lkml.org 
[lkml]   [2019]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] extcon: fsa9480: Support the FSA880 variant
Date
The older compatible variant of this chip is called FSA880
and works the same way, if we need some quirks in the future,
it is good to let it have its own compatible string.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt | 4 +++-
drivers/extcon/extcon-fsa9480.c | 1 +
2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
index d592c21245f2..624bd76f468e 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
@@ -5,7 +5,9 @@ controlled using I2C and enables USB data, stereo and mono audio, video,
microphone, and UART data to use a common connector port.

Required properties:
- - compatible : Must be "fcs,fsa9480"
+ - compatible : Must be one of
+ "fcs,fsa9480"
+ "fcs,fsa880"
- reg : Specifies i2c slave address. Must be 0x25.
- interrupts : Should contain one entry specifying interrupt signal of
interrupt parent to which interrupt pin of the chip is connected.
diff --git a/drivers/extcon/extcon-fsa9480.c b/drivers/extcon/extcon-fsa9480.c
index 350fb34abfa0..8405512f5199 100644
--- a/drivers/extcon/extcon-fsa9480.c
+++ b/drivers/extcon/extcon-fsa9480.c
@@ -363,6 +363,7 @@ MODULE_DEVICE_TABLE(i2c, fsa9480_id);

static const struct of_device_id fsa9480_of_match[] = {
{ .compatible = "fcs,fsa9480", },
+ { .compatible = "fcs,fsa880", },
{ },
};
MODULE_DEVICE_TABLE(of, fsa9480_of_match);
--
2.21.0
\
 
 \ /
  Last update: 2019-07-23 19:44    [W:0.041 / U:1.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site