lkml.org 
[lkml]   [2019]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] usb: core: phy: add support for PHY calibration
Hi Marek,

thanks for working on this!

Tested on my XU4
Tested-by: Jochen Sprickerhof <jochen@sprickerhof.de>

* Anand Moon <linux.amoon@gmail.com> [2019-07-23 00:30]:
>Hi Marek,
>
>On Fri, 19 Jul 2019 at 13:43, Marek Szyprowski <m.szyprowski@samsung.com> wrote:
>>
>> Some PHYs (for example Exynos5 USB3.0 DRD PHY) require calibration to be
>> done after every USB HCD reset. Generic PHY framework has been already
>> extended with phy_calibrate() function in commit 36914111e682 ("drivers:
>> phy: add calibrate method"). This patch adds support for it to generic
>> PHY handling code in USB HCD core.
>>
>
>Tested on my XU3 / XU4 / HC1
>Tested-by: Anand Moon <linux.amoon@gmail.com>
>
>
>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> ---
>> drivers/usb/core/hcd.c | 7 +++++++
>> drivers/usb/core/phy.c | 21 +++++++++++++++++++++
>> drivers/usb/core/phy.h | 1 +
>> 3 files changed, 29 insertions(+)
>>
>> diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
>> index 88533938ce19..b89936c1df23 100644
>> --- a/drivers/usb/core/hcd.c
>> +++ b/drivers/usb/core/hcd.c
>> @@ -2291,6 +2291,9 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
>> hcd->state = HC_STATE_RESUMING;
>> status = hcd->driver->bus_resume(hcd);
>> clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
>> + if (status == 0)
>> + status = usb_phy_roothub_calibrate(hcd->phy_roothub);
>> +
>> if (status == 0) {
>> struct usb_device *udev;
>> int port1;
>> @@ -2864,6 +2867,10 @@ int usb_add_hcd(struct usb_hcd *hcd,
>> }
>> hcd->rh_pollable = 1;
>>
>> + retval = usb_phy_roothub_calibrate(hcd->phy_roothub);
>> + if (retval)
>> + goto err_hcd_driver_setup;
>> +
>> /* NOTE: root hub and controller capabilities may not be the same */
>> if (device_can_wakeup(hcd->self.controller)
>> && device_can_wakeup(&hcd->self.root_hub->dev))
>> diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c
>> index 7580493b867a..fb1588e7c282 100644
>> --- a/drivers/usb/core/phy.c
>> +++ b/drivers/usb/core/phy.c
>> @@ -151,6 +151,27 @@ int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub,
>> }
>> EXPORT_SYMBOL_GPL(usb_phy_roothub_set_mode);
>>
>> +int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub)
>> +{
>> + struct usb_phy_roothub *roothub_entry;
>> + struct list_head *head;
>> + int err;
>> +
>> + if (!phy_roothub)
>> + return 0;
>> +
>> + head = &phy_roothub->list;
>> +
>> + list_for_each_entry(roothub_entry, head, list) {
>> + err = phy_calibrate(roothub_entry->phy);
>> + if (err)
>> + return err;
>> + }
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(usb_phy_roothub_calibrate);
>> +
>> int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub)
>> {
>> struct usb_phy_roothub *roothub_entry;
>> diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h
>> index dad564e2d2d4..20a267cd986b 100644
>> --- a/drivers/usb/core/phy.h
>> +++ b/drivers/usb/core/phy.h
>> @@ -18,6 +18,7 @@ int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub);
>>
>> int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub,
>> enum phy_mode mode);
>> +int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub);
>> int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub);
>> void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub);
>>
>> --
>> 2.17.1
>>
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-07-28 18:07    [W:0.155 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site