lkml.org 
[lkml]   [2019]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/1] platform/x86/pcengines-apuv2: add mpcie reset gpio export
From
Date
On 26.07.19 08:21, Florian Eckert wrote:
> On APUx we have also mpcie2/mpcie3 reset pins. To make it possible to reset
> the ports from the userspace, add the definition to this platform
> device. The gpio can then be exported by the legancy gpio subsystem to
> toggle the mpcie reset pin.
>
> Signed-off-by: Florian Eckert <fe@dev.tdt.de>
> ---
>
> v2:
> Noting changed for this patch. Only resend because other patches of
> the series where dropped or updated and resend by other people
>
> drivers/platform/x86/pcengines-apuv2.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/platform/x86/pcengines-apuv2.c b/drivers/platform/x86/pcengines-apuv2.c
> index c1ca931e1fab..f6d8ed100cab 100644
> --- a/drivers/platform/x86/pcengines-apuv2.c
> +++ b/drivers/platform/x86/pcengines-apuv2.c
> @@ -32,6 +32,8 @@
> #define APU2_GPIO_REG_LED3 AMD_FCH_GPIO_REG_GPIO59_DEVSLP1
> #define APU2_GPIO_REG_MODESW AMD_FCH_GPIO_REG_GPIO32_GE1
> #define APU2_GPIO_REG_SIMSWAP AMD_FCH_GPIO_REG_GPIO33_GE2
> +#define APU2_GPIO_REG_MPCIE2 AMD_FCH_GPIO_REG_GPIO59_DEVSLP0
> +#define APU2_GPIO_REG_MPCIE3 AMD_FCH_GPIO_REG_GPIO51
>
> /* order in which the gpio lines are defined in the register list */
> #define APU2_GPIO_LINE_LED1 0
> @@ -39,6 +41,8 @@
> #define APU2_GPIO_LINE_LED3 2
> #define APU2_GPIO_LINE_MODESW 3
> #define APU2_GPIO_LINE_SIMSWAP 4
> +#define APU2_GPIO_LINE_MPCIE2 5
> +#define APU2_GPIO_LINE_MPCIE3 6
>
> /* gpio device */
>
> @@ -48,6 +52,8 @@ static int apu2_gpio_regs[] = {
> [APU2_GPIO_LINE_LED3] = APU2_GPIO_REG_LED3,
> [APU2_GPIO_LINE_MODESW] = APU2_GPIO_REG_MODESW,
> [APU2_GPIO_LINE_SIMSWAP] = APU2_GPIO_REG_SIMSWAP,
> + [APU2_GPIO_LINE_MPCIE2] = APU2_GPIO_REG_MPCIE2,
> + [APU2_GPIO_LINE_MPCIE3] = APU2_GPIO_REG_MPCIE3,
> };
>
> static const char * const apu2_gpio_names[] = {
> @@ -56,6 +62,8 @@ static const char * const apu2_gpio_names[] = {
> [APU2_GPIO_LINE_LED3] = "front-led3",
> [APU2_GPIO_LINE_MODESW] = "front-button",
> [APU2_GPIO_LINE_SIMSWAP] = "simswap",
> + [APU2_GPIO_LINE_MPCIE2] = "mpcie2_reset",
> + [APU2_GPIO_LINE_MPCIE3] = "mpcie3_reset",
> };
>
> static const struct amd_fch_gpio_pdata board_apu2 = {
>

Acked-by: Enrico Weigelt <info@metux.net>

--
Enrico Weigelt, metux IT consult
Free software and Linux embedded engineering
info@metux.net -- +49-151-27565287

\
 
 \ /
  Last update: 2019-07-26 12:50    [W:0.042 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site