lkml.org 
[lkml]   [2019]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/4] csky: Add dma_inv_range for DMA_FROM_DEVICE
On Tue, Jul 30, 2019 at 5:11 PM Guo Ren <guoren@kernel.org> wrote:
> > > diff --git a/arch/csky/mm/dma-mapping.c b/arch/csky/mm/dma-mapping.c
> > > cache_op(paddr, size, dma_wb_range);
> > > break;
> > > case DMA_FROM_DEVICE:
> > > + cache_op(paddr, size, dma_inv_range);
> > > + break;
> > > case DMA_BIDIRECTIONAL:
> > > cache_op(paddr, size, dma_wbinv_range);
> > > break;
> >
> > When syncing 'for_cpu', you should not need to write back, because
> > there won't be any dirty cache lines.
>
> I just follow the dma_data_direction param, seems dir param and
> function are a little bit duplicated. And our cpu won't clear clean
> cache line into memory, so dma_wb_page won't cause problem.
> Seems arch_sync_dma_for_cpu with dir=DMA_TO_DEVICE is
> self-contradictory.

Right, you generally don't need to do cache management for that
combination.

There might be other things to do here though, e.g. with a strict
iommu implementation one could tear down the i/o page table
entry to prevent the device from accessing a buffer while that is
owned by the cpu.

> Do you want me modfiy like these:
> @@ -88,6 +90,8 @@ void arch_sync_dma_for_cpu(struct device *dev,
> phys_addr_t paddr,
> case DMA_TO_DEVICE:
> case DMA_FROM_DEVICE:
> case DMA_BIDIRECTIONAL:
> cache_op(paddr, size, dma_inv_range);
> break;
>
> @@ -72,6 +72,8 @@ void arch_sync_dma_for_device(struct device *dev,
> phys_addr_t paddr,
> case DMA_TO_DEVICE:
> cache_op(paddr, size, dma_wb_range);
> break;
> case DMA_FROM_DEVICE:
> case DMA_BIDIRECTIONAL:
> cache_op(paddr, size, dma_wbinv_range);
> break;
>
> >
> > If you have a CPU core that does not do speculative loads, you also don't
> > need to invalidate here, because you have already done that in the
> > _for_device() case, the only reason to invalidate the CPU cache
> > again is if a speculative load created a stale cache line that now
> > shadows the data received from the device.
> Our CPU support speculative loads :)

Ok, then you both invalidations are indeed needed.
I was guessing that CK610 had no speculation.

Arnd

\
 
 \ /
  Last update: 2019-07-30 17:22    [W:0.056 / U:2.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site