Messages in this thread | | | Subject | Re: [PATCH 0/8] ti-sysc related warning fixes for v5.3-rc cycle | From | Keerthy <> | Date | Wed, 24 Jul 2019 11:22:15 +0530 |
| |
On 23/07/19 4:58 PM, Tony Lindgren wrote: > Hi all, > > I noticed that with recent ti-sysc driver changes some new warnings > have crept in. Mostly they are caused by having different configuration > in the dts compared to the legacy platform data. Let's fix these first > before we continue dropping the legacy platform data. > > I also noticed we need two fixes for the ti-sysc driver while looking > at the warnings.
Tony,
Apart from Patch 2(breaks DS0 on AM3). Rest all work fine.
Tested for DS0/RTC+ddr on AM4, DS0 on AM3 Boneblack.
You can add my:
Tested-by: Keerthy <j-keerthy@ti.com>
For all the 7 patches except Patch 2.
Regards, Keerthy
> > Regards, > > Tony > > Tony Lindgren (8): > ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss > ARM: OMAP2+: Remove unconfigured midlemode for am3 lcdc > bus: ti-sysc: Fix handling of forced idle > bus: ti-sysc: Fix using configured sysc mask value > ARM: dts: Drop bogus ahclkr clocks for dra7 mcasp 3 to 8 > ARM: dts: Fix flags for gpio7 > ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7 > ARM: dts: Fix lcdc sysc flags for am3 > > arch/arm/boot/dts/am33xx-l4.dtsi | 6 +++- > arch/arm/boot/dts/am437x-l4.dtsi | 4 +++ > .../boot/dts/am57xx-beagle-x15-common.dtsi | 2 +- > arch/arm/boot/dts/dra7-evm.dts | 2 +- > arch/arm/boot/dts/dra7-l4.dtsi | 31 ++++++++----------- > arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 2 +- > arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 3 +- > drivers/bus/ti-sysc.c | 10 +++--- > 8 files changed, 31 insertions(+), 29 deletions(-) >
| |