lkml.org 
[lkml]   [2019]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 07/10] powerpc/fsl_booke/32: randomize the kernel image offset
From
Date


Le 30/07/2019 à 09:42, Jason Yan a écrit :
> After we have the basic support of relocate the kernel in some
> appropriate place, we can start to randomize the offset now.
>
> Entropy is derived from the banner and timer, which will change every
> build and boot. This not so much safe so additionally the bootloader may
> pass entropy via the /chosen/kaslr-seed node in device tree.
>
> We will use the first 512M of the low memory to randomize the kernel
> image. The memory will be split in 64M zones. We will use the lower 8
> bit of the entropy to decide the index of the 64M zone. Then we chose a
> 16K aligned offset inside the 64M zone to put the kernel in.
>
> KERNELBASE
>
> |--> 64M <--|
> | |
> +---------------+ +----------------+---------------+
> | |....| |kernel| | |
> +---------------+ +----------------+---------------+
> | |
> |-----> offset <-----|
>
> kimage_vaddr
>
> We also check if we will overlap with some areas like the dtb area, the
> initrd area or the crashkernel area. If we cannot find a proper area,
> kaslr will be disabled and boot from the original kernel.
>
> Signed-off-by: Jason Yan <yanaijie@huawei.com>
> Cc: Diana Craciun <diana.craciun@nxp.com>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: Christophe Leroy <christophe.leroy@c-s.fr>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Paul Mackerras <paulus@samba.org>
> Cc: Nicholas Piggin <npiggin@gmail.com>
> Cc: Kees Cook <keescook@chromium.org>
> ---
> arch/powerpc/kernel/kaslr_booke.c | 334 +++++++++++++++++++++++++++++-
> 1 file changed, 332 insertions(+), 2 deletions(-)
>
> diff --git a/arch/powerpc/kernel/kaslr_booke.c b/arch/powerpc/kernel/kaslr_booke.c
> index 960bce4aa8b9..0bb02e45b928 100644
> --- a/arch/powerpc/kernel/kaslr_booke.c
> +++ b/arch/powerpc/kernel/kaslr_booke.c
> @@ -23,6 +23,8 @@
> #include <linux/delay.h>
> #include <linux/highmem.h>
> #include <linux/memblock.h>
> +#include <linux/libfdt.h>
> +#include <linux/crash_core.h>
> #include <asm/pgalloc.h>
> #include <asm/prom.h>
> #include <asm/io.h>
> @@ -34,15 +36,341 @@
> #include <asm/machdep.h>
> #include <asm/setup.h>
> #include <asm/paca.h>
> +#include <asm/kdump.h>
> #include <mm/mmu_decl.h>
> +#include <generated/compile.h>
> +#include <generated/utsrelease.h>
> +
> +#ifdef DEBUG
> +#define DBG(fmt...) printk(KERN_ERR fmt)
> +#else
> +#define DBG(fmt...)
> +#endif
> +
> +struct regions {
> + unsigned long pa_start;
> + unsigned long pa_end;
> + unsigned long kernel_size;
> + unsigned long dtb_start;
> + unsigned long dtb_end;
> + unsigned long initrd_start;
> + unsigned long initrd_end;
> + unsigned long crash_start;
> + unsigned long crash_end;
> + int reserved_mem;
> + int reserved_mem_addr_cells;
> + int reserved_mem_size_cells;
> +};
>
> extern int is_second_reloc;
>
> +/* Simplified build-specific string for starting entropy. */
> +static const char build_str[] = UTS_RELEASE " (" LINUX_COMPILE_BY "@"
> + LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION;
> +
> +static __init void kaslr_get_cmdline(void *fdt)
> +{
> + const char *cmdline = CONFIG_CMDLINE;
> + if (!IS_ENABLED(CONFIG_CMDLINE_FORCE)) {
> + int node;
> + const u8 *prop;
> + node = fdt_path_offset(fdt, "/chosen");
> + if (node < 0)
> + goto out;
> +
> + prop = fdt_getprop(fdt, node, "bootargs", NULL);
> + if (!prop)
> + goto out;
> + cmdline = prop;
> + }
> +out:
> + strscpy(boot_command_line, cmdline, COMMAND_LINE_SIZE);

boot_command_line is set by early_init_devtree() in
arch/powerpc/kernel/prom.c
Is that too late for you ?

If so, what about calling early_init_dt_scan_chosen() instead of recoding ?

Christophe

\
 
 \ /
  Last update: 2019-07-30 11:45    [W:0.085 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site