lkml.org 
[lkml]   [2019]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.
From
Date
Hi Amit,
Thanks for the review.

On 07/30/2019 08:43 AM, Amit Kucheria wrote:
> On Mon, Jul 29, 2019 at 10:03 PM Thara Gopinath
> <thara.gopinath@linaro.org> wrote:
>>
>> The AOSS QMP driver is extended to communicate with the additional
>> resources. These resources are then registered as cooling devices
>> with the thermal framework.
>>
>> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
>> ---
>> drivers/soc/qcom/qcom_aoss.c | 129 +++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 129 insertions(+)
>>
>> diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
>> index 5f88519..010877e 100644
>> --- a/drivers/soc/qcom/qcom_aoss.c
>> +++ b/drivers/soc/qcom/qcom_aoss.c
>> @@ -10,6 +10,8 @@
>> #include <linux/module.h>
>> #include <linux/platform_device.h>
>> #include <linux/pm_domain.h>
>> +#include <linux/thermal.h>
>> +#include <linux/slab.h>
>>
>> #define QMP_DESC_MAGIC 0x0
>> #define QMP_DESC_VERSION 0x4
>> @@ -40,6 +42,16 @@
>> /* 64 bytes is enough to store the requests and provides padding to 4 bytes */
>> #define QMP_MSG_LEN 64
>>
>> +#define QMP_NUM_COOLING_RESOURCES 2
>> +
>> +static bool qmp_cdev_init_state = 1;
>> +
>> +struct qmp_cooling_device {
>> + struct thermal_cooling_device *cdev;
>> + struct qmp *qmp;
>> + bool state;
>> +};
>> +
>> /**
>> * struct qmp - driver state for QMP implementation
>> * @msgram: iomem referencing the message RAM used for communication
>> @@ -69,6 +81,7 @@ struct qmp {
>>
>> struct clk_hw qdss_clk;
>> struct genpd_onecell_data pd_data;
>> + struct qmp_cooling_device *cooling_devs;
>> };
>>
>> struct qmp_pd {
>> @@ -385,6 +398,117 @@ static void qmp_pd_remove(struct qmp *qmp)
>> pm_genpd_remove(data->domains[i]);
>> }
>>
>> +static int qmp_cdev_get_max_state(struct thermal_cooling_device *cdev,
>> + unsigned long *state)
>> +{
>> + *state = qmp_cdev_init_state;
>> + return 0;
>> +}
>> +
>> +static int qmp_cdev_get_cur_state(struct thermal_cooling_device *cdev,
>> + unsigned long *state)
>> +{
>> + struct qmp_cooling_device *qmp_cdev = cdev->devdata;
>> +
>> + *state = qmp_cdev->state;
>> + return 0;
>> +}
>> +
>> +static int qmp_cdev_set_cur_state(struct thermal_cooling_device *cdev,
>> + unsigned long state)
>> +{
>> + struct qmp_cooling_device *qmp_cdev = cdev->devdata;
>> + char buf[QMP_MSG_LEN] = {};
>> + bool cdev_state;
>> + int ret;
>> +
>> + /* Normalize state */
>> + cdev_state = !!state;
>> +
>> + if (qmp_cdev->state == state)
>> + return 0;
>> +
>> + snprintf(buf, sizeof(buf),
>> + "{class: volt_flr, event:zero_temp, res:%s, value:%s}",
>> + qmp_cdev->name,
>
> This won't compile, there is no member "name" in qmp_cooling_device.

Yes! Sorry about that. I must have send this from the wrong folder. I
have fixed this and send out another version. Also taken care of the
other comment below.

Regards
Thara
>
>> + cdev_state ? "off" : "on");
>> +
>> + ret = qmp_send(qmp_cdev->qmp, buf, sizeof(buf));
>> +
>> + if (!ret)
>> + qmp_cdev->state = cdev_state;
>> +
>> + return ret;
>> +}
>> +
>> +static struct thermal_cooling_device_ops qmp_cooling_device_ops = {
>> + .get_max_state = qmp_cdev_get_max_state,
>> + .get_cur_state = qmp_cdev_get_cur_state,
>> + .set_cur_state = qmp_cdev_set_cur_state,
>> +};
>> +
>> +static int qmp_cooling_device_add(struct qmp *qmp,
>> + struct qmp_cooling_device *qmp_cdev,
>> + struct device_node *node)
>> +{
>> + char *cdev_name = (char *)node->name;
>> +
>> + qmp_cdev->qmp = qmp;
>> + qmp_cdev->state = qmp_cdev_init_state;
>> + qmp_cdev->cdev = devm_thermal_of_cooling_device_register
>> + (qmp->dev, node,
>> + cdev_name,
>> + qmp_cdev, &qmp_cooling_device_ops);
>> +
>> + if (IS_ERR(qmp_cdev->cdev))
>> + dev_err(qmp->dev, "unable to register %s cooling device\n",
>> + cdev_name);
>> +
>> + return PTR_ERR_OR_ZERO(qmp_cdev->cdev);
>> +}
>> +
>> +static int qmp_cooling_devices_register(struct qmp *qmp)
>> +{
>> + struct device_node *np, *child;
>> + int count = QMP_NUM_COOLING_RESOURCES;
>> + int ret;
>> +
>> + np = qmp->dev->of_node;
>> +
>> + qmp->cooling_devs = devm_kcalloc(qmp->dev, count,
>> + sizeof(*qmp->cooling_devs),
>> + GFP_KERNEL);
>> +
>> + if (!qmp->cooling_devs)
>> + return -ENOMEM;
>> +
>> + for_each_available_child_of_node(np, child) {
>> + if (!of_find_property(child, "#cooling-cells", NULL))
>> + continue;
>> + ret = qmp_cooling_device_add(qmp, &qmp->cooling_devs[count++],
>> + child);
>> + if (ret)
>> + goto uroll_cooling_devices;
>
> unroll?
>
>> + }
>> +
>> + return 0;
>> +
>> +uroll_cooling_devices:
>> + while (--count >= 0)
>> + thermal_cooling_device_unregister
>> + (qmp->cooling_devs[count].cdev);
>> +
>> + return ret;
>> +}
>> +
>> +static void qmp_cooling_devices_remove(struct qmp *qmp)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < QMP_NUM_COOLING_RESOURCES; i++)
>> + thermal_cooling_device_unregister(qmp->cooling_devs[i].cdev);
>> +}
>> +
>> static int qmp_probe(struct platform_device *pdev)
>> {
>> struct resource *res;
>> @@ -433,6 +557,10 @@ static int qmp_probe(struct platform_device *pdev)
>> if (ret)
>> goto err_remove_qdss_clk;
>>
>> + ret = qmp_cooling_devices_register(qmp);
>> + if (ret)
>> + dev_err(&pdev->dev, "failed to register aoss cooling devices\n");
>> +
>> platform_set_drvdata(pdev, qmp);
>>
>> return 0;
>> @@ -453,6 +581,7 @@ static int qmp_remove(struct platform_device *pdev)
>>
>> qmp_qdss_clk_remove(qmp);
>> qmp_pd_remove(qmp);
>> + qmp_cooling_devices_remove(qmp);
>>
>> qmp_close(qmp);
>> mbox_free_channel(qmp->mbox_chan);
>> --
>> 2.1.4
>>

\
 
 \ /
  Last update: 2019-07-30 17:28    [W:0.089 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site