lkml.org 
[lkml]   [2019]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] driver core: Remove device link creation limitation
Hi Greg,

On Tue, Jul 16, 2019 at 5:21 PM Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
>
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Subject: [PATCH] driver core: Remove device link creation limitation
>
> If device_link_add() is called for a consumer/supplier pair with an
> existing device link between them and the existing link's type is
> not in agreement with the flags passed to that function by its
> caller, NULL will be returned. That is seriously inconvenient,
> because it forces the callers of device_link_add() to worry about
> what others may or may not do even if that is not relevant to them
> for any other reasons.
>
> It turns out, however, that this limitation can be made go away
> relatively easily.
>
> The underlying observation is that if DL_FLAG_STATELESS has been
> passed to device_link_add() in flags for the given consumer/supplier
> pair at least once, calling either device_link_del() or
> device_link_remove() to release the link returned by it should work,
> but there are no other requirements associated with that flag. In
> turn, if at least one of the callers of device_link_add() for the
> given consumer/supplier pair has not passed DL_FLAG_STATELESS to it
> in flags, the driver core should track the status of the link and act
> on it as appropriate (ie. the link should be treated as "managed").
> This means that DL_FLAG_STATELESS needs to be set for managed device
> links and it should be valid to call device_link_del() or
> device_link_remove() to drop references to them in certain
> sutiations.
>
> To allow that to happen, introduce a new (internal) device link flag
> called DL_FLAG_MANAGED and make device_link_add() set it automatically
> whenever DL_FLAG_STATELESS is not passed to it. Also make it take
> additional references to existing device links that were previously
> stateless (that is, with DL_FLAG_STATELESS set and DL_FLAG_MANAGED
> unset) and will need to be managed going forward and initialize
> their status (which has been DL_STATE_NONE so far).
>
> Accordingly, when a managed device link is dropped automatically
> by the driver core, make it clear DL_FLAG_MANAGED, reset the link's
> status back to DL_STATE_NONE and drop the reference to it associated
> with DL_FLAG_MANAGED instead of just deleting it right away (to
> allow it to stay around in case it still needs to be released
> explicitly by someone).
>
> With that, since setting DL_FLAG_STATELESS doesn't mean that the
> device link in question is not managed any more, replace all of the
> status-tracking checks against DL_FLAG_STATELESS with analogous
> checks against DL_FLAG_MANAGED and update the documentation to
> reflect these changes.
>
> While at it, make device_link_add() reject flags that it does not
> recognize, including DL_FLAG_MANAGED.
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Reviewed-by: Saravana Kannan <saravanak@google.com>
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>

Do I need to resend this?

I know that posting new things during a merge window is not most
convenient, sorry about that.

> ---
>
> -> v2:
> * Add a check to device_link_add() to return NULL if unrecognized flags are
> passed to it.
> * Modify kerneldoc comments around DL_FLAG_MANAGED.
>
> I've tentatively added the Tested-by tag from Marek, because I don't expect
> the changes made between the initial posting and the v2 to make any difference
> for him.
>
> ---
> Documentation/driver-api/device_link.rst | 4
> drivers/base/core.c | 176 +++++++++++++++++--------------
> drivers/base/power/runtime.c | 4
> include/linux/device.h | 4
> 4 files changed, 106 insertions(+), 82 deletions(-)
>
> Index: linux-pm/drivers/base/core.c
> ===================================================================
> --- linux-pm.orig/drivers/base/core.c
> +++ linux-pm/drivers/base/core.c
> @@ -124,6 +124,50 @@ static int device_is_dependent(struct de
> return ret;
> }
>
> +static void device_link_init_status(struct device_link *link,
> + struct device *consumer,
> + struct device *supplier)
> +{
> + switch (supplier->links.status) {
> + case DL_DEV_PROBING:
> + switch (consumer->links.status) {
> + case DL_DEV_PROBING:
> + /*
> + * A consumer driver can create a link to a supplier
> + * that has not completed its probing yet as long as it
> + * knows that the supplier is already functional (for
> + * example, it has just acquired some resources from the
> + * supplier).
> + */
> + link->status = DL_STATE_CONSUMER_PROBE;
> + break;
> + default:
> + link->status = DL_STATE_DORMANT;
> + break;
> + }
> + break;
> + case DL_DEV_DRIVER_BOUND:
> + switch (consumer->links.status) {
> + case DL_DEV_PROBING:
> + link->status = DL_STATE_CONSUMER_PROBE;
> + break;
> + case DL_DEV_DRIVER_BOUND:
> + link->status = DL_STATE_ACTIVE;
> + break;
> + default:
> + link->status = DL_STATE_AVAILABLE;
> + break;
> + }
> + break;
> + case DL_DEV_UNBINDING:
> + link->status = DL_STATE_SUPPLIER_UNBIND;
> + break;
> + default:
> + link->status = DL_STATE_DORMANT;
> + break;
> + }
> +}
> +
> static int device_reorder_to_tail(struct device *dev, void *not_used)
> {
> struct device_link *link;
> @@ -165,6 +209,10 @@ void device_pm_move_to_tail(struct devic
> device_links_read_unlock(idx);
> }
>
> +#define DL_MANAGED_LINK_FLAGS (DL_FLAG_AUTOREMOVE_CONSUMER | \
> + DL_FLAG_AUTOREMOVE_SUPPLIER | \
> + DL_FLAG_AUTOPROBE_CONSUMER)
> +
> /**
> * device_link_add - Create a link between two devices.
> * @consumer: Consumer end of the link.
> @@ -179,9 +227,9 @@ void device_pm_move_to_tail(struct devic
> * of the link. If DL_FLAG_PM_RUNTIME is not set, DL_FLAG_RPM_ACTIVE will be
> * ignored.
> *
> - * If DL_FLAG_STATELESS is set in @flags, the link is not going to be managed by
> - * the driver core and, in particular, the caller of this function is expected
> - * to drop the reference to the link acquired by it directly.
> + * If DL_FLAG_STATELESS is set in @flags, the caller of this function is
> + * expected to release the link returned by it directly with the help of either
> + * device_link_del() or device_link_remove().
> *
> * If that flag is not set, however, the caller of this function is handing the
> * management of the link over to the driver core entirely and its return value
> @@ -201,9 +249,16 @@ void device_pm_move_to_tail(struct devic
> * be used to request the driver core to automaticall probe for a consmer
> * driver after successfully binding a driver to the supplier device.
> *
> - * The combination of DL_FLAG_STATELESS and either DL_FLAG_AUTOREMOVE_CONSUMER
> - * or DL_FLAG_AUTOREMOVE_SUPPLIER set in @flags at the same time is invalid and
> - * will cause NULL to be returned upfront.
> + * The combination of DL_FLAG_STATELESS and one of DL_FLAG_AUTOREMOVE_CONSUMER,
> + * DL_FLAG_AUTOREMOVE_SUPPLIER, or DL_FLAG_AUTOPROBE_CONSUMER set in @flags at
> + * the same time is invalid and will cause NULL to be returned upfront.
> + * However, if a device link between the given @consumer and @supplier pair
> + * exists already when this function is called for them, the existing link will
> + * be returned regardless of its current type and status (the link's flags may
> + * be modified then). The caller of this function is then expected to treat
> + * the link as though it has just been created, so (in particular) if
> + * DL_FLAG_STATELESS was passed in @flags, the link needs to be released
> + * explicitly when not needed any more (as stated above).
> *
> * A side effect of the link creation is re-ordering of dpm_list and the
> * devices_kset list by moving the consumer device and all devices depending
> @@ -220,10 +275,8 @@ struct device_link *device_link_add(stru
> struct device_link *link;
>
> if (!consumer || !supplier ||
> - (flags & DL_FLAG_STATELESS &&
> - flags & (DL_FLAG_AUTOREMOVE_CONSUMER |
> - DL_FLAG_AUTOREMOVE_SUPPLIER |
> - DL_FLAG_AUTOPROBE_CONSUMER)) ||
> + (flags & ~(DL_FLAG_STATELESS | DL_MANAGED_LINK_FLAGS)) ||
> + (flags & DL_FLAG_STATELESS && flags & DL_MANAGED_LINK_FLAGS) ||
> (flags & DL_FLAG_AUTOPROBE_CONSUMER &&
> flags & (DL_FLAG_AUTOREMOVE_CONSUMER |
> DL_FLAG_AUTOREMOVE_SUPPLIER)))
> @@ -236,6 +289,9 @@ struct device_link *device_link_add(stru
> }
> }
>
> + if (!(flags & DL_FLAG_STATELESS))
> + flags |= DL_FLAG_MANAGED;
> +
> device_links_write_lock();
> device_pm_lock();
>
> @@ -262,15 +318,6 @@ struct device_link *device_link_add(stru
> if (link->consumer != consumer)
> continue;
>
> - /*
> - * Don't return a stateless link if the caller wants a stateful
> - * one and vice versa.
> - */
> - if (WARN_ON((flags & DL_FLAG_STATELESS) != (link->flags & DL_FLAG_STATELESS))) {
> - link = NULL;
> - goto out;
> - }
> -
> if (flags & DL_FLAG_PM_RUNTIME) {
> if (!(link->flags & DL_FLAG_PM_RUNTIME)) {
> pm_runtime_new_link(consumer);
> @@ -281,6 +328,7 @@ struct device_link *device_link_add(stru
> }
>
> if (flags & DL_FLAG_STATELESS) {
> + link->flags |= DL_FLAG_STATELESS;
> kref_get(&link->kref);
> goto out;
> }
> @@ -299,6 +347,11 @@ struct device_link *device_link_add(stru
> link->flags &= ~(DL_FLAG_AUTOREMOVE_CONSUMER |
> DL_FLAG_AUTOREMOVE_SUPPLIER);
> }
> + if (!(link->flags & DL_FLAG_MANAGED)) {
> + kref_get(&link->kref);
> + link->flags |= DL_FLAG_MANAGED;
> + device_link_init_status(link, consumer, supplier);
> + }
> goto out;
> }
>
> @@ -325,48 +378,10 @@ struct device_link *device_link_add(stru
> kref_init(&link->kref);
>
> /* Determine the initial link state. */
> - if (flags & DL_FLAG_STATELESS) {
> + if (flags & DL_FLAG_STATELESS)
> link->status = DL_STATE_NONE;
> - } else {
> - switch (supplier->links.status) {
> - case DL_DEV_PROBING:
> - switch (consumer->links.status) {
> - case DL_DEV_PROBING:
> - /*
> - * A consumer driver can create a link to a
> - * supplier that has not completed its probing
> - * yet as long as it knows that the supplier is
> - * already functional (for example, it has just
> - * acquired some resources from the supplier).
> - */
> - link->status = DL_STATE_CONSUMER_PROBE;
> - break;
> - default:
> - link->status = DL_STATE_DORMANT;
> - break;
> - }
> - break;
> - case DL_DEV_DRIVER_BOUND:
> - switch (consumer->links.status) {
> - case DL_DEV_PROBING:
> - link->status = DL_STATE_CONSUMER_PROBE;
> - break;
> - case DL_DEV_DRIVER_BOUND:
> - link->status = DL_STATE_ACTIVE;
> - break;
> - default:
> - link->status = DL_STATE_AVAILABLE;
> - break;
> - }
> - break;
> - case DL_DEV_UNBINDING:
> - link->status = DL_STATE_SUPPLIER_UNBIND;
> - break;
> - default:
> - link->status = DL_STATE_DORMANT;
> - break;
> - }
> - }
> + else
> + device_link_init_status(link, consumer, supplier);
>
> /*
> * Some callers expect the link creation during consumer driver probe to
> @@ -528,7 +543,7 @@ static void device_links_missing_supplie
> * mark the link as "consumer probe in progress" to make the supplier removal
> * wait for us to complete (or bad things may happen).
> *
> - * Links with the DL_FLAG_STATELESS flag set are ignored.
> + * Links without the DL_FLAG_MANAGED flag set are ignored.
> */
> int device_links_check_suppliers(struct device *dev)
> {
> @@ -538,7 +553,7 @@ int device_links_check_suppliers(struct
> device_links_write_lock();
>
> list_for_each_entry(link, &dev->links.suppliers, c_node) {
> - if (link->flags & DL_FLAG_STATELESS)
> + if (!(link->flags & DL_FLAG_MANAGED))
> continue;
>
> if (link->status != DL_STATE_AVAILABLE) {
> @@ -563,7 +578,7 @@ int device_links_check_suppliers(struct
> *
> * Also change the status of @dev's links to suppliers to "active".
> *
> - * Links with the DL_FLAG_STATELESS flag set are ignored.
> + * Links without the DL_FLAG_MANAGED flag set are ignored.
> */
> void device_links_driver_bound(struct device *dev)
> {
> @@ -572,7 +587,7 @@ void device_links_driver_bound(struct de
> device_links_write_lock();
>
> list_for_each_entry(link, &dev->links.consumers, s_node) {
> - if (link->flags & DL_FLAG_STATELESS)
> + if (!(link->flags & DL_FLAG_MANAGED))
> continue;
>
> /*
> @@ -593,7 +608,7 @@ void device_links_driver_bound(struct de
> }
>
> list_for_each_entry(link, &dev->links.suppliers, c_node) {
> - if (link->flags & DL_FLAG_STATELESS)
> + if (!(link->flags & DL_FLAG_MANAGED))
> continue;
>
> WARN_ON(link->status != DL_STATE_CONSUMER_PROBE);
> @@ -605,6 +620,13 @@ void device_links_driver_bound(struct de
> device_links_write_unlock();
> }
>
> +static void device_link_drop_managed(struct device_link *link)
> +{
> + link->flags &= ~DL_FLAG_MANAGED;
> + WRITE_ONCE(link->status, DL_STATE_NONE);
> + kref_put(&link->kref, __device_link_del);
> +}
> +
> /**
> * __device_links_no_driver - Update links of a device without a driver.
> * @dev: Device without a drvier.
> @@ -615,18 +637,18 @@ void device_links_driver_bound(struct de
> * unless they already are in the "supplier unbind in progress" state in which
> * case they need not be updated.
> *
> - * Links with the DL_FLAG_STATELESS flag set are ignored.
> + * Links without the DL_FLAG_MANAGED flag set are ignored.
> */
> static void __device_links_no_driver(struct device *dev)
> {
> struct device_link *link, *ln;
>
> list_for_each_entry_safe_reverse(link, ln, &dev->links.suppliers, c_node) {
> - if (link->flags & DL_FLAG_STATELESS)
> + if (!(link->flags & DL_FLAG_MANAGED))
> continue;
>
> if (link->flags & DL_FLAG_AUTOREMOVE_CONSUMER)
> - __device_link_del(&link->kref);
> + device_link_drop_managed(link);
> else if (link->status == DL_STATE_CONSUMER_PROBE ||
> link->status == DL_STATE_ACTIVE)
> WRITE_ONCE(link->status, DL_STATE_AVAILABLE);
> @@ -643,7 +665,7 @@ static void __device_links_no_driver(str
> * %__device_links_no_driver() to update links to suppliers for it as
> * appropriate.
> *
> - * Links with the DL_FLAG_STATELESS flag set are ignored.
> + * Links without the DL_FLAG_MANAGED flag set are ignored.
> */
> void device_links_no_driver(struct device *dev)
> {
> @@ -652,7 +674,7 @@ void device_links_no_driver(struct devic
> device_links_write_lock();
>
> list_for_each_entry(link, &dev->links.consumers, s_node) {
> - if (link->flags & DL_FLAG_STATELESS)
> + if (!(link->flags & DL_FLAG_MANAGED))
> continue;
>
> /*
> @@ -680,7 +702,7 @@ void device_links_no_driver(struct devic
> * invoke %__device_links_no_driver() to update links to suppliers for it as
> * appropriate.
> *
> - * Links with the DL_FLAG_STATELESS flag set are ignored.
> + * Links without the DL_FLAG_MANAGED flag set are ignored.
> */
> void device_links_driver_cleanup(struct device *dev)
> {
> @@ -689,7 +711,7 @@ void device_links_driver_cleanup(struct
> device_links_write_lock();
>
> list_for_each_entry_safe(link, ln, &dev->links.consumers, s_node) {
> - if (link->flags & DL_FLAG_STATELESS)
> + if (!(link->flags & DL_FLAG_MANAGED))
> continue;
>
> WARN_ON(link->flags & DL_FLAG_AUTOREMOVE_CONSUMER);
> @@ -702,7 +724,7 @@ void device_links_driver_cleanup(struct
> */
> if (link->status == DL_STATE_SUPPLIER_UNBIND &&
> link->flags & DL_FLAG_AUTOREMOVE_SUPPLIER)
> - __device_link_del(&link->kref);
> + device_link_drop_managed(link);
>
> WRITE_ONCE(link->status, DL_STATE_DORMANT);
> }
> @@ -724,7 +746,7 @@ void device_links_driver_cleanup(struct
> *
> * Return 'false' if there are no probing or active consumers.
> *
> - * Links with the DL_FLAG_STATELESS flag set are ignored.
> + * Links without the DL_FLAG_MANAGED flag set are ignored.
> */
> bool device_links_busy(struct device *dev)
> {
> @@ -734,7 +756,7 @@ bool device_links_busy(struct device *de
> device_links_write_lock();
>
> list_for_each_entry(link, &dev->links.consumers, s_node) {
> - if (link->flags & DL_FLAG_STATELESS)
> + if (!(link->flags & DL_FLAG_MANAGED))
> continue;
>
> if (link->status == DL_STATE_CONSUMER_PROBE
> @@ -764,7 +786,7 @@ bool device_links_busy(struct device *de
> * driver to unbind and start over (the consumer will not re-probe as we have
> * changed the state of the link already).
> *
> - * Links with the DL_FLAG_STATELESS flag set are ignored.
> + * Links without the DL_FLAG_MANAGED flag set are ignored.
> */
> void device_links_unbind_consumers(struct device *dev)
> {
> @@ -776,7 +798,7 @@ void device_links_unbind_consumers(struc
> list_for_each_entry(link, &dev->links.consumers, s_node) {
> enum device_link_state status;
>
> - if (link->flags & DL_FLAG_STATELESS)
> + if (!(link->flags & DL_FLAG_MANAGED))
> continue;
>
> status = link->status;
> Index: linux-pm/drivers/base/power/runtime.c
> ===================================================================
> --- linux-pm.orig/drivers/base/power/runtime.c
> +++ linux-pm/drivers/base/power/runtime.c
> @@ -1624,7 +1624,7 @@ void pm_runtime_remove(struct device *de
> * runtime PM references to the device, drop the usage counter of the device
> * (as many times as needed).
> *
> - * Links with the DL_FLAG_STATELESS flag set are ignored.
> + * Links with the DL_FLAG_MANAGED flag unset are ignored.
> *
> * Since the device is guaranteed to be runtime-active at the point this is
> * called, nothing else needs to be done here.
> @@ -1641,7 +1641,7 @@ void pm_runtime_clean_up_links(struct de
> idx = device_links_read_lock();
>
> list_for_each_entry_rcu(link, &dev->links.consumers, s_node) {
> - if (link->flags & DL_FLAG_STATELESS)
> + if (!(link->flags & DL_FLAG_MANAGED))
> continue;
>
> while (refcount_dec_not_one(&link->rpm_active))
> Index: linux-pm/include/linux/device.h
> ===================================================================
> --- linux-pm.orig/include/linux/device.h
> +++ linux-pm/include/linux/device.h
> @@ -829,12 +829,13 @@ enum device_link_state {
> /*
> * Device link flags.
> *
> - * STATELESS: The core won't track the presence of supplier/consumer drivers.
> + * STATELESS: The core will not remove this link automatically.
> * AUTOREMOVE_CONSUMER: Remove the link automatically on consumer driver unbind.
> * PM_RUNTIME: If set, the runtime PM framework will use this link.
> * RPM_ACTIVE: Run pm_runtime_get_sync() on the supplier during link creation.
> * AUTOREMOVE_SUPPLIER: Remove the link automatically on supplier driver unbind.
> * AUTOPROBE_CONSUMER: Probe consumer driver automatically after supplier binds.
> + * MANAGED: The core tracks presence of supplier/consumer drivers (internal).
> */
> #define DL_FLAG_STATELESS BIT(0)
> #define DL_FLAG_AUTOREMOVE_CONSUMER BIT(1)
> @@ -842,6 +843,7 @@ enum device_link_state {
> #define DL_FLAG_RPM_ACTIVE BIT(3)
> #define DL_FLAG_AUTOREMOVE_SUPPLIER BIT(4)
> #define DL_FLAG_AUTOPROBE_CONSUMER BIT(5)
> +#define DL_FLAG_MANAGED BIT(6)
>
> /**
> * struct device_link - Device link representation.
> Index: linux-pm/Documentation/driver-api/device_link.rst
> ===================================================================
> --- linux-pm.orig/Documentation/driver-api/device_link.rst
> +++ linux-pm/Documentation/driver-api/device_link.rst
> @@ -78,8 +78,8 @@ typically deleted in its ``->remove`` ca
> driver is compiled as a module, the device link is added on module load and
> orderly deleted on unload. The same restrictions that apply to device link
> addition (e.g. exclusion of a parallel suspend/resume transition) apply equally
> -to deletion. Device links with ``DL_FLAG_STATELESS`` unset (i.e. managed
> -device links) are deleted automatically by the driver core.
> +to deletion. Device links managed by the driver core are deleted automatically
> +by it.
>
> Several flags may be specified on device link addition, two of which
> have already been mentioned above: ``DL_FLAG_STATELESS`` to express that no
>
>
>

\
 
 \ /
  Last update: 2019-07-23 09:36    [W:0.107 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site