lkml.org 
[lkml]   [2019]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/7] media: vimc: Add a V4L2 output device
From
Date
On 7/13/19 7:03 AM, Hans Verkuil wrote:
> On 7/12/19 5:38 PM, André Almeida wrote:
>> Hello,
>>
>> On 7/10/19 4:33 AM, Hans Verkuil wrote:
>>> On 7/10/19 12:19 AM, Helen Koike wrote:
>>>> Hi André,
>>>>
>>>> Thanks for the patches.
>>>>
>>>> On 7/2/19 12:47 PM, André Almeida wrote:
>>>>> Hello,
>>>>>
>>>>> This patch adds a V4L2 output device on vimc, that comply with V4L2 API
>>>>> for video output. If there is an output device and a capture device at the
>>>>> same pipeline, one can get a video loopback pipeline feeding frames at
>>>>> the output and then seeing them at the capture. It's possible to insert
>>>>> vimc submodules at the pipeline to modify the image (e.g. a scaler).
>>>>>
>>>>> If one starts a streaming at the capture, with the output off, the
>>>>> capture will display a noisy frame. If one starts a streaming at the
>>>>> output with the capture off, the output will just consume the buffers,
>>>>> without sending them to the pipeline. If both output and capture are
>>>>> streaming, the loopback will happen.
>>>> I understand why it is done like this in vivid, but I was wondering, if we
>>>> have a pipeline like:
>>>> output -> capture
>>>> Shouldn't streaming from the capture just stalls if there is no frame
>>>> available in the output (i.e. streaming in the output is off) ? But then I'm
>>>> not sure what the framerate in the capture would mean.
>>>>
>>>> Hans, what do you think?
>>> If you set up the pipeline like this:
>>>
>>> Video Output -> Scaler -> Video Capture
>>
>> If the capture will stall if there's no frame from the video output, how
>> can I add support for this kind of pipeline at test-media? It would be
>> required to send frames to the output device while running
>> `v4l2-compliance` at the capture device to make testing possible.
>
> The compliance test doesn't support such devices at the moment.

The implementation of the expected behavior can be found here:
https://gitlab.collabora.com/tonyk/linux/tree/vimc/output-v2

>
> I think a new option (or options) are needed to tell the compliance test
> that the capture and output video devices together constitute an m2m device.

I've reading the v4l-utils code base and I had a look at both m2m tests
and capture/output tests, but I'm not sure how to implement this new
option. How do you think it should be implemented? Should it resemble
how v4l2-compliance tests vim2m? Something like this:

v4l2-compliance -m platform:vim2m -z platform:vivid-002 -e
vivid-002-vid-cap -s10 -P -a

Thanks,
André

>
> Regards,
>
> Hans
>
>>
>> Thanks,
>>     André
>>
>>> Then this is a mem2mem device (except with two separate video devices) and
>>> framerate doesn't apply anymore. And video capture will just stall if there
>>> is no video output frame provided.
>>>
>>> It's how e.g. omap3isp works.
>>>
>>> Regards,
>>>
>>> Hans
>>>
>>>> Thanks,
>>>> Helen
>>>>
>>>>> The patches 1 and 2 provide some ground to create the output
>>>>> device. The patch 3 creates the device and modify how the vimc-streamer
>>>>> was dealing with the s_stream callback on other vimc modules, to make
>>>>> simpler implementing this callback at vimc-output. Patch 4 change the
>>>>> behavior of the pipeline in order to be closer to a real life hardware.
>>>>> Patches 5-7 updates the default pipeline and the documentation to
>>>>> include the new output device.
>>>>>
>>>>> This is the result of v4l2-compliance after this patch series:
>>>>> $ v4l2-compliance -m0 -s50
>>>>> Grand Total for vimc device /dev/media0: 476, Succeeded: 476, Failed: 0,
>>>>> Warnings: 0
>>>>>
>>>>> A git tree up to date with media-master and with this changes can be found
>>>>> at: https://gitlab.collabora.com/tonyk/linux/tree/vimc/output
>>>>>
>>>>> In order to test it, one can follow these instructions:
>>>>>
>>>>> 1 - Configure the pipeline (requires v4l-utils):
>>>>>
>>>>> $ media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
>>>>> $ media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
>>>>> $ media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
>>>>> $ media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
>>>>> $ v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
>>>>> $ v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
>>>>> $ v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81
>>>>> $ v4l2-ctl -z platform:vimc -e "RGB/YUV Input" -v width=640,height=480
>>>>>
>>>>> 2 - Use a userspace application:
>>>>> 2.a gst-launch (requires gstreamer and gst-plugins-good):
>>>>>
>>>>> Feed frames into the output and grab from the capture (rescaled for
>>>>> convenience):
>>>>>
>>>>> $ gst-launch-1.0 videotestsrc pattern=ball ! \
>>>>> video/x-raw,width=640,height=480,format=RGB \
>>>>> ! v4l2sink device=/dev/video2 v4l2src device=/dev/video3 ! \
>>>>> video/x-raw,width=1920,height=1440,format=RGB ! videoscale ! \
>>>>> video/x-raw,width=640,height=480 ! videoconvert ! ximagesink
>>>>>
>>>>> 2.b qv4l2 (requires v4l-utils):
>>>>>
>>>>> Open the output device:
>>>>>
>>>>> $ qv4l2 -d2
>>>>>
>>>>> Open the capture device:
>>>>>
>>>>> $ qv4l2 -d3
>>>>>
>>>>> Start the streaming at both, at any order. You can change the frame
>>>>> content at "Test Pattern Generator" -> "Test Pattern" on the output.
>>>>>
>>>>> Thanks,
>>>>> André
>>>>>
>>>>> André Almeida (7):
>>>>> media: vimc: Create video module
>>>>> media: vimc: video: Add write file operation
>>>>> media: vimc: Create a V4L2 output device
>>>>> media: vimc: Send null buffer through the pipeline
>>>>> media: vimc: core: Add output device on the pipeline
>>>>> media: vimc.dot: Update default topology diagram
>>>>> media: vimc.rst: Add output device
>>>>>
>>>>> Documentation/media/v4l-drivers/vimc.dot | 4 +-
>>>>> Documentation/media/v4l-drivers/vimc.rst | 12 +-
>>>>> drivers/media/platform/vimc/Makefile | 4 +-
>>>>> drivers/media/platform/vimc/vimc-capture.c | 356 +++----------------
>>>>> drivers/media/platform/vimc/vimc-common.h | 5 +-
>>>>> drivers/media/platform/vimc/vimc-core.c | 7 +-
>>>>> drivers/media/platform/vimc/vimc-debayer.c | 14 +-
>>>>> drivers/media/platform/vimc/vimc-output.c | 362 ++++++++++++++++++++
>>>>> drivers/media/platform/vimc/vimc-scaler.c | 13 +-
>>>>> drivers/media/platform/vimc/vimc-sensor.c | 10 +-
>>>>> drivers/media/platform/vimc/vimc-streamer.c | 24 +-
>>>>> drivers/media/platform/vimc/vimc-video.c | 273 +++++++++++++++
>>>>> drivers/media/platform/vimc/vimc-video.h | 130 +++++++
>>>>> 13 files changed, 849 insertions(+), 365 deletions(-)
>>>>> create mode 100644 drivers/media/platform/vimc/vimc-output.c
>>>>> create mode 100644 drivers/media/platform/vimc/vimc-video.c
>>>>> create mode 100644 drivers/media/platform/vimc/vimc-video.h
>>>>>
>

\
 
 \ /
  Last update: 2019-07-31 05:02    [W:0.107 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site