Messages in this thread | | | From | Rob Herring <> | Date | Wed, 3 Jul 2019 07:30:00 -0600 | Subject | Re: [PATCH 1/4] dt-bindings: phy: add binding for the Lantiq VRX200 and ARX300 PCIe PHYs |
| |
On Wed, Jul 3, 2019 at 2:58 AM Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote: > > Hi Rob, > > On Wed, Jul 3, 2019 at 1:34 AM Rob Herring <robh+dt@kernel.org> wrote: > > > > On Tue, Jul 2, 2019 at 2:35 PM Martin Blumenstingl > > <martin.blumenstingl@googlemail.com> wrote: > > > > > > Add the bindings for the PCIe PHY on Lantiq VRX200 and ARX300 SoCs. > > > The IP block contains settings for the PHY and a PLL. > > > The PLL mode is configurable through a dedicated #phy-cell in .dts. > > > > > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > > > --- > > > .../bindings/phy/lantiq,vrx200-pcie-phy.yaml | 87 +++++++++++++++++++ > > > .../dt-bindings/phy/phy-lantiq-vrx200-pcie.h | 11 +++ > > > 2 files changed, 98 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml > > > create mode 100644 include/dt-bindings/phy/phy-lantiq-vrx200-pcie.h > > > > > > diff --git a/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml > > > new file mode 100644 > > > index 000000000000..b7b222e772d0 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml > > > @@ -0,0 +1,87 @@ > > > +# SPDX-License-Identifier: GPL-2.0 > > > > The preference is (GPL-2.0 OR BSD-2-Clause) for new bindings. > to make sure I understand this correctly: > the license is then only valid for the bindings - is it fine if the > driver uses GPL-2.0-only?
Yes, as this isn't derived from the driver code nor used by the driver code (though that would be fine).
BTW, 'GPL-2.0-only' is the newer, preferred form of 'GPL-2.0', so I guess we should be using (GPL-2.0-only OR BSD-2-Clause).
> I don't have any datasheet for these SoCs so all my knowledge is based > on the GPL-2.0-only driver from the Lantiq board support package > (called "UGW"). > the .yaml file is 100% my own work so I'm fine with having GPL-2.0 OR > BSD-2-Clause > however, that still has to be compatible with my driver, which I chose > to be GPL-2.0-only because that's the license from the Lantiq board > support package > > > Martin
| |