lkml.org 
[lkml]   [2019]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2] arm64: dts: fsl: pico-pi: Add a device tree for the PICO-PI-IMX8M
Date
Sorry for top posting. I'm replying using mobile phone and outlook web app... 

gpio_intr is not needed. Irq must be given using the standard irq property. gpio_intr has been used in an old draft driver - I assume the dts originates from NXP bsp which used the old driver.

Br,
Matti Vaittinen

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then, he vanished ~~~


________________________________________
From: Shawn Guo [shawnguo@kernel.org]
Sent: Monday, July 22, 2019 5:03 AM
To: Andra Danciu
Cc: robh+dt@kernel.org; mark.rutland@arm.com; leoyang.li@nxp.com; Fabio Estevam; aisheng.dong@nxp.com; l.stach@pengutronix.de; angus@akkea.ca; vabhav.sharma@nxp.com; pankaj.bansal@nxp.com; bhaskar.upadhaya@nxp.com; ping.bai@nxp.com; Manivannan Sadhasivam; Richard Hu; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; Vaittinen, Matti; linux-imx@nxp.com; Daniel Baluta
Subject: Re: [PATCH v2] arm64: dts: fsl: pico-pi: Add a device tree for the PICO-PI-IMX8M

On Thu, Jul 18, 2019 at 02:12:10PM +0300, Andra Danciu wrote:
...
> > > + pmic: pmic@4b {
> > > + reg = <0x4b>;
> > > + compatible = "rohm,bd71837";
> > > + /* PMIC BD71837 PMIC_nINT GPIO1_IO12 */
> > > + pinctrl-0 = <&pinctrl_pmic>;
> > > + gpio_intr = <&gpio1 3 GPIO_ACTIVE_LOW>;
> >
> > Where is the bindings for this property?
> Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt

I do not see property 'gpio_intr' in there.

Shawn

\
 
 \ /
  Last update: 2019-07-22 19:41    [W:0.069 / U:1.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site