lkml.org 
[lkml]   [2019]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4] mmc: host: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming
On Tue, 23 Jul 2019 at 05:05, Baolin Wang <baolin.wang@linaro.org> wrote:
>
> Hi Ulf,
>
> On Mon, 22 Jul 2019 at 19:54, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> >
> > On Wed, 17 Jul 2019 at 04:29, Baolin Wang <baolin.wang@linaro.org> wrote:
> > >
> > > In sdhci_runtime_resume_host() function, we will always do software reset
> > > for all, which will cause Spreadtrum host controller work abnormally after
> > > resuming.
> >
> > What does "software reset for all" means?
>
> The SD host controller specification defines 3 types software reset:
> software reset for data line, software reset for command line and
> software reset for all.
> Software reset for all means this reset affects the entire Host
> controller except for the card detection circuit.

Thanks for clarifying, please update the changelog accordingly.

>
> >
> > >
> > > Thus for Spreadtrum platform that will not power down the SD/eMMC card during
> > > runtime suspend, we should not do software reset for all.
> >
> > Normally, sdhci hosts that enters runtime suspend doesn't power off
> > the card (there are some exceptions like PCI variants).
>
> Yes, same as our controller.
>
> >
> > So, what's so special here and how does the reset come into play? I
> > don't see sdhci doing a reset in sdhci_runtime_suspend|resume_host()
> > and nor doesn the callback from the sdhci-sprd.c variant doing it.
>
> In sdhci_runtime_resume_host(), it will issue sdhci_init(host, 0) to
> issue software reset for all.

Aha, I didn't read the code carefully enough. Apologize for the noise.

>
> >
> > > To fix this
> > > issue, adding a specific reset operation that adds one condition to validate
> > > the power mode to decide if we can do software reset for all or just reset
> > > command and data lines.
> > >
> > > Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> > > ---
> > > Changess from v3:
> > > - Use ios.power_mode to validate if the card is power down or not.
> > >
> > > Changes from v2:
> > > - Simplify the sdhci_sprd_reset() by issuing sdhci_reset().
> > >
> > > Changes from v1:
> > > - Add a specific reset operation instead of changing the core to avoid
> > > affecting other hardware.
> > > ---
> > > drivers/mmc/host/sdhci-sprd.c | 19 ++++++++++++++++++-
> > > 1 file changed, 18 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
> > > index 603a5d9..94f9726 100644
> > > --- a/drivers/mmc/host/sdhci-sprd.c
> > > +++ b/drivers/mmc/host/sdhci-sprd.c
> > > @@ -373,6 +373,23 @@ static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host)
> > > return 1 << 31;
> > > }
> > >
> > > +static void sdhci_sprd_reset(struct sdhci_host *host, u8 mask)
> > > +{
> > > + struct mmc_host *mmc = host->mmc;
> > > +
> > > + /*
> > > + * When try to reset controller after runtime suspend, we should not
> > > + * reset for all if the SD/eMMC card is not power down, just reset
> > > + * command and data lines instead. Otherwise will meet some strange
> > > + * behaviors for Spreadtrum host controller.
> > > + */
> > > + if (host->runtime_suspended && (mask & SDHCI_RESET_ALL) &&
> > > + mmc->ios.power_mode == MMC_POWER_ON)
> > > + mask = SDHCI_RESET_CMD | SDHCI_RESET_DATA;
> >
> > Can sdhci_sprd_reset() be called when the host is runtime suspended?
>
> When host tries to runtime resume in sdhci_runtime_resume_host(), it
> will call reset operation to do software reset.

Right, I see that now, thanks for clarifying.

However, there are still some weird things going on in
sdhci_runtime_resume_host(). Like why is host->ops->enable_dma()
called first, directly from sdhci_runtime_resume_host(), then again in
sdhci_do_reset(), after host->ops->reset() has been called. Looks like
the first call to ->enable_dma() doesn't make sense?

>
> > That sounds like a bug to me, no?
>
> Since our controller will meet some strange behaviors if we do
> software reset for all in sdhci_runtime_resume_host(), and try to
> avoid changing the core logic of sdhci_runtime_resume_host() used by
> other hardware controllers, thus I introduced a specific reset ops and
> added some condition to make sure we just do software reset command
> and data lines from runtime suspend state.

I understand, but perhaps it would become more clear if
sdhci_runtime_resume_host() is re-factored a bit. Maybe the caller can
give it some new parameter to let it decide if a SDHCI_RESET_ALL shall
be done or not.

>
> >
> > > +
> > > + sdhci_reset(host, mask);
> > > +}
> > > +
> > > static struct sdhci_ops sdhci_sprd_ops = {
> > > .read_l = sdhci_sprd_readl,
> > > .write_l = sdhci_sprd_writel,
> > > @@ -381,7 +398,7 @@ static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host)
> > > .get_max_clock = sdhci_sprd_get_max_clock,
> > > .get_min_clock = sdhci_sprd_get_min_clock,
> > > .set_bus_width = sdhci_set_bus_width,
> > > - .reset = sdhci_reset,
> > > + .reset = sdhci_sprd_reset,
> > > .set_uhs_signaling = sdhci_sprd_set_uhs_signaling,
> > > .hw_reset = sdhci_sprd_hw_reset,
> > > .get_max_timeout_count = sdhci_sprd_get_max_timeout_count,
> > > --
> > > 1.7.9.5
> > >

Kind regards
Uffe

\
 
 \ /
  Last update: 2019-07-23 14:39    [W:0.081 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site