lkml.org 
[lkml]   [2019]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 148/158] Bluetooth: Add new 13d3:3501 QCA_ROME device
Date
From: João Paulo Rechi Vita <jprvita@gmail.com>

[ Upstream commit 881cec4f6b4da78e54b73c046a60f39315964c7d ]

Without the QCA ROME setup routine this adapter fails to establish a SCO
connection.

T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3501 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btusb.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index f494fa30a912..75cf605f54e5 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -279,6 +279,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x13d3, 0x3491), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME },
+ { USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME },

/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
--
2.20.1
\
 
 \ /
  Last update: 2019-07-15 17:46    [W:2.813 / U:1.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site