The spec says though:
> > > > >
> > > > > 4.2.3.4
> > > > > Notifications From The Device
> > > > > The memory mapped virtio device is using a single, dedicated interrupt signal, which is asserted when at
> > > > > least one of the bits described in the description of InterruptStatus is set. This is how the device sends a
> > > > > used buffer notification or a configuration change notification to the device.
> > > > >
> > > > Yes, the spec needs to be updated if we want to use mult-irqs.
> > > > >
> > > > > So I'm guessing we need to change the host/guest interface?
> > > > Just to confirm, does the "the host/guest interface" you mentioned mean how to
> > > > pass the irq information from the user space tool to guest kernel?
> > > > In this patch, we do this by passing the [irq_start, irq_end]
> > > > interface via setting guest
> > > > kernel command line, that is done in vm_cmdline_set().
> > > > Also there is another way to do this: add two new registers describing irq info
> > > > (irq_start & irq_end OR irq_start & irq_numbers) to the virtio config space.
> > > >
> > > > Which one do you prefer?
> > >
> > > I'm not sure - so far irq was passed on the command line, right?
> > Yes.
> > >
> > > The first step in implementing any spec change would be to update qemu
> > > code to virtio 1. Which is not a huge project but so far no one
> > > bothered.
> > Emm, actually I only did the test with using firecracker to start a
> > micro-vm, but without qemu.
> > To be honest, the reason why implementing multi-irq on virtio-mmio is
> > mainly because the
> > current firecracker using virtio-mmio device and it has no pci thing,
> > thus no msi/msix to
> > handle the interruptions.
> > On the other hand, considering pci is well supported in qemu, I am
> > wondering whether we
> > still need this. If needed, we would like to do this. :)
> >
> > Have a nice day, thanks
> > Fei
>
>
> Sergio Lopez is now working on updating mmio to v1 support in qemu.
> Maybe get in touch with him on how he looks at this extension.
Thanks for the info! :)

Hi Sergio Lopez,
I saw your [virtio-mmio: modern (v2)] patch series in Qemu mailing
list, thanks for moving this on.
And long Story Short, these two kernel patches is to add the multi-irq
support for virtio-mmio driver.
As this involves the spec change and you are now implementing
virtio-mmio v2, could you help to
give some suggestions on this extension?
I will cc you the original patch soon, thanks.

> Not asking you to work on qemu, but it makes sense
> to get an ack for guest bits from another popular hypervisor.
I agree, absolutely right. And I once work on Qemu development, hope
the combined
background could help to move this multi-irq feature forward. :)


Have a nice day, many thanks
Fei
>
>
> > >
> > >
> > > > > If true pls cc virtio-dev.
> > > > Sure.
> > > > >
> > > > > Also, do we need to update dt bindings documentation?
> > > > You mean the following doc? Sure. :)
> > > > https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/virtio/mmio.txt
> > > >
> > > > Thanks for the review!
> > > >
> > > > Have a nice day
> > > > Fei
> > > >
> > > >
> > > > >
> > > > > >
> > > > > > Fam Zheng (1):
> > > > > > virtio-mmio: Process vrings more proactively
> > > > > >
> > > > > > Fei Li (1):
> > > > > > virtio-mmio: support multiple interrupt vectors
> > > > > >
> > > > > > drivers/virtio/virtio_mmio.c | 238 +++++++++++++++++++++++++++++++++++--------
> > > > > > 1 file changed, 196 insertions(+), 42 deletions(-)
> > > > > >
> > > > > > --
> > > > > > 2.11.0

\
 
 \ /
  Last update: 2019-07-31 06:05    [W:0.058 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site