lkml.org 
[lkml]   [2019]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3] arm64: dts: imx8mq: Add sai3 and sai6 nodes
Date
From
Hi Daniel,

On 2019-07-03 07:10, Daniel Baluta wrote:
> On Wed, Jul 3, 2019 at 4:01 PM Angus Ainslie <angus@akkea.ca> wrote:
>>
>> Hi Andra,
>>
>> I tried this out on linux-next and I'm not able to record or play
>> sound.
>>
>> I also added the sai2 entry to test out our devkit and get a PCM
>> timeout
>> with that.
>
> Hi Angus,
>
> There are still lots of SAI patches that need to be upstream. Me and
> Andra
> will be working on that over this summer.
>
>>
>> On 2019-07-02 07:23, Andra Danciu wrote:
>> > SAI3 and SAI6 nodes are used to connect to an external codec.
>> > They have 1 Tx and 1 Rx dataline.
>> >
>> > Cc: Daniel Baluta <daniel.baluta@nxp.com>
>> > Signed-off-by: Andra Danciu <andradanciu1997@gmail.com>
>> > ---
>> > Changes since v2:
>> > - removed multiple new lines
>> >
>> > Changes since v1:
>> > - Added sai3 node because we need it to enable audio on pico-pi-8m
>> > - Added commit description
>> >
>> > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 29
>> > +++++++++++++++++++++++++++++
>> > 1 file changed, 29 insertions(+)
>> >
>> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
>> > b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
>> > index d09b808eff87..736cf81b695e 100644
>> > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
>> > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
>> > @@ -278,6 +278,20 @@
>> > #size-cells = <1>;
>> > ranges = <0x30000000 0x30000000 0x400000>;
>> >
>> > + sai6: sai@30030000 {
>> > + compatible = "fsl,imx8mq-sai",
>>
>> I don't find this compatible string in sound/soc/fsl/fsl_sai.c. Aren't
>> the registers at a different offset from "fsl,imx6sx-sai".
>
> Yes, you are right on this. We are trying to slowly push all our
> internal-tree
> patches to mainline. Obviously, with started with low hanging fruits,
> DTS
> nodes and small SAI fixes.
>
> Soon, we will start to send patches for SAI IP ipgrade for imx8.
>
>>
>> How is this supposed to work ?
>>
>
> For the moment it won't work unless we will upstream all our SAI
> internal patches.
> But we will get there hopefully this summer.
>

Shouldn't a working driver be upstream before enabling it in the
devicetree ?

Thanks
Angus

> Thanks,
> Daniel.

\
 
 \ /
  Last update: 2019-07-03 15:13    [W:0.051 / U:0.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site