lkml.org 
[lkml]   [2019]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: aspeed: Add Mihawk BMC platform
Hello Ben,

Thanks for the patch! Some minor comments below.

On Tue, 30 Jul 2019, at 15:30, Ben Pai wrote:
> The Mihawk BMC is an ASPEED ast2500 based BMC that is part of an
> OpenPower Power9 server.
>
> This adds the device tree description for most upstream components. It
> is a squashed commit from the OpenBMC kernel tree.

That it's a squashed commit isn't relevant, neither is the mention of the OpenBMC
kernel tree. I'd drop both from the commit message.

>
> Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 922 ++++++++++++++++++++
> 2 files changed, 923 insertions(+)
> create mode 100755 arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index eb6de52c1936..262345544359 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1281,5 +1281,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-opp-vesnin.dtb \
> aspeed-bmc-opp-witherspoon.dtb \
> aspeed-bmc-opp-zaius.dtb \
> + aspeed-bmc-opp-mihawk.dtb \
> aspeed-bmc-portwell-neptune.dtb \
> aspeed-bmc-quanta-q71l.dtb
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> new file mode 100755
> index 000000000000..cfa20e0b2939
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> @@ -0,0 +1,922 @@
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/leds/leds-pca955x.h>
> +
> +/ {
> + model = "Mihawk BMC";
> + compatible = "ibm,mihawk-bmc", "aspeed,ast2500";

I think this should be "ips,mihawk-bmc". You may also need to add "ips" to the
vendor-prefixes list.

> +
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + reg = <0x80000000 0x20000000>; /* address and size of RAM(512MB) */
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + flash_memory: region@98000000 {
> + no-map;
> + reg = <0x98000000 0x04000000>; /* 64M */
> + };
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> +
> + video_engine_memory: jpegbuffer {
> + size = <0x02000000>; /* 32MM */
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + air-water {
> + label = "air-water";
> + gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 6)>;
> + };
> +
> + checkstop {
> + label = "checkstop";
> + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(J, 2)>;
> + };
> +
> + ps0-presence {
> + label = "ps0-presence";
> + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(Z, 2)>;
> + };
> +
> + ps1-presence {
> + label = "ps1-presence";
> + gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(Z, 0)>;
> + };
> + id-button {
> + label = "id-button";
> + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 1)>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;

Please remove the #address-cells and #size-cells properties, they aren't
relevant for gpio-keys-polled.

> + poll-interval = <1000>;
> +
> + fan0-presence {
> + label = "fan0-presence";
> + gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
> + linux,code = <9>;
> + };
> +
> + fan1-presence {
> + label = "fan1-presence";
> + gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
> + linux,code = <10>;
> + };
> +
> + fan2-presence {
> + label = "fan2-presence";
> + gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
> + linux,code = <11>;
> + };
> +
> + fan3-presence {
> + label = "fan3-presence";
> + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
> + linux,code = <12>;
> + };
> +
> + fan4-presence {
> + label = "fan4-presence";
> + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
> + linux,code = <13>;
> + };
> +
> + fan5-presence {
> + label = "fan5-presence";
> + gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
> + linux,code = <14>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + fault {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
> + };
> +
> + power {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
> + };
> +
> + rear-id {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + rear-g {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
> + };
> +
> + rear-ok {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
> + };
> +
> + fan0 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan1 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan2 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan3 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan4 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan5 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 5 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + fsi: gpio-fsi {
> + compatible = "fsi-master-gpio", "fsi-master";
> + #address-cells = <2>;
> + #size-cells = <0>;
> + no-gpio-delays;
> +
> + clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
> + data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
> + mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
> + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
> + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
> + };
> + iio-hwmon-12v {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>;
> + };
> +
> + iio-hwmon-5v {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 1>;
> + };
> +
> + iio-hwmon-3v {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 2>;
> + };
> +
> + iio-hwmon-vdd0 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 3>;
> + };
> +
> + iio-hwmon-vdd1 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 4>;
> + };
> +
> + iio-hwmon-vcs0 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 5>;
> + };
> +
> + iio-hwmon-vcs1 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 6>;
> + };
> +
> + iio-hwmon-vdn0 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 7>;
> + };
> +
> + iio-hwmon-vdn1 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 8>;
> + };
> +
> + iio-hwmon-vio0 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 9>;
> + };
> +
> + iio-hwmon-vio1 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 10>;
> + };
> +
> + iio-hwmon-vddra {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 11>;
> + };
> +
> + iio-hwmon-vddrb {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 13>;
> + };
> +
> + iio-hwmon-vddrc {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 14>;
> + };
> +
> + iio-hwmon-vddrd {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 15>;
> + };
> +
> + iio-hwmon-battery {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 12>;
> + };
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + /*compatible = "aspeed,ast2500-pwm-tacho";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x1e786000 0x1000>;
> + clocks = <&pwm_tacho_fixed_clk>;*/
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> + &pinctrl_pwm2_default &pinctrl_pwm3_default
> + &pinctrl_pwm4_default &pinctrl_pwm5_default>;
> +
> + fan@0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00>;
> + };
> +
> + fan@1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x01>;
> + };
> +
> + fan@2 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02>;
> + };
> +
> + fan@3 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x03>;
> + };
> +
> + fan@4 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x04>;
> + };
> +
> + fan@5 {
> + reg = <0x05>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x05>;
> + };
> +
> + fan@6 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x06>;
> + };
> +
> + fan@7 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x07>;
> + };
> +
> + fan@8 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x08>;
> + };
> +
> + fan@9 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x09>;
> + };
> +
> + fan@10 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
> + };
> +
> + fan@11 {
> + reg = <0x05>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + label = "bmc";
> + m25p,fast-read;
> + spi-max-frequency = <50000000>;
> + partitions {
> + #address-cells = < 1 >;
> + #size-cells = < 1 >;
> + compatible = "fixed-partitions";
> + u-boot@0 {
> + reg = < 0 0x60000 >;
> + label = "u-boot";
> + };
> + u-boot-env@60000 {
> + reg = < 0x60000 0x20000 >;
> + label = "u-boot-env";
> + };
> + obmc-ubi@80000 {
> + reg = < 0x80000 0x1F80000 >;
> + label = "obmc-ubi";
> + };
> + };
> + };
> + flash@1 {
> + status = "okay";
> + label = "alt-bmc";
> + m25p,fast-read;
> + spi-max-frequency = <50000000>;
> + partitions {
> + #address-cells = < 1 >;
> + #size-cells = < 1 >;
> + compatible = "fixed-partitions";
> + u-boot@0 {
> + reg = < 0 0x60000 >;
> + label = "alt-u-boot";
> + };
> + u-boot-env@60000 {
> + reg = < 0x60000 0x20000 >;
> + label = "alt-u-boot-env";
> + };
> + obmc-ubi@80000 {
> + reg = < 0x80000 0x1F80000 >;
> + label = "alt-obmc-ubi";
> + };
> + };
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> +
> + flash@0 {
> + status = "okay";
> + label = "pnor";
> + m25p,fast-read;
> + spi-max-frequency = <100000000>;
> + };
> +};
> +
> +&lpc_ctrl {
> + status = "okay";
> + memory-region = <&flash_memory>;
> + flash = <&spi1>;
> +};
> +
> +&uart1 {
> + /* Rear RS-232 connector */
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd1_default
> + &pinctrl_rxd1_default
> + &pinctrl_nrts1_default
> + &pinctrl_ndtr1_default
> + &pinctrl_ndsr1_default
> + &pinctrl_ncts1_default
> + &pinctrl_ndcd1_default
> + &pinctrl_nri1_default>;
> +};
> +
> +&uart2 {
> + /* APSS */
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii1_default>;
> + use-ncsi;
> +};
> +
> +&mac1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&i2c0 {
> + status = "disabled";
> +};
> +
> +&i2c1 {
> + status = "disabled";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + /* SAMTEC P0 */
> + /* SAMTEC P1 */
> +
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + /* APSS */
> + /* CPLD */
> +
> + /* PCA9516 (repeater) ->
> + * CLK Buffer 9FGS9092
> + * CLK Buffer 9DBL0651BKILFT
> + * CLK Buffer 9DBL0651BKILFT
> + * Power Supply 0
> + * Power Supply 1
> + * PCA 9552 LED
> + */
> +
> + power-supply@58 {
> + compatible = "ibm,cffps1";
> + reg = <0x58>;
> + };
> +
> + power-supply@5b {
> + compatible = "ibm,cffps1";
> + reg = <0x5b>;
> + };
> +
> + pca9552: pca9552@60 {
> + compatible = "nxp,pca9552";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + };
> +
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + /* CP0 VDD & VCS : IR35221 */
> + /* CP0 VDN : IR35221 */
> + /* CP0 VIO : IR38064 */
> + /* CP0 VDDR : PXM1330 */
> +
> + ir35221@70 {
> + compatible = "infineon,ir35221";
> + reg = <0x70>;
> + };
> +
> + ir35221@72 {
> + compatible = "infineon,ir35221";
> + reg = <0x72>;
> + };
> +
> +};
> +
> +&i2c5 {
> + status = "okay";
> +
> + /* CP0 VDD & VCS : IR35221 */
> + /* CP0 VDN : IR35221 */
> + /* CP0 VIO : IR38064 */
> + /* CP0 VDDR : PXM1330 */
> +
> + ir35221@70 {
> + compatible = "infineon,ir35221";
> + reg = <0x70>;
> + };
> +
> + ir35221@72 {
> + compatible = "infineon,ir35221";
> + reg = <0x72>;
> + };
> +
> +};
> +
> +&i2c6 {
> + status = "okay";
> +
> + /* pca9548 -> NVMe1 to 8 */
> +
> + pca9548@70 {
> + compatible = "nxp,pca9548";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> + };
> +
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + /* pca9548 -> NVMe9 to 16 */
> +
> + pca9548@70 {
> + compatible = "nxp,pca9548";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> + };
> +
> +};
> +
> +&i2c8 {
> + status = "okay";
> +
> + /* FSI CLK/DAT */

This comment doesn't make sense?

> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c9 {
> + status = "okay";
> +
> + /* pca9545 Riser ->
> + * PCIe x8 Slot3
> + * PCIe x16 slot4
> + * PCIe x8 slot5
> + * I2C BMC RISER PCA9554
> + * BMC SCL/SDA PCA9554
> + * PCA9554
> + */
> +
> + /* pca9545 ->
> + * PCIe x16 Slot1
> + * PCIe x8 slot2
> + * PEX8748
> + */
> +
> + pca9545riser@70 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> +
> + /*interrupt-parent = <&ipic>;*/
> + /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
> + i2c-mux-idle-disconnect;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + pca9545@71 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x71>;
> +
> + /*interrupt-parent = <&ipic>;*/
> + /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
> + i2c-mux-idle-disconnect;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&i2c10 {
> + status = "okay";
> +
> + /* pca9545 Riser ->
> + * PCIe x8 Slot8
> + * PCIe x16 slot9
> + * PCIe x8 slot10
> + * I2C BMC RISER PCA9554
> + * BMC SCL/SDA PCA9554
> + * PCA9554
> + */
> +
> + /* pca9545 ->
> + * PCIe x16 Slot1
> + * PCIe x8 slot2
> + * PEX8748
> + */
> +
> + pca9545riser@70 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> +
> + /*interrupt-parent = <&ipic>;*/
> + /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/

Remove the commented properties.

> + i2c-mux-idle-disconnect;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + pca9545@71 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x71>;
> +
> + /*interrupt-parent = <&ipic>;*/
> + /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/

Again here.

> + i2c-mux-idle-disconnect;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&i2c11 {
> + status = "okay";
> +
> + /* TPM */
> + /* RTC RX8900CE */
> + /* FPGA for power sequence */
> + /* TMP275A */
> + /* TMP275A */
> + /* EMC1462 */
> +
> + tpm@57 {
> + compatible = "infineon,slb9645tt";
> + reg = <0x57>;
> + };
> +
> + rtc@32 {
> + compatible = "epson,rx8900";
> + reg = <0x32>;
> + };
> +
> + tmp275@48 {
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> +
> + tmp275@49 {
> + compatible = "ti,tmp275";
> + reg = <0x49>;
> + };
> +
> + /* chip emc1462 use emc1403 driver */
> + emc1403@4c {
> + compatible = "smsc,emc1403";
> + reg = <0x4c>;
> + };
> +
> +};
> +
> +&i2c12 {
> + status = "okay";
> +
> + /* pca9545 ->
> + * SAS BP1
> + * SAS BP2
> + * NVMe BP
> + * M.2 riser
> + */
> +
> + pca9545@70 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> +
> + /*interrupt-parent = <&ipic>;*/
> + /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> + };
> +
> + i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> + };
> +
> + i2c@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <2>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> + };
> +
> + i2c@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <3>;
> +
> + tmp275@48 {
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> + };
> +
> + };
> +
> +};
> +
> +&i2c13 {
> + status = "okay";
> +
> + /* pca9548 ->
> + * NVMe BP
> + * NVMe HDD17 to 24
> + */
> +
> + pca9548@70 {
> + compatible = "nxp,pca9548";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> + };
> +};
> +
> +&vuart {
> + status = "okay";
> +};
> +
> +&gfx {
> + status = "okay";
> + memory-region = <&gfx_memory>;
> +};
> +
> +&pinctrl {
> + aspeed,external-nodes = <&gfx &lhc>;

This is already provided by aspeed-g5.dtsi, please drop it.

> +};
> +
> +&adc {
> + status = "okay";

Please add the pinmux properties to mux the ADC lines that you're using

> +};
> +
> +&wdt1 {
> + aspeed,reset-type = "none";
> + aspeed,external-signal;
> + aspeed,ext-push-pull;
> + aspeed,ext-active-high;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdtrst1_default>;
> +};
> +
> +&wdt2 {
> + aspeed,alt-boot;
> +};
> +
> +&ibt {
> + status = "okay";
> +};
> +
> +&vhub {
> + status = "okay";
> +};
> +
> +&video {
> + status = "okay";
> + memory-region = <&video_engine_memory>;
> +};
> +
> +#include "ibm-power9-dual.dtsi"
> \ No newline at end of file

Add a newline here to avoid the warning.

> --
> 2.17.1
>
>
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
> This email contains confidential or legally privileged information and
> is for the sole use of its intended recipient.
> Any unauthorized review, use, copying or distribution of this email or
> the content of this email is strictly prohibited.
> If you are not the intended recipient, you may reply to the sender and
> should delete this e-mail immediately.
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
>

Please try to avoid posting footers like this to public mailing lists.

Cheers,

Andrew

\
 
 \ /
  Last update: 2019-07-31 02:53    [W:0.478 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site